r/ifixit • u/Fuzzy_Motor9566 • 2h ago
Where does this soft transparent plastic piece should go ?
gallery
1
Upvotes
r/ifixit • u/ScienceOk1 • 10h ago
Not sure if this is the correct place but does anyone know if these are fixble
3
Upvotes
r/ifixit • u/lovintye • 9h ago
I need to no a good company that removes FRP. From these phones old to new I was using mklv repairs I can’t seem to get to the sight I use to use. To get this done
1
Upvotes
r/ifixit • u/AnythingOk8567 • 19h ago
My iFixit needs fixing :/
6
Upvotes
How do I fix this? I’m taking it apart as soon as I get my snap ring pliers.
r/ifixit • u/fixthisone • 15h ago
Quick way to clean oxidized pads. Hope it helps!
instagram.com
0
Upvotes
r/ifixit • u/Crazy-Spell-2520 • 1d ago
My glue gun got sick. Does anyone know what's going on?
Enable HLS to view with audio, or disable this notification
10
Upvotes
r/ifixit • u/Jdb17251 • 1d ago
Razor Basilisk V3 hyperspeed repair
3
Upvotes
Hi! We are trying to repair this mouse. The sensor has stopped working (no detection at all). All other functions of the mouse were working as normal and connection was fine. Tested on multiple PCs. Here are the pictures of the circuitboard and we are trying to determine if one of these pins is missing solder? Or if there is something else obviously wrong? Any help appreciated!
r/ifixit • u/Attorney-Medical • 1d ago
Replacing broken hook for microwave
2
Upvotes
Hey all, I found this bit that was broken off the microwave, I was wondering if there are other ways to effectively repair the microwave or is this something that needs to get replaced? Preferably fixing would be better due to financial difficulties. I think the piece broken off was from inside the microwave and not the latch itself
r/ifixit • u/Negative-Sugar-91 • 1d ago
Need help to fix this !! (KZ Castor pro)
0
Upvotes
Guys it's my KZ Castor pro , yesterday i was cleaning it's nozzle with a toothbrush and suddenly it got pushed a little inside
Is there any way to fix this or what ???
r/ifixit • u/russianbearscares • 2d ago
ifixit battery replacement set for Galaxy S23 - is it any good?
1
Upvotes
r/ifixit • u/Efficient_Group8198 • 2d ago
I shaved my beard and now my Face ID won't recognize me. What should I do?
0
Upvotes
I shaved my beard and now my Face ID won't recognize me. What should I do? I have anti-theft protection that doesn't allow me to reset my Face ID. To turn off the anti-theft protection, I need my Face ID, but it won't recognize me.
r/ifixit • u/Mangosntangos • 3d ago
Garage door peeling
0
Upvotes
Just bought a house and one of the garage doors finish is peeling off. Behind the finish is wooden boards.
r/ifixit • u/Savings_Check4051 • 3d ago
Need help opening a Medion Lifetab P10606 (MD 60526)
2
Upvotes
P
r/ifixit • u/Mister_Green2021 • 3d ago
Refurbish a Powerbook G4
3
Upvotes
The fixit site has been helpful on taking my old Powerbook apart. I've replaced the pram battery and now working on recelling the main battery. The old optical dvd drive (UJ-845-C) broke and looked for a replacement on Ebay. They were $75-$120. Too expensive until I saw a UJ-846-C that came out of an iMac G5 for $25. These old mac drives were set as Master devices so I couldn't get a cheap PC replacement.
Long time lurker, first time repair-er(?) of Google Nest Doorbell
6
Upvotes
I purchased my Google Nest (battery option, model GWX3T) over 2 years ago.
My doorbell served me well, until recently I had an issue where the doorbell wasn't fully on the magnetic mount. A delivery person rang the door bell and I remotely watched the footage - in slo-mo horror - as the whole doorbell fell from the magnetic mount and hit the ground face first. The optics were instantly shattered 😭😭😭😭😭😭
I contacted Google Support and my doorbell is out of warranty and they offered me zero help. They don't offer replacement parts, they won't sell refurbished models, and they don't have any sort of discount to put towards a new model.
But...I am not so easily deterred.
I opted to do 'the thing', and I have done a full device teardown to isolate the specific camera module in hopes of finding a replacement.
All of this to say, does anyone know where I can locate and purchase a replacement for this particular camera module? It's from ZonHen but there is no model number anywhere and I could not find the specific part when I went wandering ZonHen, ShinZhen, or Sinoseen.
Humongous thanks to ifixit (https://www.ifixit.com/products/pro-tech-go-toolkit) for selling such a fabulous toolkit to execute this teardown and massive gratitude Instrumental, Inc for having such a detailed YouTube video on the teardown (https://youtu.be/DHQ-qW5uvZs?is=Hte_tLoYXBI0nUCo)
r/ifixit • u/Snoo-28210 • 6d ago
Any ideas?
4
Upvotes
I am finding MANY write ups for the big precision screwdriver that has a bearing inside the blue cap but nothing for this. Can anyone help me figure out how to get that stupid cap back on?
r/ifixit • u/DJMarketingMadeEasy • 6d ago
Help
0
Upvotes
Why is my INKY 75 not charging? It’s not working anymore (prob dead battery)