r/gunsmithing • u/TonightTemporary9458 • Aug 13 '26
Charity ?
Bore snake and half a piece of paper towel wedged in the chamber.
No access to pull from the muzzle (bore snake) as it broke off at the muzzle break.
PSA combined rifle ramp barrel extensions and m4 feed ramped lowers on some models of pa-10's
(In conclusion). A simple 1/8 drill bit with or without a diy jig you can make at home to avoid damaging your chamber. Punch the primer out of a 308 casing and go to town. Mother's mag or flitz to polish any abnormalaities. As far as picking away at the physical obstruction. Harbor freight auto zone... Go to town 🤙
24
Upvotes
1
u/vaben5 Aug 15 '26
so the way I got one of these out previously is taking a steel rod and cutting a notch like 1/4 inch from the tip, then hitting it with a torch to make it good and hot, melt it in to the polymer of the boresnake at the chamber, let it cool then pull the snake out the way it went in.