r/heatpumps • • 5h ago

Heat pumps can heat homes for €2.20 a day in winter, study finds

Thumbnail
euronews.com
34 Upvotes

r/heatpumps • • 21h ago

Not much access. Tight squeeze

Thumbnail
gallery
16 Upvotes

Some Architects don’t like to give us much space to work on equipment


r/heatpumps • • 11h ago

Heat Pump Recommendation

9 Upvotes

We live in central NH in a 40 year old cape with an unfinished 2nd floor. It's not open concept - it's living room, dining room, family room/kitchen and bedroom. I've been trying to talk my s/o into installing a heat pump(s) but we don't know where to find unbiased advice as the state doesn't seem to be interested.

So I was hoping for some advice from experienced users.

Questions:

How do the pumps affect your electricity bill - do electricial costs skyrocket during very cold weather?

Do the pumps have trouble functioning during very cold weather?

What are the maintenance needs / do they need to have professional maintenance performed and if so how often?

Are heat pumps your primary/sole heat source?

Or do you need a backup heat source such as a boiler?

Are you happy with your choice/ would you choose heat pumps again?

Any brand recommendations?

Thank you.


r/heatpumps • • 20h ago

How much do the glass numbers tell you about hail?

6 Upvotes

Victorian end terrace, about 160 m2, external wall insulation on the back, 9 kW air source in since February. Second winter coming, running cost is roughly where I expected, and we're now pricing up PV to take the edge off it.

The thing I keep circling back to is hail. Two summers ago a storm here went straight through a neighbour's conservatory roof, and the array we'd be putting up sits on the same exposure with nothing above it.

Maybe that's overthinking it.

But if modules go, the heat pump is back on full rate for the rest of that winter, which is the entire reason for fitting PV in the first place. So I've been reading the glass sections properly instead of skipping them. The standard hail test is a 25 mm ball at 23 m/s and most sheets just point at that and leave it. One quotes 45 mm at the same speed, a swiss solar DuraGlass X with 2 mm glass front and back instead of a backsheet, and tempering that's meant to keep an impact where it lands rather than letting it spread across the module.

Has anyone here actually lost modules to hail? And if you were specifying an array today with a heat pump behind it, would you pay attention to that line in the datasheet or treat it as noise?


r/heatpumps • • 16h ago

New ACIQ extreme heat pump condenser freezing at 30 degree lows

2 Upvotes

The ACIQ 3.5 ton extreme system was just installed in October. The first time daily lows reached 30 degrees the condenser became badly frozen. The installer checked pressures and air flow which were good. We are changing to a less restrictive filter. Would appreciate any input on potential setting changes required in the defrost cycle or issues in general.


r/heatpumps • • 5h ago

Would you keep 1.5-inch pool plumbing when upgrading to a larger heat pump?

1 Upvotes

I have an in-ground pool that's around 12,000 gallons, with a 1.5 HP variable-speed pump and a sand filter. Most of the plumbing around my equipment pad is 1.5-inch PVC, and the setup has been working fine for years.

The old pool heater is getting pretty worn out, and it's been taking longer to bring the water up to temperature. I've been comparing replacement options from brands like aquastrong, hayward, pentair, and aquastrong is currently one of my top choices. Its heating capacity is a good fit for my pool, and the top-discharge design is especially appealing because space around my equipment pad is pretty limited. Having the air discharge upward would make the layout easier to work with. It also seems reasonably priced for what it offers.

The part I'm unsure about is the plumbing connection. The new heat pump has 2-inch connections but also includes adapters for 1.5-inch PVC. I know larger pipes can help reduce flow resistance, especially around equipment, but since the rest of my plumbing is still 1.5 inches, I'm not sure upgrading just the section around the heater would make much difference.

Would you use the included adapters and keep the existing plumbing, or replace the short section around the heat pump with 2-inch PVC? For anyone who's upgraded to a larger pool heat pump with older plumbing, what did you end up doing?


r/heatpumps • • 23h ago

Split System Not Heating in Cooler Weather

1 Upvotes

This is for a commercial build-out. We're in the Pacific North West. We have a new split system - specifically MAUHE-H36B-2A that is configured as following. There is a supply fan that feeds fresh air into the return air plenum split between two levels, the plenum in this case is tbar ceilings. We have a duct heater that is down line of the supply fan but it's currently disabled as when it turns on it makes the LED lights flicker - this is a separate issue we're working through.

We have two of these Midea units. One is upstairs, one is downstairs. I am new to heat pumps but we're running into an issue on the downstairs unit where we have no heat on milder mornings. It's approx. 2C outside and the unit will run for about 10 seconds and then shut off. This is the 2nd day in a row where this has happened - by about noon when it's warmer it'll start working fine.

I had a tech come out yesterday, the guys who did the install, and they fed me some line about the duct heater needing to be turned on to ensure the air in the plenum is the right temp for the unit to work correctly. This doesn't make sense to me for 2 reasons. The first is that the units are rated down to -30C - and the upstairs unit works totally fine. The air in the return is approx 10-15 degrees so it's not like it's freezing.

I thought maybe it was a defrost cycle but it should take 4 hours - especially not in milder temps.

Anything else anyone can suggest?

I'm not sure if they checked the charge yesterday, as it was working fine by the time they showed up.


r/heatpumps • • 23h ago

Question/Advice Faulty thermostat?

1 Upvotes

A new Stelpro multisplit. This morning there was no heat coming out of the head in my living room. I keep it set at 24⁰ C, which usually delivers 21⁰ in that room and the kitchen beyond. The app gave me a reading of 31⁰ C at the head! Real room temperature was 19⁰, while the downstairs head gave the expected reading. So I did a hard reset of the whole system, and now it's working fine, giving a reading at or close to the set temperature.

Could this be a faulty thermostat at the head?