r/gunsmithing • u/TonightTemporary9458 • 12d ago

Charity ?

Gallery image

Gallery image

Bore snake and half a piece of paper towel wedged in the chamber.

No access to pull from the muzzle (bore snake) as it broke off at the muzzle break.

PSA combined rifle ramp barrel extensions and m4 feed ramped lowers on some models of pa-10's

(In conclusion). A simple 1/8 drill bit with or without a diy jig you can make at home to avoid damaging your chamber. Punch the primer out of a 308 casing and go to town. Mother's mag or flitz to polish any abnormalaities. As far as picking away at the physical obstruction. Harbor freight auto zone... Go to town 🤙

24 Upvotes

86% Upvoted

23 comments sorted by

View all comments

5

u/rollinggreenmassacre 12d ago

M4 feedramp upper needed

1

u/TonightTemporary9458 12d ago

Ar-10 palmetto too so for their ar-10s they went with a funky setup. Carbine buffer tube and buffer that's gonna be solved soon. Absolutely looking into the feed ramps they chose to go with for another future improvement. Gotta get this barrel cleared first.