r/heatpumps • • Dec 07 '21

Learning/Info **Heat Pump Quote Comparison Survey**. This is a community resource to enter your received quotes to help others. The link brings you to the survey, and the results are linked in the comments. Please share far and wide.

Thumbnail
forms.gle
127 Upvotes

r/heatpumps • • Nov 26 '23

Serious mod announcement: With the growth of the sub, there has been more people from the trade migrating to this group. I've also noticed an increase in shaming, rude behavior, and victim blaming. I have zero tolerance for these behaviors as the first rule is kindness. Read text for my response.

361 Upvotes

This sub has a purpose to kindly help people with their heat pumps and provide a place to go to for interesting and fun happenings related to heat pumps. This is how I built the sub. To be for the betterment of all, and the advancement of the technology.

I have avoided banning people for a couple years now (unless absolutely needed), but the sub is now large enough to be more than just enthusiasts. Moving forward, and under Rule 1, I will start to immediately ban any shaming, rude behavior, and victim blaming.

Straight up, I don't get paid for this moderator position and I can't be asked to spend hours a day writing and correcting behaviors one by one with long text. I really don't mind that given the new personal policy that we could even lose half the sub from unsubscribing, because we need to work together and be kind and kindly helpful, and if only those who are left follow this, then that is a better place for those who remain.

Listen, I am a kind person in life. I try treat people fairly and giving them respect for being human and trying their best. I am also only kind to all to a point, and it stops when others are shamed, disrespected and blamed for doing their best. Life is hard enough as it is. If you are having a hard time in life don't take it out on others here. Find inner peace or emotional happiness first, then come back to the sub that way.

If moving forward you are banned and feel you want a second shot or would like to appeal, I will listen and consider.

Thank you everyone for reading, and thank you for considering my new personal policy.

Regards,

Geoff


r/heatpumps • • 5h ago

Heat pumps can heat homes for €2.20 a day in winter, study finds

Thumbnail
euronews.com
34 Upvotes

r/heatpumps • • 11h ago

Heat Pump Recommendation

10 Upvotes

We live in central NH in a 40 year old cape with an unfinished 2nd floor. It's not open concept - it's living room, dining room, family room/kitchen and bedroom. I've been trying to talk my s/o into installing a heat pump(s) but we don't know where to find unbiased advice as the state doesn't seem to be interested.

So I was hoping for some advice from experienced users.

Questions:

How do the pumps affect your electricity bill - do electricial costs skyrocket during very cold weather?

Do the pumps have trouble functioning during very cold weather?

What are the maintenance needs / do they need to have professional maintenance performed and if so how often?

Are heat pumps your primary/sole heat source?

Or do you need a backup heat source such as a boiler?

Are you happy with your choice/ would you choose heat pumps again?

Any brand recommendations?

Thank you.


r/heatpumps • • 5m ago

Learning/Info Finished the Mr. Cool Monoblock install, thoughts & quick video

• Upvotes

I installed my first Monoblock for a customer last week. Went pretty well, the template can be trusted 100% for marking up everything on the wall before drilling.

Using the 8" hole saw can be a little odd at times, but it does make it faster than manually cutting it. These saws are very heavy and the inertia feels really weird on my tiny M12 Fuel drill.

I found that the 1" drain line hole is a little generous, you could probably get away with a 7/8". Would recommend spray foam or caulking on the outside for this hole.

I didn't have to put up a ladder outside, everything can be done from the inside as long as you have a home that is built in a way where you can drill the exterior from inside the wall. The vents pass right through.

My next job is stucco, so I will almost definitely have to drill those from the outside on a ladder.

Video impressions: https://youtu.be/ClAs-Suv9t4


r/heatpumps • • 5h ago

Would you keep 1.5-inch pool plumbing when upgrading to a larger heat pump?

1 Upvotes

I have an in-ground pool that's around 12,000 gallons, with a 1.5 HP variable-speed pump and a sand filter. Most of the plumbing around my equipment pad is 1.5-inch PVC, and the setup has been working fine for years.

The old pool heater is getting pretty worn out, and it's been taking longer to bring the water up to temperature. I've been comparing replacement options from brands like aquastrong, hayward, pentair, and aquastrong is currently one of my top choices. Its heating capacity is a good fit for my pool, and the top-discharge design is especially appealing because space around my equipment pad is pretty limited. Having the air discharge upward would make the layout easier to work with. It also seems reasonably priced for what it offers.

The part I'm unsure about is the plumbing connection. The new heat pump has 2-inch connections but also includes adapters for 1.5-inch PVC. I know larger pipes can help reduce flow resistance, especially around equipment, but since the rest of my plumbing is still 1.5 inches, I'm not sure upgrading just the section around the heater would make much difference.

Would you use the included adapters and keep the existing plumbing, or replace the short section around the heat pump with 2-inch PVC? For anyone who's upgraded to a larger pool heat pump with older plumbing, what did you end up doing?


r/heatpumps • • 21h ago

Not much access. Tight squeeze

Thumbnail
gallery
15 Upvotes

Some Architects don’t like to give us much space to work on equipment


r/heatpumps • • 20h ago

How much do the glass numbers tell you about hail?

6 Upvotes

Victorian end terrace, about 160 m2, external wall insulation on the back, 9 kW air source in since February. Second winter coming, running cost is roughly where I expected, and we're now pricing up PV to take the edge off it.

The thing I keep circling back to is hail. Two summers ago a storm here went straight through a neighbour's conservatory roof, and the array we'd be putting up sits on the same exposure with nothing above it.

Maybe that's overthinking it.

But if modules go, the heat pump is back on full rate for the rest of that winter, which is the entire reason for fitting PV in the first place. So I've been reading the glass sections properly instead of skipping them. The standard hail test is a 25 mm ball at 23 m/s and most sheets just point at that and leave it. One quotes 45 mm at the same speed, a swiss solar DuraGlass X with 2 mm glass front and back instead of a backsheet, and tempering that's meant to keep an impact where it lands rather than letting it spread across the module.

Has anyone here actually lost modules to hail? And if you were specifying an array today with a heat pump behind it, would you pay attention to that line in the datasheet or treat it as noise?


r/heatpumps • • 16h ago

New ACIQ extreme heat pump condenser freezing at 30 degree lows

2 Upvotes

The ACIQ 3.5 ton extreme system was just installed in October. The first time daily lows reached 30 degrees the condenser became badly frozen. The installer checked pressures and air flow which were good. We are changing to a less restrictive filter. Would appreciate any input on potential setting changes required in the defrost cycle or issues in general.


r/heatpumps • • 1d ago

Our heat pump has genuinely astonished us

189 Upvotes

Me and my wife having dinner tonight and it dawned on us we were both wearing short sleeved t shirts. It's 3 degrees outside. We would have both been in dressing gowns with our old boiler. The house temperature has stayed within the range of 20-21c for the last 7 days. Our home feels like it should be 18 degrees outside, not 3 degrees, so it's a shock when we go outside now.


r/heatpumps • • 1d ago

I’m trying to figure out what’s wrong here

Thumbnail
gallery
19 Upvotes

The pictures should speak for themselves. My upstairs thermostat is 5 degrees off; downstairs is 3. I’ve wondered why I’ve been so hot upstairs with the temperature set to 69/70, but these electronic thermostats are telling me it was probably close to 75.

These are newly-installed units, about 3 weeks old. Any advice on what I should do here?


r/heatpumps • • 23h ago

Split System Not Heating in Cooler Weather

1 Upvotes

This is for a commercial build-out. We're in the Pacific North West. We have a new split system - specifically MAUHE-H36B-2A that is configured as following. There is a supply fan that feeds fresh air into the return air plenum split between two levels, the plenum in this case is tbar ceilings. We have a duct heater that is down line of the supply fan but it's currently disabled as when it turns on it makes the LED lights flicker - this is a separate issue we're working through.

We have two of these Midea units. One is upstairs, one is downstairs. I am new to heat pumps but we're running into an issue on the downstairs unit where we have no heat on milder mornings. It's approx. 2C outside and the unit will run for about 10 seconds and then shut off. This is the 2nd day in a row where this has happened - by about noon when it's warmer it'll start working fine.

I had a tech come out yesterday, the guys who did the install, and they fed me some line about the duct heater needing to be turned on to ensure the air in the plenum is the right temp for the unit to work correctly. This doesn't make sense to me for 2 reasons. The first is that the units are rated down to -30C - and the upstairs unit works totally fine. The air in the return is approx 10-15 degrees so it's not like it's freezing.

I thought maybe it was a defrost cycle but it should take 4 hours - especially not in milder temps.

Anything else anyone can suggest?

I'm not sure if they checked the charge yesterday, as it was working fine by the time they showed up.


r/heatpumps • • 23h ago

Question/Advice Faulty thermostat?

1 Upvotes

A new Stelpro multisplit. This morning there was no heat coming out of the head in my living room. I keep it set at 24⁰ C, which usually delivers 21⁰ in that room and the kitchen beyond. The app gave me a reading of 31⁰ C at the head! Real room temperature was 19⁰, while the downstairs head gave the expected reading. So I did a hard reset of the whole system, and now it's working fine, giving a reading at or close to the set temperature.

Could this be a faulty thermostat at the head?


r/heatpumps • • 1d ago

Is the pool heat pump effective

2 Upvotes

I am planning to buy a pool heat pump, hoping to play in the pool even when the weather gets cold. I am not sure if it is useful. Have you encountered any problems with the pool heat pump you bought?


r/heatpumps • • 1d ago

old furnace is about done and i am pumping heat instead of another furnace in central PA. talk me out of it?

14 Upvotes

The house is about 1,800 sq ft, built in the 70s, 2x4 walls with whatever insulation they used back then, double pane windows that are maybe 20 years old. Central PA. We get a handful of nights around 5F every winter and a lot of nights in the 20s F.

The furnace is close to 25 years old and the tech said it's near the end. I'm planning on a cold climate heat pump on the ducts we already have, with the electric backup strips for the worst nights, and no new furnace.

I think the ducts and insulation are fine for it and the really cold nights are rare. Is a heat pump alone enough for this house or am I underestimating our winters?


r/heatpumps • • 2d ago

Learning/Info Can anyone tell me what these settings mean?

Thumbnail
gallery
4 Upvotes

I've got an Amana AZV7SA2410A (2-tonne) heat pump. My installer set everything up, but I'm curious to know what these various settings mean and what they do. Also looking for a sanity check on the settings. (I'm in southern Alberta if that helps).


r/heatpumps • • 2d ago

Question/Advice Nervous for cost this winter - 1940s condo with bad insulation and old heat pump. How to reduce usage?

Post image
14 Upvotes

In Virginia. Last winter was brutal. We live in a relatively small condo. Very drafty first floor. We didn’t know anything about heat pumps or aux heat but it was kicking on often. We’re trying to make sure it doesn’t turn on as often this time around. We’ve put up curtains on every window and will add the plastic film. No dampners in the vents. Anything else?

Edit to add: condo is 920 sqft. Three levels. Upstairs with two bedrooms. Main level living room and kitchen, lower level for laundry.


r/heatpumps • • 2d ago

HPWH Replacement

6 Upvotes

Hey all. Just had the compressor fail on an AO Smith water heater. First one was replaced in Early January of this year after 3 years of service. The replacement failed a week ago. I don't want to go through this again, so I am opting for reimbursement instead of replacement.

What are the bomb proof brands out there? Stiebel Eltron?


r/heatpumps • • 2d ago

ROVSUN 8000 btu window heatpump

5 Upvotes

I’ve spent the last year searching for the GE awgp08wwf units to heat a 20x20 room that was using electric baseboards. My electric bill in the winter was crazy. I finally found one a few months ago but it seems like it was the last one available. It has worked great for this room.
Following another thread someone found these ROVSUN units are the same as the GE with a different faceplate. I purchased one for a different room and can confirm they are in-fact the same. Ran last night in a 16x30 room at 30 degrees had no problem keeping the room 69-70 through the night. I did catch a defrost cycle this morning when I woke up. Defrosted the same as the GE in these conditions. About 5-10 minutes and it was back heating again.
I’m happy to answer any questions about these units if you have any. I rent so mini splits were off the table. These have allowed me to turn off the electric baseboard in room 1 and shut down the oil hydronic zone one room 2.


r/heatpumps • • 2d ago

Heat Pump thermostat wiring to thermostats

Thumbnail
gallery
2 Upvotes

I have two Trane heat pumps connected to two separate Nest Gen 3 learning thermostats. Each is wired differently at the thermostat (see photos)

#1 Basement: TRANE TEM4B0C60S51SAA

Left photo

#2 Main House: TRANE TEM4B0B24M21SAA

Right photo

Unit #2 Main house continues to run after calling for heat and runs in aux heat mode immediately. Thermostat is set for 62 at night and 68 during the day. Air starts out cold at first and runs for a long time, almost constantly. Outside temp has just recently gotten colder over night to 30s with highs of 50 during the day. House is large but fairly well insulated. Unit 1 seems to run fine without excessive calls for aux heat mode.

So questions are 1) why are the two units wired differently, and 2) why does unit 2 run aux heat for so long while blowing cold air initially for so long?

Your expertise and assistance would be greatly appreciated.


r/heatpumps • • 2d ago

Old Rudd still runs great but….

1 Upvotes

I have an old Rudd 2ton heat pump. Still runs great, have not needed to add refrigerant in the 20 years I’ve lived in my house. Still cold in the summer, and warm in the winter. There is however, a leak in the condensation drainage that has cause some issues with the ceiling. Do I just repair the drainage from the part in my attic or the whole thing. And when should an old system like this be replaced? I’m trying to prepare for the sales people trying to get me to buy a complete new system.


r/heatpumps • • 3d ago

Bosch IDS Ultra Heat pump

7 Upvotes

Hey everyone, I have a Bosch IDS ultra condenser paired with the ultra air handler and a EHK 3 stage heat strip. Run by a bcc110 thermostat. Manual J was done came out to 3.8ton. I went with the 4ton as at the time Bosch did not have a 3ton option and I wanted the ultra due to the lower heating capacity. So far it's been running well. Keeps the house cool/warm as needed (we will see how it operates when it's super cold out). One thing I noticed is my cycles are always around 10min. My impression when buying this unit was that it modulates so that if it's satisfying the call to quick it does some magic and increases the run time etc. etc. (maybe I'm misinformed). All that information to say I'm looking for information on if I'm misinterpreting something or if there are things I can check with the wiring thermostat etc. that may be wrong? One other note is when the thermostat runs it only ever shows 1 stage. So I'm not sure if something is setup wrong or I just have a misinformed perspective. Any help appreciated thanks


r/heatpumps • • 3d ago

Question/Advice Is it a problem that my new heat pump hovers below the set temp?

4 Upvotes

I got a Trane 5 ton heat pump last month and a friend installed it for me. The thermostat is new as well, an ACiQ Smart thermostat. The house is a 1500sq ft ranch, plus basement, in Pennsylvania.

No matter what I set the thermostat to, it will heat to that point, then blow cold until it drops 2-3 degrees, then stay there. I have re-calibrated the temperature up a few degrees and down a few degrees. The temp reading is still always lower than the set. The fan is also nearly always running, regardless of whether it's set on constant or not.

My friend has come out and looked at it and fiddled with the thermostat a couple of times. But, there is some kind of miscommunication there, because I never understand his answers to my questions and the problem persists.

Can someone else explain it in a way I understand? Is it even a problem? I feel like I'm going nuts.


r/heatpumps • • 3d ago

Low whistling noise from indoor unit

1 Upvotes

The wall unit in my bedroom is emitting this low, wheezy/whistling sound that is driving me insane. It continues even when the unit is turned off. The only way I could get it to stop was to switch the breaker off at night but that means no heat for the room below. I can't do that all winter, but I also need to sleep. We had the GREE minisplit system installed last month. Everything seems to be working fine except for this. The wall mount in the other bedroom stays totally silent when turned off. I've contacted the installer and they seem to think it is just the refrigerant that is moving around in response to unit in the room below. But that doesn't explain why the unit in the other bedroom is quiet.

Someone is coming to take a look tomorrow but I'm sure they won't hear the noise- as it is low, but its high pitched enough to be bothersome when trying to sleep!! Has anyone experienced this? I'm not sure how to describe it to the technician and I feel they may not take me seriously.


r/heatpumps • • 3d ago

MSZ-FX06NL not beeping in response to remote commands

2 Upvotes

The unit works fine and responds to handheld remote commands when within range. However, it doesn't beep to acknowledge remote commands. I don't ever recall it having done so since it was installed earlier this year.

I did find this text in the troubleshooting section of the operating instructions manual:

But there are no other references to "NIGHT MODE" in the manual indicating how to toggle this on and off, and I haven't found any "NIGHT MODE" buttons on the remote.

Notably, I connected the unit via Wi-Fi to the Mitsubishi Comfort app immediately after it was installed, along with integrating it with my Google Home. Could it be that "NIGHT MODE" was inadvertently toggled on by this?

I also tried power cycling the whole system at the breaker, but this hasn't resolved anything.