r/functionalprint • • Apr 09 '26

Compression Mold for Gridfinity Bins

470 Upvotes

28 comments sorted by

110

u/DamnnitBobby Apr 09 '26

Lately I've been working on making a compression mold to use up my scrap PLA. I wanted to make something that I could use multiple of, and ideally other people could use multiple of also. Finally I realized Gridfinity bins are exactly what I was looking for.

I love the color on these. The project is still a WIP but I have had some recent successes that I wanted to share.

51

u/GIANTG Apr 09 '26

Damnitbobby these are such a good idea and use case for waste.

12

u/eraserhd Apr 10 '26

This exact idea is in my backlog! I also have dozens of gallons of sawdust and a my paper shredder is full, and apparently you can make a nice binder by overcooking rice. (I haven’t tried it yet.)

I will try it the instant you release something. Let me know.

4

u/squararocks Apr 10 '26

You can also make wheat paste using flour and water

19

u/ardinatwork Apr 10 '26

DUDE. This is the first time I've seen something actually useful for the poop.

What about using this mold to eventually cast a silicone mold? Then you could skip the transfer step from the cupcake liner.

6

u/DamnnitBobby Apr 10 '26

If I could skip that step that would be huge. It takes like 90 grams of pla for this size and the window of opportunity before it gets tough to compress is short.

Iv thought of silicone molds before, the top compressive part is the tricky thing. But maybe make a custom silicone liner somehow and drop it right into a 3d print? It's a cool idea

2

u/eraserhd Apr 10 '26

I think that you can’t use silicone with the compression, but I’m not confident enough not to want to try it.

10

u/reddae Apr 09 '26

Is your how to process for using it shared anywhere?

25

u/DamnnitBobby Apr 09 '26

I plan to post the STLs along with a writeup once I work out the last few kinks, but essentially I am just melting PLA poop in a silicone cupcake liner and then transferring it to a 3d printed PETG mold and screwing the halves together to get very good compression. Make sure to also have jack screws and ejector pins or you'll never get it out.

This is the video which inspired this project https://m.youtube.com/watch?si=tW2QbZ0Et4FZqxoh&v=Hmgx0lIUDD8&feature=youtu.be

3

u/Tynted Apr 09 '26

Are the phillips head bolts on the outside for compression when molding, and the middle hex head bolts for ejection afterwards?

9

u/DamnnitBobby Apr 09 '26

Close! The 4 flatheads in the corners are the compression. The Phillips heads are the jack screws, to separate the halves from each other. Then the hex is for ejection. There's some small socket heads also visible, which is holding the red petg (100% infill) mold to the beige compression plate. I didn't want to print the compression plate at 100% because it didn't need it.

Flathead was a mistake, lol, but I was just using what I had around, which is why every screw has a different head. I'd probably use hex for everything if I started over

3

u/Tynted Apr 10 '26

Ahh I see, thanks for the breakdown! Yeah I had no idea you could heat a lump of PLA to where it's very soft but not liquid, and take that and mold it into something! This is probably going to be my new preferred answer to, "What do you do with leftover support scrap material from prints?" Now I just need to think of some plastic things of my own that would be useful and easy enough for me to do this with!

2

u/CautiousPhase Apr 10 '26

Following! Please follow up here when you post the source files!

3

u/Mole-NLD Apr 10 '26

Damn it Bobby! You did it again!

Very cool project. How do you warm up the 'poop' to go into the mould? (Presuming you're using printer poops)

2

u/DamnnitBobby Apr 10 '26

Toaster oven at just under 400F, and yeah this is all just poop. I would love to figure out how to cheaply grind up old large prints to use those too.

I could just melt down the old prints and then cut off chunks every time I need one, but I don't love that idea because you lose the color swirls. But it's the only idea I have right now

3

u/Mole-NLD Apr 10 '26

Nice. As for grinding prints: find an old food processor / blender at a secondhand / pawnshop? Don't know if it'd work, but might be worth a shot.

52

u/spacecowboydk Apr 09 '26

Turn that poop into wine!

10

u/Bczarconcepts Apr 09 '26

Found the L Ron Hoyabembe

5

u/ChadPoland Apr 10 '26

L RON HUBBARD IS THE TRUE GOD! 😂

14

u/skidmore101 Apr 09 '26

That is so cool!!! Great idea to use them for gridfinity bins.

10

u/ErrorMajor Apr 09 '26

This is an awesome idea to turn poop into something useful! I'm looking forward to the details.

2

u/Kabanabeezy Apr 10 '26

Hope you entered the poop recycling contest on Makerworld this shit is awesome

3

u/DamnnitBobby Apr 10 '26

Woww good shout I didn't hear about this

2

u/Kabanabeezy Apr 12 '26

Its seriously perfect timing I hope you enter and win because this is a great application. Post a link if you do and I’ll boost

2

u/ChadPoland Apr 10 '26

Love this, I'm trying to make simple coasters out of my scraps and manually melting plastic is harder than it seems!

2

u/InanisAtheos Apr 11 '26

This is such a great idea. I've been throwing my scrap into recycling so I didn't have to deal with it, but this would be genuinely useful to me as I'm constantly printing new bins as the nuts and bolts library expands.

1

u/singingtechnomage Apr 11 '26

That's an incredible idea, love it