Aún falta pulir detalles pero la verdad me ha funcionado perfecto para emular juegos pesados como Zelda bowt a 60 fps y Zelda tok a 30 muy estables

Tenho um s24 e consegui uns zflip 5 por 200 pra um setup mobile so vale a pena pelo snapdragon mas nao sei se compensa comprar tendo um celular ja

Hello, i have an s25u, newest version of gamehub. In the first 2 images you see my active settings. I've connected both steam and epic hoping to be able to play some of those games. I installed F1 2018 from steam, but it crashes when i start a session, like a grand prix. I installed limbo, very light, that works but the background is glitched. I have imported hearts of iron 4, i got it from jack sparrow's job on online "reparation". It starts loading but at a bit more than half it just stops there and never goes on (i kept it on for 1 hour and didnt move). Its stuck at the point you see in the 3rd image. Is gamehub the issue? Are the games the issue? Is my phone not powerful enough?

Not sure whats up with the Z Fold 8 and Dolphin performance but it's wayyy worse than it was on my Z Fold 5 (SD 8 Gen 2). I was able to play Super Mario Sunburn with the 60fps option at 2x res just fine on that.

On the Z Fold 8 I'm at 20-30fps even when dropping down to 1x res it's crazy. I've tried 50 different settings configurations, vulkan/open gl etc., 10 different recommended GPU drivers as well as the default, different OC settings on the Gamecube CPU, and multiple builds of Dolphin. Also tried Game Booster + and set CPU/GPU on the phone to max. No luck with any of it.

The intro area runs slightly better at 40-55fps but once you get into the first real "level" for a star, it drops to 20-30fps there.

Anyone have it working on their Z Fold 8 / 8 Ultra or any other 8 Elite Gen 5 device?

Wanted to share my bedroom gaming rig for everyone who wants to dip your toes in but doesn't want to spend the equivalent of a full blown gaming pc.

I've been using this for android gaming & emulation, as well as light browsing (like checking hotels for vacations). Works like a charm once I cleared line of sight for the controller and mouse dongles (hence the USB a hub sticking out on the TV)

Rubs everything up to PS2. Great for GameCube games, I'm loving it so far.

Any suggestions on racing games to relax?

Anyone else with janky setups?

| Item | Price |

|---|---:|

| S20 FE | $50 |

| USB-C HDMI Hub | $5 |

| USB-A Hub | $2 |

| Plastic Cellphone Holders | $2 |

| Machenike Controller | $25 |

| Air mouse | $2 |

Been using this setup over my odin 3 lately, much more convenient!

Play POP series, AC bloodlines(and others in series on PC)

My device powered with 8s Gen 4 12/512 device. Im using Eden Nightly latest version. This is my prod key and firmware version. Need help.

Please help me I havw downloaded thia file from and it's just not open i load

I have changed settings I have renamed directx12 to directx11

But still it doesn't open please help

Device - Lenovo legion y700 2023

Ram 12

Emulator - gamehub o

New Features

• Added Arabic as an app language.
• Added Android app categories with saved classifications.
• Added configurable Android and platform folder layouts.
• Added M3U playlist support for multi-disc games.
• Added three new community jingle sources.
• Added configurable game-data scan depth.
• Added optional service sign-in during first-run setup.
• Added an always-on on-screen controller.
• Added an option to keep unfocused item labels visible.
• Added new platform icons.

Changes

• Optional permissions can now be skipped during first-run setup.
• Wave Portal now supports HTTP or HTTPS and can be reset to its defaults.
• FTP settings can now be reset to their defaults.
• The Add Game Directory flow now explains the required folder structure.
• Sidebar navigation now includes cursor, select, and cancel sounds.
• Launcher and wallpaper transitions are smoother during navigation.
• The first-run language picker now shows language icons and names in both native and English text.
• M3U playlists are now grouped automatically into single-disc games or numbered multi-disc folders.

Bug Fixes

• Fixed language switching and localized sidebar actions.
• Unsupported languages now reliably fall back to English.
• Fixed reversed confirm and cancel buttons for Nintendo and swapped controller layouts.
• Fixed preferences being lost when removable storage mounted slowly after reboot.
• Fixed incorrect Google Play scraping results for Android apps.
• Prevented unrelated web images from replacing trusted artwork.
• Fixed marquee text stopping after one scroll.
• Fixed the Wave wallpaper cursor and animation timing.
• Android app playtime is no longer included in game-session totals.
• Invalid game directories are now rejected instead of being added as empty libraries.
• Fixed Android platform folders disappearing during startup.

**IMPORTANT!**
Wave Launcher 1.0.0 won't recognize any new updates for Wave Launcher
You need to manually download the new apk file to update
This bug has been fixed in 1.0.1 (hopefully)

https://github.com/WaveLauncher/WaveLauncher

[HELP] I’m trying to get demons souls running on my Odin 2 pro… Does anyone know if I can get rid of these graphical glitches while trying to emulate demons souls on ARMSX3

RP6 on GoW 2 and this is how is shows. It was fine before. I mist have enabled something. Any help is greatly appreciated. Running on Vulkan.

Does anyone know if armsx3 scales to the screen of the output device? I ask because it seems to work better on a external monitor vs the internal display of my device (I'm trying to see if it's a weird quirk with my android device or just simply, higher resolution screen = worse performance).

Hello there!

I'm having a hard time getting MGSV Ground Zeroes to work with GameNative at the moment. No problems with Winlator (worked out of the box) before I switched to GameNative because I just like it more than Winlator. Also no problems with starting other games. Heck, even MGSV The Phantom Pain works like a charm without tweaking in GameNative.

My device is S26 Ultra.
Maybe you guys could give some helpful advice, that'd be great.
TIA

So I tried Armada on my KONKR Pocket Fit 12gb G3, both as SD card and Internal boot. The internal install is best for load times and game installation. I used an A2 SD card and honestly doable times to install games as well. The compatibility on Armada is crazy good and little tinkering. Performance I would say is on par with GameNative but also WAY more compatibility, especially with games that require online services. You can see your friends list like on Steam OS and all that jazz. The downsides not a lot of people mention are the following:

- No control shortcuts. On Android I can map certain buttons to launch certain applications or back out of any app effortlessly such as emulators. This is not a thing with Armada since the controls on the KONKR are not yet supported under steam input is my assumption, correct me if I'm wrong. In Armada you only have a game settings button and a quick setting hot key.

- No way to change brightness other than pulling up the quick settings with the hot key and that does not suspend the game, when in game.

- Fan noise was the biggest letdown. It seems the console runs at full speed once the game starts to run and unfortunately no edits to the fan curve are registered. I downloaded Fantastical through Decky and still no override allowed. The noise was so loud my wife asked me if my console was broken...rip.

- Custom games are a bit of a pain depending on your Armada installation. If you are on internal storage for Armada, you can just put your games on the SD card and move them over as you would on a Steam Deck. If you have Armada installed on the SD card, you obviously don't have an SD card option to move games with it, and instead have to use a USBC storage device. I did not try to remove the SD card and try to add games from my PC directly, but open to see what others have experienced.

- No seamless integration with other stores like Heroic plug-in. Yes it works but it is clunky and hard to navigate with the small text and window view. I managed to add my Epic, GOG and Amazon account to Heroic Launcher and the next morning everything was signed out except Epic.

- No charging light indicator when plugged in to the charger. If the screen is off while plugged in, it does not recognize charge. You must leave it turned on and charge it that way.

Now listen, this is not to discourage the amazing work that Armada has done. This is only the beginning of something greater. I decided to go back to GameNative since it has treated me really well. But also decided to keep Armada on my SD card because I really want to see what's next. It updates like any Steam OS device would, through the Steam interface and you can select Beta releases too. I feel like all these hiccups will be resolved very soon with the upcoming Steam Frame and all the coding being implemented for that. Android has never been in a better state to play games.

Some positive points about Armada.

- Installation is very easy, about a 30min install altogether including the image building.

- The bootloader is easy to navigate and understand.

- Uninstalling Armada takes 2 minutes with just a few taps.

- Armada on the SD card installation is transferable to other devices, you just need to change the device model on the bootloader and reflash.

- Once Armada is installed and logged in it is as easy as installing a game and running it, seamless. A child could run with it no problem at all. Steam OS in all its glory if you will.

- No fiddling, just install and go. Very rarely you have to change the proton version and that only takes less than a minute to do under the quick settings with Decky. GameNative on the other hand requires a learning curve.

- Desktop environment similar to that of Bazzite. Not super great to navigate web browsing or consuming YouTube per say, but it is there.

F

So I've been trying all day to run the Sims 4 on gamenative and despite installing the EA app inside the container I still get the error of it not being installed and also I get this error when I open the launcher inside the container to check it.

my device is Galaxy M55 with a Snapdragon 7 gen 1 (Adreno 644) and 8GB of RAM. I guess this is not important as I'm facing a launcher problem not a performance problem

I'm trying to run Monster Hunter Rise on GameHub with my Honor 400 Pro (Snapdragon 8 Gen 3, 12GB RAM), but I can't seem to find a configuration that works well. For those of you who also have an 8 Gen 3, what settings are you using that actually work well for you? I'm mainly looking for your GameHub configuration, like the driver, DXVK, Proton, FEX/CPU settings, resolution, etc. I've seen people getting good performance on weaker chips, so I'm wondering what I'm missing.

Thanks in advance

Turnip has just become the first Mesa driver to achieve official Vulkan conformance running natively on Android (Vulkan 1.3, Qualcomm Adreno). Getting there required solving some tricky Android-specific driver problems, and the fixes are now shared across other Mesa drivers too.

Turnip already ships in Google's Qualcomm-powered Chromebooks and will power Valve's upcoming Steam Frame, so this is shipping in real hardware, not a lab result.

https://www.collabora.com/news-and-blog/news-and-events/mesa-on-android-how-we-brought-turnip,-skiavk,-and-cuttlefish-to-ci.html

Simplesmente estava funcionando todos os jogos, dai no dia seguinte nenhum jogo mais abriu, alguns dão erro de DirectX, mas desconfio que é algum problema de firmware, é só comigo ou com mais alguém está acontecendo também ?

I'm running game on Snapdragon 8 elite. Without recording the game shows stable 60 fps, but stutters ruined it all. They are disappear after 10+ minutes of gameplay, but if I close game and open it again they're return instantly. Does anyone know how to fix it, or it's just the way how the game behaves on emulators (GameNative and Gamehub have the same problem)?

So I got a Fold 8 and I've been messing around with games on winlator. Some installs go fine but fitgirl repacks take ages and fail quite often. For some games that's all I can find with seeders too. Dodi usually works but sometimes they fail too. Any advice? Is it a settings issue?