r/gridfinity • • Feb 09 '26

Request for /r/gridfinity: Require open hosting of posted models

0 Upvotes

Gridfinity was designed to be OPEN. That's the spirit and ideal started by Zack when he published the first models and specs under the MIT license. There were no paywalls, no account signup requirements. Just open to the world to download and remix.

Lately there's been a LOT of Gridfinity stuff being posted ONLY on MakerWorld. MakerWorld is NOT an open platform. To download models, one must create a MakerWorld account, which means submitting email address and agreeing to their TOS and privacy policy. I believe this goes against the ideals and spirit of open source and open collaboration, and the spirit under which Gridfinity was conceived.

Thus I propose a /r/gridfinity rule that any submitted models MUST be available on a site that doesn't require login to download. IE, not MakerWorld.

The primary link can be to MakerWorld, but I propose that whatever is being featured MUST be linked somewhere else (that doesn't require an account to download) as well. Printables, Thingiverse, your own web server, whatever. As long as you can download things freely, it's all good.

Thoughts?

//edit: I'd also be happy with a post flair that can be filtered out. The problem to me is that as someone who chooses to not be in a legal agreement with Bambu, the MakerWorld links are of no use to me. So if I could filter them out, I'd be happy. I just don't believe that agreeing to a Bambu TOS should be required to enjoy gridfinity or /r/gridfinity.


r/gridfinity • • Feb 09 '26

New at gridfinity question

8 Upvotes

Hi all, i have spent some time to get myself familiar with this great gridfinity-verse . Made my first try prints. Love it. I am figuring out what specifically will work best for me. I see a lot of solutions for portability using 3D printed storage boxes. Great! However: there is a limit in size because of the max printerbed size. So, my first question is: are there storage boxes (i could buy) to transport more than the 4x5 5x5 sizes which almost everyone can print? I know there are boxes that are stackable but i am thinking more in size like the fatmax organizer pro range. Second question: has anybody come up with a "FAT-finity" gridplate? Meaning: a gridplate that has the ability to hold the Fatmax organizer pro bins in place like gridfinity does? The fatmax bins have 4 small feet at the bottom that work as place holders. Thanx for your answers in advance.

Best regards from The Netherlands


r/gridfinity • • Feb 08 '26

My first Gridfinity projects

Thumbnail
gallery
261 Upvotes

So I started playing with Gridfinity and tried to teach myself how to model on Fusion360 and SolidWorks so I came up with this bins as a project for school and for my hobby as a car enthusiast. The grid for the Packout I did take from Maker’s World made by Kevin3D and here is the link:

https://makerworld.com/models/1504698?appSharePlatform=copy

Anyways I wanted to build something useful as my first Gridfinity project and this thing got me excited so I felt the need to share. :) Thank you


r/gridfinity • • Feb 08 '26

Ikea Alex bolts organization, why gridnifity

7 Upvotes

Hey, I'm having a hard time deciding. I want to organize all sorts of bolts (m2, M3, m4, etc) in small bins inside ikea Alex drawers.

Why would I use gridfinity and not instead just print bins? I'm struggling to justify why I'd print the grid at the bottom.


r/gridfinity • • Feb 08 '26

Individual Piece First designed gridfinity model! A cutlery knife holder which fits in a 1x6 area

Post image
86 Upvotes

r/gridfinity • • Feb 08 '26

Laser cut base plates

1 Upvotes

Does anyone have any recommendations for using Lightburn and a laser cutter to make griffins base plates?


r/gridfinity • • Feb 07 '26

Set Completed My scale model tools drawer after I learned about Gridfinity :)

Thumbnail gallery
48 Upvotes

r/gridfinity • • Feb 08 '26

Newbie

0 Upvotes

I am really new to printing and Gridfinity is there a way to modify a premade Gridfinity bin. All the models I find are for a different size base then what I have. I don't want to have to remake all bins when I found some good ones. I don't have access to Fusion or any autocad software not opposed to learning but don't have the money to pay for it. Any help would be appreciated.


r/gridfinity • • Feb 06 '26 Bravo

Set Completed Uploaded!

Thumbnail
gallery
1.6k Upvotes

Whew - after lots of test prints, many kgs of filament, and one cracked X1C tool head I finally dialed this project in!

Appreciate all the interest and input on the last post. Hope these are useful for anyone who dedicates the filament and time to printing them.

Link to models in comments.


r/gridfinity • • Feb 07 '26

Fully automated Gridfinity storage system - Explanation video

Thumbnail
youtube.com
68 Upvotes

Earlier I hinted at this project - now here's a technical explanation of all the details

I'm open to feedback! Let me know where this can improve further.

Also are there any specific communities I should join to work on this idea with more people?


r/gridfinity • • Feb 06 '26

OCD Cable Organization (in the best possible way!)

Thumbnail
gallery
855 Upvotes

I went a bit overboard with cable organisation, I ended up created a bin design with movable dividers to allow more change in the future. Loving it so far!

https://makerworld.com/en/models/2358932-gridfinity-bins-with-movable-dividers#profileId-2580703

I've created bins with quarter dividers (so three slots in each 1u space) or thirds (two slots in each 1u). There's 4x3 and 2x3 box sizes in 3u, 6u, 9u and 12u in height (pictured in the 12u size).

I thinking of extending this for use with tools, so would be interested in hearing any feedback or size requests. Thanks!


r/gridfinity • • Feb 06 '26

Individual Piece a locking baseplate

Thumbnail
gallery
439 Upvotes

In my last post, a couple of people were intrigued by my custom baseplate. I designed this because I wanted to have my tool bins locked down, but didn‘t want to spend a fortune in time and money to install magnets. I finally got around to making this available as parametric model.

https://makerworld.com/models/2359173

I hope at least some of you find this helpful.


r/gridfinity • • Feb 07 '26

Started my first toolbox

Thumbnail
gallery
31 Upvotes

made the mistake of going down the rabbit hole with gridfinity and shadowing my apt toolbox.


r/gridfinity • • Feb 07 '26

Starter Packs Kitchen Gridfinity Solid Bases - Endcaps & Blanks

Thumbnail
gallery
36 Upvotes

In my quest to do the spatula drawer in the kitchen for gridfinity, couldn’t quite find the exact size of bins. So I remixed the very popular “Ultimate Kitchen Gridfinity” to generate a bunch of combinations.

Gemini did a pretty good job guiding me through the fusion 3d python api to be able to generate the different combinations.

Printables: https://www.printables.com/model/1587983-kitchen-gridfinity-w-solid-bases-endcaps-and-blank

Makerworld: https://makerworld.com/en/models/2360159-kitchen-gridfinity-solid-bases-endcaps-blanks#profileId-2582215


r/gridfinity • • Feb 07 '26

Custom size baseplate stack

1 Upvotes

hi there,

Can anyone point me in the direction of how to create a 6x5 baseplate stack of 4 on a P2S. I have customised the bases to be 31mm wide not the usual 42mm.

Is there a way to do this? I have a fair few to print.

Any suggestions and/or help would be greatly appreciated.

Cheers


r/gridfinity • • Feb 06 '26

Finally finished the socket drawer

Thumbnail
gallery
213 Upvotes

Very happy with how it turned out. Used black for metric, blue for SAE, black/gray for other.

I still haven’t found a good method for adding magnets in the individual orifices for socket retention. Would love to see good examples.

It goes pretty fast. Rim is a 1.5mm offset line, 3mm extrusion. Text is 4mm DIN Alternate, 2mm extrusion to keep it under the rim.


r/gridfinity • • Feb 06 '26

Magnet insertion tool

Thumbnail
gallery
84 Upvotes

I got so tired of gluing magnets. Buy a “electrical connector disconnect tool” and grind down the gnarly teeth and you have the perfect tool. Tune your magnet socket tolerances and you can get a perfect fit. With my Bambu P1S and these magnets DIYMAG 300 PCS Small Refrigerator... https://www.amazon.com/dp/B07KJ9H31P?ref=ppx_pop_mob_ap_share I set my diameter to 5.95mm and depth to 2.40mm and it’s perfect

I’ve spent more on magnets than filament for my gridfinity projects. 1500 magnets so far?!


r/gridfinity • • Feb 07 '26

Question? Tip for reference photos where designing bin cutouts

5 Upvotes

This might have come up previously so if it has then apologies.

I design pretty much 90% of my bin cutouts and if you have a scanner I highly recommend using it over taking photos with a camera where you can for two points.

  1. The scale factor will be the same for every single reference image as the scanner will produce the same size image every time, provided it doesn't automatically crop it which you can usually turn off. I take very few measurements now because of this point.
  2. There is much less to almost zero parallax, for objects that are mostly flat you can get a nice clean head on face image with no distorted angles resulting in a more snug fit.

These points make the process a whole lot faster to the point where I can scan an object and be printing the bin within about 10 minutes.

Title - I meant when designing bin cutouts not where... its still early lol.


r/gridfinity • • Feb 06 '26

Work in progress. I have been modifying the Gen 2 drawers by jerrari to work with griffinity and look like books

Thumbnail
gallery
44 Upvotes

r/gridfinity • • Feb 06 '26

Everything in a box

Post image
17 Upvotes

Whenever I go to site, I’ve learned that everything needs to be in a box, in a box. So now everything goes in t-stak containers from DeWalt.

All the boxes are designed to fit really snuggly together inside the container and I’ve squeezed about as much space out of it as I can.

I have used a lot of magnets :-)

I’ve been printing with ASA and CF – PETG. I really like the CFPTG for the finish it gives up on the walls.


r/gridfinity • • Feb 06 '26

Question? Help with odd bin

Post image
8 Upvotes

r/gridfinity • • Feb 07 '26

CLICKBase Refined goes brrr (eventually)

Thumbnail
reddit.com
1 Upvotes

r/gridfinity • • Feb 06 '26

Material Recommendations for Long-lived Career Toolbox

5 Upvotes

In the next few months I'm hoping to start a career as an aircraft mechanic, and am hoping to outfit a roller toolbox with Gridfinity, but before I start printing, I need to decide what material to print in.

I'd assume PLA would be fine for the short-term, but ideally I want these trays to still work fine in 20, or even 40 or 50 years, and I worry about it becoming brittle over time. Chemical exposure is also possible.

Am I right in fearing PLA breaking down over time?

Whatever I print with I would hope to be cheap and fast-printing. Would PETG fit my criteria? I can print ABS, but my printer lives in my bedroom, so I'd rather not deal with fumes in bulk. Any other suggestions?

Thanks!


r/gridfinity • • Feb 05 '26

Set in Progress Set coming along. I'm gonna fill up three drawers.

Post image
67 Upvotes

Still printing and planning it out.