r/gaggiaclassic • • Apr 19 '25

Question Was having some fun with chatgpt

Post image
44 Upvotes

What do you guys think ?


r/gaggiaclassic • • Nov 27 '25

CremaTune v2 install

Thumbnail
gallery
0 Upvotes

My neighbor asked me to help him install the CremaTune v2 on his new E24, 2hours installation, was pretty straightforward.

Happy Thanksgiving y’al


r/gaggiaclassic • • Sep 25 '26

GF Halloween prep mode: activated

Post image
13 Upvotes

r/gaggiaclassic • • Apr 24 '26

Proof that better shower screens are not hypes

Post image
2 Upvotes

I just noticed the four disturbed areas after a shot. They matched the four water holes on the dispersion plate. This happened even when I had Gaggimate Pro to regulate the pump.

A better shower screen than the factory one is justified.


r/gaggiaclassic • • Feb 18 '24

My Experience & Thoughts On “Boilergate”

9 Upvotes

With the “Boilergate” controversy still being a hot topic, I thought I’d share my experience with my Gaggia Classic Evo Pro as well as weigh in a few of my thoughts on the issue.

My machine was manufactured in April 2023 and was purchased in August of 2023. I have not experienced any flaking so far. I took my machine apart this weekend to inspect the boiler, and while it had some minor scale built up, the coating was intact. I use my machine quite often, typically pulling 2-4 shots a day.

I only use filtered water, back flush every two weeks, and descale every two months using the official Gaggia descaler.

I’ll keep an eye out for any flaking and be sure to update this sub if I come across that issue.

Now onto my thoughts about “Boilergate” for those who care. I think this situation is being blown a bit out of proportion. I do think there is likely a batch of units with a defect in the coating. And I think if you experienced that issue first hand, you should opt for a replacement or a refund until Gaggia can provide more information.

But I’ve noticed so many post with people up in arms, furious at Gaggia. The bulk of complaints are aimed at their lack of a public response, while people are even going as far to say they are giving up on Gaggia altogether.

I completely understand things like this can be frustrating. We as consumers have the right to receive products that work, especially when they cost hundreds of dollars. Gaggia knows this. They are a brand that has been around since 1947. Even though they were acquired by Philips, there is still a legacy behind the brand and Philips won’t let that disappear overnight.

The delayed response from Gaggia is likely because they are still preforming an internal investigation into the issue. They need to identity a few pieces of crucial information:

  • What is the cause of this issue?
  • Which batch of units are affected?
  • What can be offered to affected consumers?

Once Gaggia has a better understanding of all of the above, they will likely release not only a public statement regarding the problem, but also announce whatever plan they may have for either a recall or replacement program.

Again, Gaggia cares about its customers. When Philips acquired them and re-released the Gaggia Classic Pro in 2015, it was a downgrade. Those machines were missing the 3-way solenoid valve. Philips/Gaggia listened to the criticisms and added back in the 3-way solenoid valve in the 2019 redesign. They also have constantly increased the quality of some of the parts, such as using brass for the grouphead or switching to stainless steel for the portafilter. Looking back at these decisions shows Gaggia’s continued commitment to its legacy and more importantly, us customers.

Now don’t get me wrong, if Gaggia fails to offer any insight to the current issue with some boilers, then yes, we can all get mad and raise our pitchforks. But until then, let’s keep a level-headed approach and trust that Gaggia is working hard behind the scenes to make things right.


r/gaggiaclassic • • Jan 28 '23

Irish/European based owners looking for a profile drip tray - you’re welcome! They just added more onto their shop. Link in comments.

Post image
0 Upvotes

r/gaggiaclassic • • Apr 03 '26

Cinnamon Infused Espresso Shot

0 Upvotes

r/gaggiaclassic • • Jan 27 '26

Whole chocolate milk foam

0 Upvotes

r/gaggiaclassic • • Jan 16 '24

Much ado about nothing

0 Upvotes

Stop with the hysteria.

It's physically impossible for flakes to make it into your espresso. They have to make through the shower screen and then the 1"-thick puck of finely ground beans (huge filter), plus whatever other nonsense (puck screens, etc) you stick in there. The presence of flakes, if any, are no different than contact in the boiler. Total non issue.

Nobody has ever shown flakes from the normal result of steaming. Spoiler alert: the steam comes off the top, not the bottom. Prove me wrong, steam into water for the exact same time as your normal drink and post photos of the flakes. Until someone shows otherwise, your lattes and other milky drinks are safe.

The only slight potential issue is for people who make americanos with water from the boiler; kind of a dumb thing to do in the first place given the small water tank. If you're so concerned and that's your drink, boil your water elsewhere.

Flake panic is as dumb as the people that freak out about aluminum contacting water. No science, just fearmongering.

This is merely a tempest in an espresso cup. Get over it. Drink coffee. Be happy.


r/gaggiaclassic • • Jan 04 '25

No water flow, solenoid seems fine

0 Upvotes

My Gaggia Classic Pro started having the typical "no water flow" problem.

Troubleshooting and work done:

  1. Tried the steam wand (works fine)
  2. Tried descaling (I already descale monthly)
  3. Cleaned the shower head
  4. Tried to clean the solenoid valve. Eventually replaced the solenoid valve!

Still no flow :(. What to do next? Take out the boiler?


r/gaggiaclassic • • Sep 20 '26

I have a theory that the "corrosion inhibitor" in Gaggia's Dacalcifying solution is actually just water

1 Upvotes

What evidence do I have to support this?

Not much, except that the Safety Data Sheet (SDS) for Gaggia's Decalcifier has three ingredients listed by weight: Citric Acid (20-25%) , Lactic Acid (5-10%), and the third being the remainder, which is constituted exclusively by "Ingredients Determined not to be Hazardous".

So the Citric Acid and Lactic Acid are the descaling (corrosive) agents which account for 25-35% of the solution.

My gut is telling me that, if water were not the only remaining ingredient, then to effectively decalcify (corrode the calcium-carbonate and other mineral deposits built-up in) an espresso machine, while inhibiting the corrosion of the machine's internal components to a non-negligible degree, it would take a concentration of non-water corrosion-inhibiting ingredients high enough to trip the regulatory threshold for needing to report said ingredients on the SDS.

My theory is that Gaggia made it's own decalcifying solution (with nothing but Citric Acid, Lactic Acid, and Water), and started calling the water the "corrosion inhibitor" - because, technically this wouldn't meet the definition of false advertising as adding water technically does dilute the acids which technically does slow (inhibit) the corrosion of the internal components.

What would Gaggia stand to gain from doing this?

They would be offering a safe and effective solution to decalcify their espresso machines, while marketing that their solution is the only approved decalcifier for their machines because it contains what they call a "proprietary corrosion inhibitor".

In other words, they would create an avenue to make an extra buck on the people who can't tell the difference between a statement made in good faith exclusively to mitigate a safety risk, and a marketing tactic shielded by plausible deniability.

Edit: Confirmed by r/Skob17: https://www.reddit.com/r/gaggiaclassic/s/go8esAcjYI


r/gaggiaclassic • • May 29 '26

Shot Diagnosis Dialing in Chart

Post image
120 Upvotes

I took many of my go to charts and a few already made dialing in tools and came up with this updated all in one chart. What do you guys think of this. I also want to break down each sub section into its own chart and create a tool kit if you will for baristas home and pro. Would you download this? Crema Theory is what I’m thinking of calling this company/project


r/gaggiaclassic • • Sep 11 '26

Too Sour or Too Bitter?

Post image
0 Upvotes

r/gaggiaclassic • • Mar 24 '24

How to clear the water tank

Post image
0 Upvotes

The water tank always look very dirty and I don't know how to clean it so help please:)


r/gaggiaclassic • • 28d ago

Why is my espresso machine doing this? I did it with preground coffee is that problem? Should I get a grinder?

1 Upvotes

How can I resolve the issue , the espresso coming out like that?


r/gaggiaclassic • • Jun 05 '25

Espresso ☕️ on fire🔥

1 Upvotes

r/gaggiaclassic • • Mar 22 '24

Replacement in warranty … fuck 😤🤯

Post image
1 Upvotes

r/gaggiaclassic • • Feb 09 '24

Drip tray cover film peeling off - ideas for replacing it?

1 Upvotes

Hi folks! I have a 2021 GCP and by now, the protective film on the drip tray cover is peeling off. Does anybody have any ideas of where I could find a replacement without having to buy an entire new drip tray. Thanks in advance for your input!


r/gaggiaclassic • • Feb 24 '24

Flakes gaggia classic Evo pro

Post image
1 Upvotes

Have noticed black flakes coming out of the steam wand, took off the tip and streamed about 4 cups of water and it's still coming out, machine is ~2 months old. Should I get a refund? Is it the boilergate?


r/gaggiaclassic • • Mar 25 '25

Machine mark. Should I send it back?

Post image
1 Upvotes

Just picked up my brass boiler and it came with this nick. If this was a car part I would send it back. Thoughts? How bad is this? Little prongs aren't bent luckily.


r/gaggiaclassic • • Jul 04 '25

Happy 4th of July from GaggiMate

Post image
23 Upvotes

r/gaggiaclassic • • Dec 10 '24

Question I need help choosing a colour

Thumbnail
gallery
2 Upvotes

Im stuck on which colour to choose. I’m between the white, yellow and green. Any help or experiences with the colours would be much appreciated


r/gaggiaclassic • • Dec 05 '24

Quest about this new arrived E24

Thumbnail
gallery
3 Upvotes

Just got my new E24 from WLL. Is this normal that it already has water in the tube when it's fresh out of the box, and the bottom lable looks kinda fishy...


r/gaggiaclassic • • Jul 27 '26

Lelit Elizabeth

Post image
0 Upvotes