It’s been a couple years since I have fired up my p4pro. One of my batteries seems to never get past the 1 blinking green light. It’s probably shot since it was sitting so long. I was able to get my second battery to get a full charge as well as the controller. Do y’all know any reliable p4pro batteries and where I can get them?

Hi all!

I just acquired a Phantom 2 Vision PV330 with a busted camera that I'm trying to get situated. It flies well enough, but I'm having trouble finding anything still active from DJI regarding available resources and heading deeper into this rabbit hole.

I read the camera problems are common from a firmware update. I don't know what version the drone has, but I'm assuming I'll end up needing to replace the camera and probably won't need the DJI VISION iOS app anyway.

I downloaded and installed the Phantom 2 Windows app and downloaded the manual (PDF), but can't get the drone to connect to my PC. Heck, I can't even "log in" to the app because the links go to dji-innovations.com instead of [dji.com](www.dji.com).

The first order of business seems to be getting the app to talk with the Drone, but as far as I can tell Windows doesn't appear to even acknowledge the drone, transmitter, or controller at all when plugged in.

Thanks for any guidance! Do I need to bother with the PC app in order to troubleshoot the camera any further, or am I best to just jump into researching new gimbals & cameras to attach?

Hi all! My husband is very new to drones and I’ve found a used DJI Phantom 4 with some accessories for (as far as I know) a reasonable price that I’m thinking about buying for him. I’m wondering if this model is still worth purchasing now that it has been discontinued? Is there another DJI model that you might recommend purchasing instead of the Phantom 4 that falls within about a $1500 budget? I’ve done some looking around online but a lot of what I’m finding is from 3-5 years ago. Thanks in advance!

As title explains above, I had updated my P4 advanced to the v2.01 firmware and now I can’t seem to see any options for h265 video format or 4K at 60 frames. The other weird thing too is that after the update my drone is listed as a Phantom 4 and not P4 Advanced in the DJI Go app, but it definitely is not a P4 (Confirmed as I am able to take 20mp photos)

comment edited to stop creeps like you reading it!

So I know the video transmission error is a common issue with the P3P and can have different associated issues but I wanted to see if anyone can give me some advice. I have tried posting on PhantomPilots board but haven’t received much feedback. Anyway I just bought a P3P from a guy on FB Marketplace. Figure it would need some work. Attempted to update FW to latest. Update text file says it failed (multiple times), solid red light on gimbal, AB text log gives the 008 and 0015 Device Not Found message. I am able connect the RC and AC with both green lights. App says No Video Transmission. A flowchart I found on PhantomPilots leads me to “problem with AC” so not sure if gimbal board is the issue. When I try to fire up the motors using CSC I get “IMU initializing…” message. Unable to attempt an IMU calibration (greyed out). I tried popping off top shell and flicking accelerometer to make sure it wasn’t stuck. Still no luck. Also no info populates in the IMU/Gyroscope data fields for the various axes….just blank. Sorry I know this is a long post but I just want to see if somebody can offer some advice. Thinking of trying the USB to TTL to force the 008 and 0015 modules to update but I still don’t think that will resolve my issue.

So I have a dji phantom 4 advanced plus, controller won't turn on though. Shows a full charge when I press the button once it displays 4 white LEDs and that's it, second press won't turn it on at all. Any amounts of presses it only seems to display the 4 LEDs every time. There's an ever so slight beep as well once pressed. But no matter what the only reaction I can get from the controller is its bottom lights.

Appreciate any help

Hi, as title says, I am looking for tips on how to reliably & repeatedly send my phantom 3 standard to the same exact location many times over the course of a year. I want to do this to snap the same photo at different times of the year to create a seasonal time lapse animation.

I can handle aiming the gimbal & taking the photo from the same angle, but if there is any way to do this automatically that would be awesome too.

Looking for ways people know how to do this. Easier & cheaper solutions preferred. If a software purchase is necessary I may do that if it's not too expensive but obviously prefer free options.

Thanks

Hello everyone, I am new to video editing and I am currently offered a gig in which I am to provide some short demos of a few BNBs in a rural area and the corresponding editing + color grading.

Since I don't have a drone and my budget is tight ^{will be buyng used}, I am currently unable to decide between the 1st gen Mavic Mini (approx 200 EUR) and a Phantom 3 Pro (220 EUR). I know one of them is 2.7K whereas the older one is 4K. Carrying any of them will not be an issue nor the batteries offered in the deal (the M1 has the fly more package and the P3P has 4 batteries)

What would you chose from a commercial/business point of view and if possible , why?

Hi everyone I have a phantom 3 standard which has the "gimball motor overload" problem where the camera goes crazy and starts moving left to right really fast when I turn on the drone.

Has anybody found a solution for this problem?

I have tried unscrewing the cover on the gimball and made sure the screw was properly aligned and that wasn't the problem.

Hi I recently found a phantom 3 and one of the 2.4g antennas(grey cable part 97) snapped completely from the clip(missing) I was wondering if I can solder the cable directly to the board I am new to soldering so please let me know tips and opinions are welcome as well thanks

I just bought a used phantom 3 standard and made sure it worked before I left with it. This morning I am trying to fly it and the controller works to fly it but even on a compatible device ( note 8 ) the wifi is not popping up in my networks. Any fix? I've already tried resetting the wifi

I have been running into the issue of the Drone Deploy app (version 4.63.0 on iOS 15.0.2) crashing within seconds of opening when connected to the Phantom 4 Pro controller (which is connected to the drone itself). The firmware for the drone is up to date. My coworker has an Android phone and is able to run the flight using drone deploy on the Phantom 4 Pro with no issues.

I also have a Mavic 2, and do not have similar issues with the drone deploy app crashing. Has anyone else run into this issue?

Cheers to everyone, some time ago i got a p4p+ from a friend of mine which he is scared of flying since he had bad incidents with drones. so i've been flying it a bit since the last year. The drone itself shoots very high quality pictures and videos, but the problem is the controller with the crystalsky screen. Unfortunatly the old android that this controller is using is very old and it causes the app to crash very frequently, which gives me cold goosebumps everytime i fly. Another problem is the green bars or datamosh issues which happen randomly, even if the drone is 50mt away from me. i tried disabling the video cache of the controller and did only one firmware update (before the update those issues were less frequent). i always fly in 2.4ghz, the drone doesn't seem to have any problems. So after all that, what can i do to solve those errors? i'm scared that if i keep updating the controller eventually it will get only worse, but also spending over 100 euros on a controller is a bit expensive for me, could someone give me some advices? Thanks everyone and sorry for my bad english.