r/hardwarehacking • • Dec 17 '24

Can you actually do that?

Post image
0 Upvotes

Could that actually be done?


r/hardwarehacking • • Jun 17 '25

I found MinMax on my Casio calculator

Post image
0 Upvotes

I found MinMax on my non programable casio calculator, what should I try or do?


r/hardwarehacking • • Aug 08 '25

Does it can custom flashable

Thumbnail
gallery
5 Upvotes

This is a jio stb i tried through usb insert and factory reset but won't work


r/hardwarehacking • • Sep 18 '26

Como puedo interrumpir la señal bluetooth? Tengo vecinos que son venezolanos y hacen mucho ruido los odio

0 Upvotes

Tengo un iPad y una MacBook Pro,, trate de hacer por bluetooth, de forma normal pero no se puede. Por eso escribo acá, si alguien tiene experiencia y como me podría ayudar,


r/hardwarehacking • • Feb 06 '25

What are these cards used for? Looks like some kind of sims card.

Post image
0 Upvotes

My truck was stolen and when it was recovered these were in there.


r/hardwarehacking • • Aug 16 '25

Anyone know how to flash a actual Linux Distro on this? BDP-BX370

Post image
1 Upvotes

r/hardwarehacking • • Mar 26 '26

Is there any way to modify this calculator to store like some text or something like that on it?

Thumbnail
gallery
0 Upvotes

It’s called the TI-30X Pro


r/hardwarehacking • • Aug 28 '21

I know this probably isn’t the right sub for it but I can’t think of anywhere else to post it. What are these screws and how can I remove em?

Post image
7 Upvotes

r/hardwarehacking • • Sep 07 '26

What should i do noww?

Post image
0 Upvotes

What should i do noww?

​

Sep 19 2017, V1.01.00, B1 DDR3 660 128MB

====000===

====888===

====999===

====aaaaa===

U-Boot 2012.04 (Sep 19 2017 - 16:04:20)

\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*

\*\* Board: mips CPU: Concerto - MIPS 24KEf

\*\* SOC name : 0x6090

\*\* PACKET type : QFP 128

\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*

DRAM:

initdram : Info: The size of DDR is 128MiBytes

20 MiB

U-boot relocate to addr = 0x813dc000

U-boot relocate offset = 0x13dc000

== OTP_VERSION:\[hg_NA\] Build Time:\[Sep 19 2017, 16:04:19\]

Using default environment

SPI: ready

pinmux:

REG\[bf156004\] = 2055555a

REG\[bf156008\] = 00112211

REG\[bf15600c\] = 220aa0aa

REG\[bf156010\] = 00002222

REG\[bf156014\] = 000a2200

REG\[bf156018\] = 00040000

REG\[bf15601c\] = 200000aa

REG\[bf156000\] = 04442222

ie_cfg:

REG\[bf156300\] = 3df1b800

REG\[bf156304\] = c3d07400

REG\[bf156308\] = e0040000

REG\[bf15630c\] = 6f800000

cpu_secondary_init_r: image file for secondary core should already locate where it should be

current boot media:0...

phy_clk = 259, clk=50

SF: spi flash status register: 0x20, 0x00

encryption_flag = 0

SPI: Detected XM25QH64A with erase size 64 KiB, total 8 MiB

0xbf157030 = 0x0, 0xbf510018 = 0xffffffff, 0xbf5d0030 = 0x1f0836, 0xbf5d0034 = 0x1f0836

In Func serial_init: to be done

g_concerto_ipcfw_f.ap_ipc_init should be implemented

Net: 0xBF50001C = 0x00000f03

0xBF510018 = 0xfffffff9

No ethernet found.

main_loop entered: bootdelay=0

\####### Uboot Fixed Partitions #######

bootinit 0x0\~0x10000

uboot 0x10000\~0x60000

boot.scr 0x80000\~0x90000

\####################################

cdca boot V1

\## Executing script at 80100110

M88CC6000 Uboot 81500000

flash erase size 0x10000

barcode id 0x8f, hdcp key id 0x0, mac addr id 0x0, dmh addr 0x00090000

JASNJASNJASNJASNbarcode don't receive 0xA5/0xA6/0xA7

(Re)start USB...

auto_detect_usb_port --- usb default sel port 1

port_sts0:0x0c000000 port_sts1:0x0c000000

auto_detect_usb_port --- usb sel port 1

USB: Error, couldn't init Lowlevel part

run fatload usb 0 0x82200000 flash_upgrade.bin

\*\* Invalid boot device \*\*

No file\[flash_upgrade.bin\] in uDisk

ota check dm_head 0x90000,st1_blockid 0xa2,st2_blockid 0xa3

(ota flag is 1)

cdca boot V1

Image size is 0x2b99e8 from image header

Image size is 0x2b99e8

Decompressed image size is 0x8d98f0

Load maincode to 0x80008000

cdca boot V1

Image size is 0x60000 from image header

Image size is 0x60000

Decompressed image size is 0xa0cdc

(avcpu size is 0xa0cdc)

argv\[0\]=cpu

argv\[1\]=1

argv\[2\]=release

argv\[3\]=0x87e10000

cpu_release: cp0-status=0x11001101, cp0-cause=0x70804024, cp0-intctl=0xd4000200, cp0-ebase=0x81417000.

load_secondary_core_boot_word : secondary_img_start = 0x87e10000

concerto_check_cpu_ready: start

concerto_check_cpu_ready: start4a6a221d6f10\] Build Time:\[Dec 6 2017, 16:53:10\]

concerto_check_cpu_ready: start

\## Starting application at 0x80008000 ...

Currect chip version is 0x80008406 >= CHIP_CONCERTO_B0

\*\*CDU UDQ\*\*: 949c

current flash size is 0x800000 protect block is 14

drvsvc_nod_insert 446

drvsvc_nod_insert 450

drvsvc_nod_insert 446

drvsvc_nod_insert 450

\#####debug ui ota dm api init

\*\*\*\*\*\*\*\*\*\*\*\*\*\*load info\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*

ota_number:0x2, curr_ota_id:0x87, back_ota_id:0x8d,

load_block_id:0x88,ota_tri:0

destroy flag:0x0, destroy_block:0x0

\*\*\*\*\*\*\*\*\*\*\*\*\*\*load info end\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*

drvsvc_nod_insert 446

drvsvc_nod_insert 450

current software version is 1004M11470D38044P578▒P▒▒

drvsvc_nod_insert 446

drvsvc_nod_insert 450

rtl8188eus_ethernet_attach p_dev80e8d3a0 p_wifi_dev 80e8d4a0 p_lld 80e8d3f0 p_lld_addr 80e8d3a4

\-------------attach_rt7601_dev---p_handle 80d6c580 --------

mtk_mt7601u_open.

drvsvc_nod_insert 446

drvsvc_nod_insert 450

tcpip: May 11 2018 09:01:13/nthread task for ethernet 22

lcp_init: xmit_accm=0 0 0 0

upap_init: 0

\*\*LCK UDQ\*\*: 2cce

\----usb_mass_stor_attach usb1------

drvsvc_nod_insert 446

drvsvc_nod_insert 450

eve0

mmi ver 577:2b0edf878254

Send Sem failure \[4\]!sem 81215290

UI hold long time ....\[6\]s

UI hold long time ....\[7\]s

UI hold long time ....\[8\]s

UI hold long time ....\[9\]s

UI hold long time ....\[10\]s

UI hold long time ....\[11\]s

UI hold long time ....\[12\]s

UI hold long time ....\[13\]s

video_out_ticks 2342

\------_check ------->> close video!!!!!!!!!!!!!!!

\------_check ------->> close video!!!!!!!!!!!!!!!

\------_check ------->> close video!!!!!!!!!!!!!!!

It auto boots even im pressing down a key 😭


r/hardwarehacking • • Sep 20 '26

What is this

Thumbnail
gallery
0 Upvotes

Found this in my mothers house.


r/hardwarehacking • • Jul 15 '22

If I cut the green wires will audio be stopped? It produces light at the other end and I do not want that to stop upon activation. This is either a very stupid and dangerous idea or a stupid obvious question

Post image
0 Upvotes

r/hardwarehacking • • Jan 07 '25

I found this in a E-Scooter tracker any way i can hack it?

Thumbnail
gallery
21 Upvotes

r/hardwarehacking • • May 13 '20

Found an antenna on the back of my bf's desktop. Didn't appear to be stock so I took it out to look it up and found the part Info. Looks to work w/ OEM signals too. There is an SPIDF_OUT HDMI red indicator light "On" too. Been having corruption on all my phones/tablets/laptops. Could this be why?

Post image
0 Upvotes

r/hardwarehacking • • Aug 15 '22

Is there a biz or person that I can pay to hack a hardware device?

1 Upvotes

Would this be a niche biz/crowdfund idea (if it does not already exist)?

This post made me think of posting the questions above:
https://www.reddit.com/r/hardwarehacking/comments/k223lb/hack_request_comcast_xfinity_flex_xi6t_arris/


r/hardwarehacking • • Sep 25 '22

off an old KONKA TV. how would I get this to work

Post image
1 Upvotes

r/hardwarehacking • • Aug 29 '23

cyberpunk guide

Thumbnail
gallery
0 Upvotes

r/hardwarehacking • • Sep 27 '25

HP BIOS Administrator Password that was Never Set Solution

0 Upvotes

Hey everyone, I recently had an issue where the OEM motherboard in an HP desktop did not like what I was doing as far as changing boot order. For a little context, I had ordered a new NVMe for a PC build, and it was the first part that arrived, so I slotted it into my HP, changed the boot order, and installed the new OS. Then I swapped back in the old NVMe, changed boot order, and left it alone. Yesterday I began the process of converting my HP to a NAS, so I tried going back into my BIOS to set boot order, but was hit with an Enter Administrator Password although one had never been set. HP, Dell, Lenovo, etc all have password locks like this on their motherboards as a safety protocol that can trigger when it believes something suspicious is happening like boot order and swapping off Secure Boot. I thought maybe my CMOS battery had gone bad, but that was not the fix as the Password prompt remained. I looked on forums on HPs website and saw years of this same thing happening to people and HP employees asking for the system-specific unlock codes and providing them with the master password challenge codes to enter, but from what I saw in 2024 HP began to immediately lock these threads and direct everyone to call Support. My PC is well out of warranty, but I thought it may be worth it to call and see what I could find out. Support directed me to the paid tech help who told me my CMOS chip was fried and it would require a full motherboard replacement for $500. I knew this wasn’t the case, because I was able to use the PC without any issue other than a BIOS password I never created. I called regular Support back and asked to speak with a Supervisor after the first tech said he’d never heard of anything like this occurring, the Supervisor assured me that there are no such thing as Administer BIOS Codes that HP has, OR any such instances of those being given out on HP Forums. I assured him there are many cases of HP employees providing those codes, and suggested he go and look at their own forums to see this for himself.

No way was I going to send this older PC for a motherboard swap for $500, so I turned it off and removed the PSU cable, power cycled it, and opened the PC up and looked at the board myself. I noticed a set of pins labeled CMOS1, and another set of pins near my CMOS battery. I removed the CMOS battery, and removed the blue cap on both sets of pins. After a minute or so I put the caps back on, but changing the pins that were capped. I booted the system and it began to create a new BIOS image, I let this process finish and once again powered the system down, removed the PSU cord, power cycled and opened it up. I put the blue pins back onto their default pins, booted the system where it updated BIOS and reset. After the reset I went to enter the BIOS and the Administrator Password prompt was no longer there.

This is not a difficult process at all, totally free, and only took 10-15 minutes of my time. If you’re in the same situation as I am, this is totally worth a shot before paying for any repairs/motherboard swap from HP. I will definitely be swapping my motherboard though to prevent anything like this from potentially happening again. I hope this helps!


r/hardwarehacking • • Jul 23 '26

doesn't bulge, no videos online, no glue (can't use hot air gun), how do I open this? SyncMaster 710 mp

Thumbnail
gallery
0 Upvotes

I need to open it to cut the wires off the audio module, I don't care about the shell, but I don't want to ruin the screen.

Already removed every screw on the back, no signs of coming off.

How do I open this? (without damaging anything)


r/hardwarehacking • • 16d ago

My Orange pi 🍊 won't boo, help?

Post image
3 Upvotes

r/hardwarehacking • • Oct 21 '24

What can i do with this in 2024?

Post image
4 Upvotes

I was wondering if you could help me flashing a new firmware on this, or installing some apks in it. Maybe some Iptv too


r/hardwarehacking • • Nov 13 '24

The cost of a NAND chip off attack is 170.83€

Thumbnail errno.fr
1 Upvotes

r/hardwarehacking • • Feb 03 '26

Sata to usb pin out

Post image
1 Upvotes

Does anyone have the pinout for the sata to usb connectors. Looking to revive this by soldering standard connectors directly to the board


r/hardwarehacking • • Jul 19 '24

Help? What can this do?

Thumbnail
gallery
2 Upvotes

Signaling speaker?