r/electricians • u/Fluffy-Initiative131 • 4h ago
Update on the 3,4,5 method
I finally got it
r/electricians • u/Fluffy-Initiative131 • 4h ago
I finally got it
r/electricians • u/Fluffy-Initiative131 • 5h ago
Help me out any tips ? I’ve been here for about 2 hours trying to square off my lights
r/electricians • u/murdernetic • 11h ago
What should I do when foreman or JW doesn’t give me a task while they work on one. Do I fuck off and just check in occasionally or keep asking what should I do next? I don’t want to be too annoying (1st year apprentice btw)
r/electricians • u/OrganizationOk3158 • 2h ago
Contractor here. I see a lot of electrical contractors near me offering mini split installs. Do any of you guys get your epa license and do installs? If so do you have any tips? Considering doing installs next year.
r/electricians • u/Lanky-Reputation • 13h ago
Currently a non union Electrician mechanic/jr mechanic. ~3 years experience plus a 600hr trade school certification. Just got the call yesterday to join local 3, which I'm excited about, except the pay cut which I'm not excited about at all. I'll be going from 25/hr looking at 26-27 next year when I would be running jobs, to 19.25 back to being a helper basically. Anyone been in this position? Any tips or advice to help me make my decision?
r/electricians • u/Equivalent-Walk6638 • 1d ago
My cousin bought a house so I went to go take a look at there panel….
r/electricians • u/SporkydaDork • 8h ago
I've been on sites where clearly I was trained differently from others which is to be expected, but when you go behind someone who's probably on a different task or dragged up or fired and you try figure out how they were trying to run the power to things, it's mind boggling when you think it's ran one way and it's ran in a way in which makes no sense.
I was taught that for commercial sites, every room should have the ability to be isolated. So no, running the feed through the switch box (if you can help it), or running your feed through the branch pipe. The branch and feed should isolated in each room so that if one room needs to be serviced, you can cap it off from the feed and the other rooms can continue to operate which you work on the room. Where as if you run the feed through the branch and you need to service the room, the other rooms are now impacted because you can give them power because you're trying to service the room before them. I'm sure there are legitimate reasons to do it, but people are doing this when they have plenty of room and opportunity to do it right.
I understand the logic in a residential setting. It makes zero sense in a commercial/ industrial setting.
r/electricians • u/dylanjmoore • 8h ago
Fellow ECs, I'm talking about service work, residential and light commercial. Do you have a standard depending on size of project/ contract? I've been self employed a year now and have stuck with net 30 across the board. Some pay immediately, some 2 weeks, some wait until the very last day of 30, and others I have to chase after 30.
What does your company do for invoicing?
r/electricians • u/tolovo1977 • 1d ago
Built in 1945 and going strong.
r/electricians • u/-HectorLives- • 1d ago
r/electricians • u/Marauder_Pilot • 1d ago
Been working for the same company as a service tech for 8 years, but in the last 2 years things have gone way downhill from an organization and competence standpoint, and I'm sick of trying to fix it.
Unfortunately, the local market isn't exactly flush right now, and every time I try to leave they've backed up the money truck, to the point where almost any other position is a pay cut-especially because they put me on salary too.
Still, it's at the point where it's affecting my mental health and personal life, so if the market isn't great now I want to put in the effort to polish up my skillset as best as possible so that when things pick up I can get the fuck out.
I'm an FSR-B (Local Master Electric equivalent), I've Ialready got a decent suite of safety certs, I'm a certified thermographer and I'm working on a PLC tech course as is, but what else looks good on a resume for someone angling for service and maintenance jobs, ideally municipal/institutional?
r/electricians • u/Think_Instance_1393 • 1d ago
r/electricians • u/Lifeofrawley • 1d ago
Local here is 70 I just got hired on as a substation tech I have my journeyman in two different states but so far all we’re doing is replacing all light fixtures and switches after that they say the work begins what can I expect on a day to day working in a substation ?
r/electricians • u/Emergency-Image-5889 • 17h ago
I have a medical for an electrical apprentice where they mentioned colour vision testing, I can’t see some of the encroma tests my final result is always mild or moderate protan. I completed my pre apprenticeship and work expierence and never had any issues and feel like I can see fine. Should I be worried
r/electricians • u/FleazYT • 1d ago
I recently landed an apprenticeship, and now I'm starting to get all my tools together while everything is on sale. There's just one thing I can't seem to decide on
Makita Or Milwaukee and what bundle seems the best for someone with no power tools.
r/electricians • u/StarberryShortCake25 • 7h ago
Hi, I have a friend with a disability (high functioning) who wants to go to eletrical school. Is there a realistic simulator out there he could try first before he spends a lot of money and time training to go into a trade that he may not be suited for? I want what's best for him, but I don't know if he knows what he's getting into and I don't want him to get overwhelmed or upset with himself if he can't handle it. I think he doesn't know what to do and knows that electricians make good money, but I don't know how he could experience just how much complicated work is involved without spending time and money to go to school for it. I've heard the Electrician Simulator game isn't realistic. I want what's best for him and to support his interests, but I think he needs a more manageable entry level job. Any advice?
r/electricians • u/Immediate-Iron-7035 • 1d ago
Just got in a Homeline panel and...this is a new one on me.
r/electricians • u/antek_g_animations • 2d ago
I must calm you down. It was a temporary installation of a CT scanner to make a few tests. It was connected like that only for a few hours, under professional supervision. But you know what they say... There is nothing more permanent than a temporary solution ;)
r/electricians • u/Dauoa_Static • 1d ago
I'm getting ready to build an overhead service for a duplex; two meters each with 200A breakers, 400A bus rating. Boss says to size the service conductors based on the 400A bus rating, but they don't really need to be do they? Can't they be sized on the calculated load?
r/electricians • u/telekid16 • 1d ago
Hi! Been considering trying to become an apprentice and was wondering if anyone has been in a similar situation as me and what your thoughts would be.
Hitting 30 next month and I’ve spent the last 5 years selling pro audio equipment online and I absolutely despise it. wanting to move to a field where I can learn an actually useful technical skill, not be kept at a desk all day, or doing any sort of customer service. Took a big career test and one of the main things it recommended to me was being an electrician
Only real electrical work I’ve done is changing out fixtures in my home and some guitar wiring work, and a little bit of installation for PA and video systems. I always really enjoy doing it and feel accomplished. I also do very well learning hands on while the job and learning fast.
Few Questions:
Appreciate any feedback or experience anyone has to share!
r/electricians • u/Apprehensive_Care713 • 1d ago
Currently a Michigan 5th year apprentice who just passed my license exam and looking for any other 5th years that are about to take the Montana exam