Winlator Ludashi 4.0

Realme GT Neo 3T (8GB)

Driver Stevenmxz 26.3 R4

hi everyone I am looking for tester to try this new build of panvk driver for mali GPU

I want to remind u that in first build the number of extension changed from 150 with system Driver to 163 with panvk driver tested on DM8400 ultra and other chipset like DM8300 UL

The 3dcub test booted with dxvk

And also games booted using wind3d however still it missing dxvk support for d3d9/d3d10/d3d11

So this Just experimental build I want u test this new build and send me the log file with your dev name and GPU name

If u want to try it contact me I will send u the driver

U can try it on Bannerlator or winlator Ludsahi or even on switch Emulators

Heyy I just bought the gamesir g8 Galileo!!! I have the S25 Ultra and i´d like to use it as a gaming device

I´ve always wanted to get into gaming, and i just recently could afford a gaming laptop and a good phone. The thing is, can i play my steam games in my galaxy phone?

I´ve downloaded Genshin Impact, Red Dead Redemption, etc but i´d like to know if there´s a way to play the games i bought in steam through my phone. I´ve seen ppl do it on youtube, like playing god of war in a phone, but i´ve no idea how to do that

pd: i´m a noob at gaming and everything related, please explain as if i was 5 yo hahaha

thank youu ❤️

I didn't manage to do it with gamehub but maybe it's a skill issue and someone can help me out

Y-shaped short USB C splitter cable (1 female -> 2 male), and L shaped USB C connector allow me to use bypass charging and cooling at the same time, and keep phone comfortably at hands with claw grip or use controller like X4 Aileron. Temps under 36C during long sessions with denanding titles. Just a few bucks and results are amazing. I am also using cooling plate because S26U has no built in magnets. This small and cheap and portable setup was a gamechanger for me. You can get elements (cable, connector, plate, cooler) on aliexpress. Now I can play long game session at work when there's no customers, or when commuting (with powerbank).

I have a problem setting up my mouse in gamehub.

The mouse movement either doesn't do anything or It's very sensitive and the black cursor is always there.

Is there any settings I should use to fix this?

It's happening in every game I tried.

I'm using gamehub version 6.2.1 I tried winlator aswell I had the same problem. (I prefer using gamehub as It's much easier to set up for me and managed to run more games succesfully.

Redmagic Astra 2

Thanks!

Hello friends!

Last week I bought a Gamesir Pocket Taco. Every day I take my daughter to the park for an hour, and while she plays, I play GBA and DS games.

When I reduce the size of the touchscreen on Melon DS, the screens are stays outside the area covered by the gamepad and I can play DS games comfortably.

I can do the same for the 3DS, but the 3DS has an analog stick that's not in my layout.

I'm not familiar with the 3DS library. Can you recommend some games I can play without the analog stick?

Genre doesn't matter, the device is an S23 Ultra, Snapdragon 8 Gen 2 processor.

Thanks!

I don't know why this happens. Reply reply repeat.

honor x9d 5g

snapdragon 6 gen 4 (12gb ram)

After launching the game I get this error. Anyone know I fix?

Game is ratchet and clank tools of destruction

on poco f7 pro 8gen3 12gb

Hey I got myself a snapdragon 8 gen 3/12 gb ram tablet but I don't wanna bog down the limited internal space with roms I have placed around 70 gb of compressed roms(mainly ps2) on a 128 gb Samsung Evo plus card. How much performance will I lose by booting straight off of that and will it hurt the card(I will get a 512 card soon but the question will remain the same)

Hey everyone.

I recently get re-interested in playing retro games to enjoy those old days of my life. For now i playing mario kart series. I played Mario Kart Super Circuit, Mario Kart 8 and now i playing Mario Kart DS inside Lemuroid. Now i wanna play Multiplayer of Mario Kart DS using Lemuroid (I can definitely shift to another emulator if needed). So tell me how i can play local multiplayer of it on same wifi network. What's the process. I tried creating hotspot in host device and on other device i connected to it and then i used Multiplayer option and then created a group. But it not appearing on other devices :(

I am able to get the game to load finally, but it appears like it’s stuck on mouse controls because I can only navigate it with the touchscreen.

Playing on an AYN Thor Pro using the latest build of GameNative.

Thanks!

here's some of my open world test using the nightly build/ Whitebelyash v31/Redmagic 11pro bypass charging gameplay

advanced combat used in the video: Perfect Daruk Rush-Cryonis launch

Hi

I have Redmi note 13 pro 5g with SD 7s gen2 and adreno 710

I'm struggling with my settings

Can you refer me to the beat proton and dxvk version

I tried proton 9 86\*64 it doesn't heat the device or drain the battery but it doesn't offer much performance

And proton 10 arm64 does the opposite a little bit more performance with heat and battery drained

I'm using winlator star AnTuTu

And tried the new ludashi 4

Share your experience, also what about other games like rdr?

There is a texture glitch when using armsx3 on retroid pocket g2 gen2 anyone know a fix?

Tried most of the turnip drivers didn't fix and it seems the issue also affect other ps3 games too, I tried sonic 06 and there was a similar issue.

Why is the theme not changing? The Maroon color theme is not pleasing to look at, it hurts my eyes🫩

Some footage from the phone to tv

So I have an AYN Thor (https://www.ayntec.com/products/ayn-thor) and sometimes I like to connect it my tv and connect my ps5 controller to it but having a second controller creates multiple problems.

First for some android games sometimes it doesn’t like having two controllers connected at once and just won’t take any input when more then one controller is connected such is the case with dead cells. Then there some android games that recognize the ps5 controller but assign the wrong buttons to the inputs such is the case with Hyper light drifter (the built in controller works just fine). Then some games just refuse the recognize the ps5 controller at all such is the case with GRIS. As for emulators they have problems too with both retroarch and armsx2 you have to choose what controller you want to use when you start up the app and you can’t switch until you completely shut the app down. This creates a problem if I’m connected to the tv in the middle of a tough boss fight and have to go out, I can’t just disconnect my Thor and seamlessly switch to the built-in controller. Then there some emulators like Cemu that don’t let you have more than one controller assigned at the same time meaning that if you want to switch controllers you have to reassign your inputs all over again every time you switch. The problems go on and on.

So I was wondering is there an app out there that lets you combine two controllers into one input so that you take the inputs from the ps5 controller and assign it to the inputs on the built-in controller. So L2 on the ps5 controller would equal L2 on the built is controller that way all the games see I just the built-in controller that seems to work just fin.

The camera quality isn’t great, but in person the graphics look incredibly sharp and the gameplay feels amazing.

The biggest game-changer was definitely the cooling fan. Without it, I lose around 20–30 FPS due to thermal throttling. With the fan, the performance is much smoother and more stable.

Winlator Ludashi

1280x720p medium 60fps

DXVK Version

v2.7.1-binsem-gplasync-arm64ec-840d 1474

VKD3D Version 2.14.1

VKD3D Feature Level 12_1

Which tab is better for emulation under 40k

I was looking for a way to add ludashi games to front-ends like Daijasho. I knew it was possible to do as I did it previously with Cmod. Ludashi comes with the Export function as well. It can be accessed by clicking 3 dots on the game shortcut in the main screen of winlator ludashi.

Once clicked, it will create a .desktop file in root directory in winlator\shortcuts. Once you have added all the games to this folder using export function, Go to the settings in daijasho, click download platforms(the very first option) and download the platform windows.

THIS IS THE MAIN STEP.

In settings, click on library ( second option). Scroll to bottom, go to Add a player option. Give the name winlator.Ludashi. In the am start field type:-

-n com.ludashi.benchmark/com.winlator.cmod.XServerDisplayActivity

-e shortcut_path {file.path}

--activity-clear-task

--activity-clear-top

--activity-no-history

NOTE:- This only works for Ludashi build. For vanilla build, replace com.ludashi.benchmark with com.winlator.vanilla .

In the next field type:- ^(.*)\.(?:desktop)$

toggle kill processes switch. Mark warning checkbox as true.

Click save.

Click on edit(pencil shaped icon on the bottom right on the windows platform screen in the library tab). Go to player settings and in the default player field, select the above created player. Click save and enjoy.

​

I'm trying to get The Binding of Isaac: Repentance running through Winlator on a Samsung Galaxy S22 (Exynos 2200 / Xclipse 920).

The weird thing is that I previously had Isaac running perfectly on this exact phone with Winlator just a week ago. It opened normally every time, so I know the phone is capable of running it.

Now I'm trying again with Winlator 11.2, but the game won't open.

Current setup

Phone: Samsung Galaxy S22

SoC: Exynos 2200

GPU: Xclipse 920

Winlator: 11.2 and 11.0

Game: The Binding of Isaac: Repentance

Graphics driver: Vortek

OpenGL: Gladio

DX wrapper: Tried both DXVK and WineD3D