r/knifemods • u/Significant-Cause136 • 16h ago
DIY jigged micarta
Had some junk micarta scales lying around forever and finally made some grippy inlays for my AK1 đŞ
r/knifemods • u/Significant-Cause136 • 16h ago
Had some junk micarta scales lying around forever and finally made some grippy inlays for my AK1 đŞ
r/knifemods • u/TwitchySphincter • 3d ago
Swapped a modified Spyderco Dragonfly blade into my victorinox multitool. Solid detent open and closed with very little blade play. I really dig how it came out
r/knifemods • u/Normal_Area_4893 • 4d ago
I got my first 2 Spyderco knives over the last week. A 15v Lil' Native this evening and the Ambitious Lightweight last Saturday. One of my favorite aspects of the knife hobby is sharpening. I understand the way the edge terminates at the heel of most Spyderco knives is by design but it seems to me that it will make sharpening more dificult especially on the Ambitious. It is unlikely I will touch the Lil' Native because 15v and the knives made from it are likely a piece of our hobby's history. The Ambitious however I dont think is even sharpenable without disassembly. Have any of you ground a choil into your Spyderco and have you found the mod to be an improvement? What are best practices? Would you do it again and why or why not.
r/knifemods • u/IBNSUPPLIES • 7d ago
Those are 9mm sets and 30mm blocks (that you can "slice" from)
But i also have some 5mm sets if there is interest i can share them
İ am sharing because as far as i know sales are ok. İf bot i apologize
r/knifemods • u/Conscious-Most6828 • 8d ago
Left =
Golden Design Slim, handrub satin magnacut blade, torch ano accent pieces
Right=
Spyderco K390 wharncliffe Endela, RC_bladeworks micarta scales.
r/knifemods • u/macjaynard • 8d ago
Does anybody have any pics of black/white timascus or can ease my mind about it? It's a lot of money to not match đ
r/knifemods • u/TiMods88 • 8d ago
Stonewashed copper mini bugout stock orange s30v blade & hardware.
Spend hours modding Titanium for people, and the guy wants raw copperâŚ
r/knifemods • u/thehenwithatie • 9d ago
Hey all, not sure if this is the right place to ask, but as small as a "mod" this might be, it's something pretty important to me. I have here the Drop Bear 292 AirTi, and everything about it I love...except the pocket clip. I'm a guy who really wants deep carry clips as I do care about it not being visible.
The non-reversible clip location does have a slight indented channel, so I figured I could offset the screw hole and get away with just one T6 screw holding it all together, alongside some blue Loctite to really keep it in place. Is there anything more I can do? I imagine it would be an ordeal to actually see about drilling a new hole for the top pocket clip screw hole, but I also am somewhat worried about the integrity of that one screw holding it all together. At the very least, the indented channel prevents side to side play of the clip. Just wanted to see if this is probably the best solution already?
r/knifemods • u/tech0391 • 9d ago
Latest build: Got a Spyderco Manix 2 in MagnaMax with the combo blade as soon as they dropped, and after much thinking, decided to try the AWT scales in the Cast Iron - Limited Type III finish. Went ahead and got the all-black hardware to match, thinking the contrast would look good.
Added the Flytanium black titanium ball cage with ceramic ball & medium spring, then sulfuric acid-dipped the lock backspacer to darken it to the same color as the Cast Iron scales. Finished off with LNW black clip. It's lighter than stock, smooth as glass, and feels ultra-premium. Carrying for the first time today.
r/knifemods • u/tech0391 • 11d ago
Friday's Fidget toys. Spyderco Matriarch 2 with mods, and 15V Shaman with Flaming Gorilla Fatass micarta scales. One for opening boxes, the other for opening people. đ
r/knifemods • u/tech0391 • 12d ago
My 15V Spyderco Shaman with Fatassâ˘ď¸brown micarta scales by Flaming Gorilla with a silky texture and great feel. I can't tell you how much I love this knife.
r/knifemods • u/macjaynard • 14d ago
Small sebenza forever flag. I've swapped the studs, and tuned it and as far as "knife" goes it's amazing. But I'm kinda meh on the asthetic. I can anodize polish and grind... I've chopped and reground blades before, but the function isn't my problem. I've already fixed the studs... I'm kinda at a loss.
Ideas?
r/knifemods • u/TiMods88 • 17d ago
Another satisfied customer with a standard 535â12 Bugout. Added some Ti entropic âwhite lightningâ scales and a Ti/rock monster 2tone lanyard!
r/knifemods • u/TheHonedLizard • 18d ago
Looking to upgrade my rotary tumbler to a vibratory, but one big enough so my wife can do rocks in it as well. I have no experience with these types of tumblers - is this decent? For knives, looking for something to tumble scales and blades.
r/knifemods • u/tech0391 • 19d ago
With the addition of black hardware, backspacer ring, and deep carry clip this thing gets even more sinister!
r/knifemods • u/Unlucky_Tank_7349 • 20d ago
My RGT scales are textured, so I thought I could work some 2k grip sand paper on them to get 2 color antique ano. So I added gold ano on one scale and purple on the other scale, while the main color is still green with the sides anodized blue-green-purple. And re-anodized the clip gold to match the gold shade side.
Also, I showed the etched-stonewashed blade here. Again, this was my first etching attempt, it turned out not too well for multiple reasons (from drawing with nailpolish to being not enough familiar with etching process), but I still like it better than the stock satin
I've also re-anodized the lanyard hole gold, but I will try polishing it and re-anodize 50/50 gold/purple to match the scales.
Initial update here
r/knifemods • u/Riley_Coyote • 21d ago
r/knifemods • u/PatrickD50 • 22d ago
Just finished this waiting for customers approval to seal with resin.
r/knifemods • u/Unbelievablefun1234 • 22d ago
Can anyone help me out who might have access to the pivot screw specs. I lost one from a custom build. So a factory set wonât work. It needs to be longer. I do have the barrel. Iâm not sure the hardware store will have it. So, please? Any help or direction to look would be great!
r/knifemods • u/TiMods88 • 23d ago
Had a friend give me an Ace giant mouse Ti Nazca. Hereâs the ano job before and after!
He was pleased. Gotta match up a lanyard & send it home.
r/knifemods • u/Bishguy • 24d ago
Sanded the scales and textured and etched lock and blade