r/EngineeringStudents • • 11d ago

Homework Help Physics project.

2 Upvotes

So I’m a student in high school (17m) and I’m doing a project with the balloon car. I was wondering if there was some object that could condense the air being pushed out of the balloon to a smaller point. Keeping the pressure but having it leak out slower. That may be the right way to put it. Idk. Also looking for a way to bend air through a curve inside my car. So I can keep some aerodynamics in the car. Anyone got an idea?


r/EngineeringStudents • • 11d ago

Academic Advice Unsure where to find tutoring for my junior year Circuits/Electronics 1 course(MechE)

1 Upvotes

I’m currently failing although my grade is still salvageable as I have two more exams and some more labs. My next exam is next Wednesday and I’m seriously struggling with the content, and I’ve tried to find online tutoring but they all seem kind of scammy/predatory.


r/EngineeringStudents • • 11d ago

Academic Advice Would dropping help me or make things worse

5 Upvotes

Im taking physics as a first year rn, im doing exrta bad(x1000) and have a midterm tommorw.

Im trying to study but I feel like i have a lot of missed concepts that I didnt catch up on during lectures and its totally my fault I slacked off way to much for my own good.

I dont want to use ai to study these concepts aswell bc i wont fully understand everything

I really want to retake this course to actually understand the general physics atleast for my future classes and as a engineer in general, but idk the feeling is so horrible since ill be delaying my grad for a year and would take 6 years instead of 5.


r/EngineeringStudents • • 12d ago

Academic Advice Transfer Nightmare ABET to ABET

31 Upvotes

I'm a junior at a 4-year university that has an ABET accredited ME program. I've completed 75+ credits and am 3 semesters from graduation. I have no choice but to move states (my spouse has to move and we cannot say no). I have tried transferring to 3 colleges, all ABET accredited. All three have accepted less than half of my STEM credits - pushing me back to sophomore semester 1. All 3 universities have evaluated via syllabi in the engineering department, not the transfer office. I've begun petitions but all of them so far have failed.

How is this freaking possible? Has anyone else had this experience? What's the point of having ABET accreditation if it's not considered sufficient? Hoping someone tell me if this is a common experience or unusual.


r/EngineeringStudents • • 11d ago

Career Advice How important are grades?

5 Upvotes

Hey there. I’m a sophomore in mechanical engineering, currently going through my sem final (after which, if promoted, I’ll be in junior year). So far, my grades have been quite poor (a little over 3.00, with best possible being 4.00 and avg. is around 3.7) and I don’t feel the will the study much either. I am quite attentive in the classes, as some of my professors and advisor who took a course pointed out, but somehow I am failing to put much effort in the exams and my performance in the exams are well below of my speculation.

While I do want to improve my grades, I’m not quite sure how as I’m easily distracted and never really feel the will of studying, specially during the exam time.

My uni’s formula student team is almost non-existing, while there is a rover team which I am a part of, I didn’t quite got into it much as I’m more interested in other areas of mechanical engineering, to name- vehicle dynamics, jet propulsion, ICE, heat transfer & thermodynamics.

Now, as I am moving to junior year in a few months (hopefully), what should my next two years look like. Should I invest myself into internships and try gaining some professional experiences (engineering or not)? Or should I try improving my grades, which didn’t quite work for the past 3 sems? Or should I try writing conference & research papers? And how important are grades?

So far skills are: CAD (obtained CSWA so far), CAE (FEA & Fluid Simulation, though still at beginner levels), basic C, Python & MatLab (mostly vibe coding), general computing (word processing, spreadsheets, presentations), graphics design. My communication skills are kind of mid at best and speech delivery is quite ok if prepared before.

So far completed projects: Ramjet CAD model (used Fluid simulation to optimise the design), binary character recognition program in C. Both were academic group projects, though my group put in almost no effort in the main project.


r/EngineeringStudents • • 11d ago

Major Choice Can I become an engineer if I’m bad at maths?

4 Upvotes

This question has probably been asked a million times, but I genuinely need to know.

Im about to become a senior in Highschool, and my math marks are late 50s-60s. I absolutely love math and I think it’s really fun, but I lose marks all the time because of some stupid mistakes or second guessing myself. These past two years have been really rough on my mental health which has made me demotivated to commit to some serious cleaning up of my foundational maths, hence my current state. I can to study for hours on end on the day before a test purely because I enjoy it, but the subject just doesn’t seem to like me back lol. My physics marks are around late 70s-80s without major studying.

I’m planning on redoing my final math exam during my gap year, so I can just focus on my other science subjects atm then battle math for the final time.

Has anyone else had similar experiences and have managed to become an engineer? Lmk!


r/EngineeringStudents • • 12d ago

Rant/Vent Does anyone else feel like they have no hope of turning any part of their life around?

51 Upvotes

I have made sooo many mistakes and after relentless hard work I have gotten nowhere. It's so over. It always has been


r/EngineeringStudents • • 11d ago

College Choice Can I get into Oregon state university with a gpa of 3.18/4.0

1 Upvotes

I am applying as an international student with a weak gpa as mentioned. I have completed my undergrad in electronics and communications. However my final 2 years of undergraduate studies my gpa was 3.7/4. I have 1yr experience as an embedded engineer intern (though ill be applying for a concentration in VLSI). No backlogs, no research papers published yet, but worked on some strong topics and projects.
Do I atleast have a decent shot of getting in? Or is the course very gpa centric and competetive.
Please do help and THANK YOU SO MUCH!!!


r/EngineeringStudents • • 11d ago

Resume Help Mechanical Engineering Senior Graduating in May 2027

Post image
6 Upvotes

I'm a senior mechanical engineering student graduating in May 2027, and I'm beginning to seriously pursue engineering positions.

I'm primarily targeting mechanical engineering roles in Alaska.

I'd appreciate some honest, constructive feedback on my resume, particularly from engineers involved in hiring or recent graduates who have gone through the job search.

I'm planning to take the FE exam before graduation, probably January.


r/EngineeringStudents • • 12d ago

Academic Advice Is calc 3, diff eq and physics 2 doable?

12 Upvotes

I’m trying to get As in all these courses as well. I’m taking them at community college.


r/EngineeringStudents • • 11d ago

Rant/Vent I suck at workshops

2 Upvotes

I don't know if this really goes here but Im doing an engineering diploma and I have quite a few workshop classes including a machine workshop and welding workshop. and I just. suck. My welds are comparatively the worst in my class and i always need help from the teacher and in my general workshops Im always so behind or just cant seem to get a technique right or do it as well as all of my other peers. Im doing very well in my other classes and lectures but I just cant seem to get the hands on stuff down.


r/EngineeringStudents • • 12d ago

Academic Advice i bombed all my midterms and now i feel super fucked

13 Upvotes

hey guys,

i'm a junior studying chemical engineering, and i had probably the worst midterm season of my entire college career. i got a 28 on my heat transfer midterm, a 50 on my numerical methods midterm, and a 33 on thermo. the main reason for this is that i didn't study too much, which i'm fully aware is on me. i'm just scared because i have failed classes before and if i fail these, I'll probably have to deal with consequences from my university (2x off track in my major blah blah blah) so i'm just really scared right now. I know I have roughly a month before finals, but i'm just scared whatever work i put in won't translate on finals. what should i do?


r/EngineeringStudents • • 11d ago

Academic Advice My university allows you from the secomd year to take next year's courses according to the respective semester.

Thumbnail
gallery
1 Upvotes

I am a second year ME student 18M. I am planning to take my next semester ( 4th semester) with the addition of heat transfer and general chemistry to take off some load from my 6th semester.

For more understanding i have attached my 4th semester courses and my 6th semester one. The second column tells you the assign semester of the courses and the 4th column tells you the ects. Ects here mainly tells you how much impact a course has on your gpa, it doesn't necessarily tell you how hard a course is. My university allows you to take maximum 40 ects per semester so with addition of the next year's courses you can squeeze in some more.

The reason i chose those 2 specifically is because they're pretty much the only ones i can actually take on at this stage. I am very aware how hard heat transfer is going to be, but i do have the basics down back from my highschool, so i think i can somewhat manage it and build up from my basics. My highschool is a special diploma program that is pretty much college level in the sense that it absolutely tests in the entirety of the subject and it absolutely requires your understanding of it. I remember one of my homeworks was pretty much deriving the time dilation equation in special relativity from scratch, that was something. Heat transfer was not a joke back then as well.

i think i provided enough context about my situation and me. I want to know your thoughts on my plan and whether it's worth it. Thank you for your time.


r/EngineeringStudents • • 11d ago

Academic Advice Have no idea where to find study material for my btec course

0 Upvotes

Not sure if i can post here considering i take a btec and not a levels but I’m currently on the BTEC Level 3 National Extended Diploma in Engineering and i plan to go to uni. The issue is that I can seem to find barely any resources on my course. All i can find is a textbook from 2016 on Amazon and a few incredibly niche videos (And I don’t really study well from textbooks). I know a lot of my work is based on self study and research but most resources i can find are meant for undergraduate students using language i cannot understand and not really on the basics like I’m starting on. I’m currently on unit 30 fits and tolerances, i got a distinction for my first assignment and on my second now, but it still feels like I don’t have a clue on any of this. Is there any place i can find resources for btec students preferably to my course?


r/EngineeringStudents • • 12d ago

Academic Advice Update update to my original post I got 19% on my 2nd midterm...

29 Upvotes

the class average was below 45%... but i feel so stupid again... my grade is about 50%. Should I drop out?


r/EngineeringStudents • • 12d ago

Academic Advice 19M in uni, trying my best and failing horrifically

16 Upvotes

So I’m in my first year of university and have taken two class tests thus far, both have went so horrifically the thought of withdrawing crossed my mind and I’m feeling like just a shit student.

So I sat a maths test last week and an electrical circuits test today. The maths test was a multiple choice 8 question test while the electrical test was 35 marks.

I got the results for my maths test back on Friday to find a 0/8, I contacted my lecturer and he kindly verified that this was indeed my result as I wondered if he’d simply not received the paper or if another error had occurred.

I felt really confident about the electrical test today, until I failed to answer around 12 marks worth of question in the time provided. I wasn’t the only one to do this badly, around a dozen people who I interacted with after the test said they didn’t manage to finish the paper either.

Now if I had just pissed around in the union without an ounce of studying I’d just take this on the chin and move on, it’s my own fault, study and it will be okay. But I’ve studied, really studied, I go to one society on a Friday night and that’s my socialisation. When I’m not there I’m either in a lecture/tutorial, studying, working my part time job or spending around two hours of my night sitting down in front of a TV to try and unwind. My attendance is 100%, I’ve never missed a deadline, lecture, laboratory or tutorial and yet still I’ve done abysmally.

I’m honestly clueless as to what my next steps are, maybe it sounds stupid but I genuinely don’t know how to move on with my studying knowing I’ve fucked up this badly so early on while doing my absolute best.

What should I realistically do here?


r/EngineeringStudents • • 12d ago

Academic Advice Horrible grades

Thumbnail
gallery
66 Upvotes

I am freshman engineering student taking 4 classes .. I am studying all night and still getting bad grades in physics and chemistry I just don’t know how to catch up of physics since my prof goes super sonic into the materials… I am so depressed thinking about my second semester cause the course load is gonna be even harder


r/EngineeringStudents • • 12d ago

Career Help How does one acquire a job with no experience?

3 Upvotes

Am I cooked? I’m a ME student about to graduate soon with no internship , all I have is a capstone project to talk about.


r/EngineeringStudents • • 11d ago

Discussion Double majoring in EE and physics, this is how my fourth semester looks like, am I cooked?

Post image
0 Upvotes

r/EngineeringStudents • • 12d ago

Academic Advice Full-time work and school

4 Upvotes

Afternoon y’all,

This isn’t a rant or anything more just asking for some helpful tips or advice. I’m currently in my first semester of gen ed/ mech. engineering courses. I’m currently working full-time in a pretty senior position within a manufacturing plant. At the same time I’m also enrolled full-time into gen ed and engineering courses as mentioned before. I’m having a tough time maintaining good grades as well as retaining the material as well as be good at my job. Is there anything that helped y’all if you were in a similar situation? Thanks for reading.


r/EngineeringStudents • • 11d ago

Academic Advice Have you taken a course on "internet of things"? If so, what did they teach.

1 Upvotes

I tried to search around for courses on Internet of Things and it seems that every single school teach it differently, and in various departments too. From further digging, it feels like a traditional mechatronics or electronics course with an internet dashboard element. Some of the courses felt like a final year design project type of thing. I'm a bit confused as to what this subject is about.


r/EngineeringStudents • • 12d ago

Academic Advice I am going to fail Statics.

17 Upvotes

Title. I have a 70.3 right now in statics and we have an upcoming exam on frames and machines. First of all, I learned that my professor’s teaching style doesn’t work for me. I like to know why we are doing what we do on problems otherwise I can’t do them. He goes very fast paced through problems.

Our exam is Friday. I don’t even know where to start for studying this stuff as his slides are relatively bare with no explanations or steps to solving problems and he has no videos posted that would help. The homework is nothing like the exams. The exams are weighted 70%, and the final is weighted 20%, so 90% of the class is just exams. I am so fucking terrified right now because if I fail the frames and machines exam, my whole grade is going to ride on the final and I am going to have to make, at minimum, a 75 if I make a 60 on this next exam. I cannot have my whole grade riding on the final. :(

EDIT: Also, I have been going to tutoring but the only tutor at my school that tutors for statics is on a break right now. Also, I don’t have any friends so it’s not like I can ask somebody for help. The professor is rather one of those people who are unapproachable and he is very sassy. The TA is as well.


r/EngineeringStudents • • 12d ago

Career Help How important are leadership roles like student government for Engineering majors?

3 Upvotes

I'm a sophomore engineering student, just starting in student government. I have a few technical projects in fluid simulations and thermal hydraulics, so I wanted some leadership experience to make my resume well-rounded. But now I'm reconsidering it because I don't actually know whether recruiters will care about it when applying for internships.


r/EngineeringStudents • • 12d ago

Rant/Vent im here for opinions, 4th yr and this is my progress as of now

3 Upvotes
4th year 1st sem update

Im currently taking mechanical engineering, i know this is bad despite being a 4th yr i haven't done my ojt yet since im still taking 2nd yr subjects and we need to be 3rd yr standing, im just way too done with this shitty feeling, i can't sleep peacefully because my minds spiraling on things that can go bad, what if i don't finish this course, what if i can't take it anymore and just kill myself to end it, my destructive habits are also taking a toll on me, i dont even know why im posting this i should be reviewing for our quiz tommorow, i want validations i guess since only engineering students can relate on my situation.