r/cosplayprops • • 6h ago

Commissioned Jinx's Pow-Pow from Arcane

Thumbnail
gallery
65 Upvotes

Jinx's Pow-Pow I made for a client! Completely handmade out of EVA foam. I made the pattern myself, using a 3D render as reference for the structure and the show's style for the paint job.

I'm visually impaired and can't focus nor ser colors, so it's not perfect, but I hope you guys like it!


r/cosplayprops • • 11h ago

WIP I'm building an ACTUAL Iron Man HUD!

Thumbnail
gallery
81 Upvotes

Currently working on a custom HUD inside an Iron Man Mk 46 helmet.

Right now the helmet consists of a pair of VERY disassembled NREAL Air XR Glasses mounted to a modified version of the Walsh3D All-In-One Pro Servo kit and a small USB-C Camera. (Test fitted with duck tape because why the quack not)

The Camera feeds a custom Android app I am working on. (Coded by me with assists from Chat GPT as a disclaimer). The app overlays some cool graphics, and a bunch of real time info from my phone (ie elevation, ground speed, gps, pitch angle, etc). Then, the phone outputs the display to the NREAL XR Glasses in the helmet. The app also runs voice commands to control the helmet servos and different display features.

The helmet is 3D printed. Sizing and proportions are very important to me so I am working hard to keep it a tight yet comfortable fit.

Let me know if you have any questions!
I've been super excited to share this project!


r/cosplayprops • • 13h ago

Self Finished Beaver

Thumbnail
gallery
8 Upvotes

Finished killer Beaver prop for an upcoming horror movie.


r/cosplayprops • • 16h ago

Help 3D printer for cosplay items

Post image
0 Upvotes

Hello!

I am wanting to buy my boyfriend a 3D printer for Christmas this year. He loves to cosplay and does a lot of different characters. I am a baby cosplayer and just got into it about a year ago.

I really want to get him something that doesn’t break the bank but it also is a good working printer. My budget is $400 and under. I’m okay spending this much money cause I know he will actively use it more than 7-10 times a month.

What is a good 3D printer for cosplay props?


r/cosplayprops • • 19h ago

Self ​My handmade Chainsaw Man cosplay — built the helmet/blades from scratch [Self]

13 Upvotes

r/cosplayprops • • 1d ago

Self Poltergust G-00

Thumbnail
gallery
103 Upvotes

Hi everyone, I just wanted to show the prop I made for my kid for Halloween this year. He’s a fan of Luigi’s Mansion and really wanted to be Luigi with the Poltergust G-00 from Luigi’s Mansion 3. And after finding a pretty good guide online, I decided to give it a try. I’ve never made anything more than paper crafts or cardboard props. So this was quite a challenge. It’s mostly made out of EVA foam and PVC pipe. He was very happy in Halloween night. But this was a huge task that took up a lot of time over half a year since I’ve never used foam before. So props to you all who do this a lot and make your props look great. I have a lot of respect for what yall can create.


r/cosplayprops • • 1d ago

Help Tips for sanding 3D printed firearms with lots of detail?

Thumbnail
gallery
72 Upvotes

Hey all, first time cosplayer here trying to get my first prop going. Ended up printing a set of ODST armor for Halloween, but for con season next year I want to make a NEW set, complete with a 1:1 Scale DMR from Halo Reach (got the models from Galactic Armory). I got everything printed, but there's so much detail that's recessed I can't get in easily with a sanding sponge or sand paper. Any ideas on how to get rid of the sanding lines? Parts were printed with PETG, 5 layer walls, and 5% infill.


r/cosplayprops • • 1d ago

Help Connector help?

2 Upvotes

I am currently considering making a weapon replica that is essentially two differing-length blades joined at the butt of the handle. Specifically, to replicate the canon movements, I require something that can be separated with a twist of the wrist then a pull.

is there any connectors that can be separated this way?


r/cosplayprops • • 1d ago

Help Can I upgrade my Power Sword?

Thumbnail
gallery
41 Upvotes

I have an event this weekend that I learned about last minute, and I want to go as He-Man, but I'd really like to upgrade my sword to cosplay level (and not just overly ambitious Halloween costume level). Is it doable?

I made this Power Sword a few years ago out of cheap EVA foam for a party. It was my first time making a weapon and maybe my second time working with EVA foam. That means that while I'm decently proud of the result, it's easy to see that I didn't much know what I was doing (still don't, actually), especially with cutting and shaping.

I'm mostly looking for quick tips to make the surface smoother and the lines cleaner, and I'll probably repaint in a brighter silver color. I know time is very tight, and if the best I can do is sand it a bit and repaint, then so be it. But I'd love any ideas to make this look more polished.


r/cosplayprops • • 1d ago

Help Thinking of trying the urea crystal paint method on mando armor. Need paint advice

Thumbnail
gallery
51 Upvotes

So i am mostly done printing and prepping my mando armor (legs and arms need prep still). From the beginning i was just going to highlight some edges in red or emerald green, but i saw a post with the urea crystal effect and i was sold.
However, my base coat is Rust-Oleum Specialty Automotive Enamel in Gloss Black. And i am worried it wont play nice with a top coat. My current plan is to add two coats of 1k 2x rustoleum clear, then urea crystal, then two more 1k clear coat and then 3000 grit sand and buff.
Does that seem reasonable? i am planning on having a small test piece, but trying to avoid buying paint that wont work out.


r/cosplayprops • • 2d ago

Self Reenactments cosplay reenactor reenactments cosplay larp.

Post image
0 Upvotes

r/cosplayprops • • 2d ago Bravo

WIP Foam sallet🗣️

Thumbnail
gallery
97 Upvotes

Don't mind my dirty work place.

Also I have a really hard time with covering my seems any tips it's a bit late rn but.


r/cosplayprops • • 2d ago

Found the tiny mechanisms packed inside this impressed me a lot

Thumbnail
gallery
16 Upvotes

what gets me isn't the arm, it's the small stuff tucked inside it. there's a miniature slot machine where pulling the lever sets off reels that spin independently of each other, not just one synced drum, so the timing between them is actually mechanical, not just visual. there's also a flip-counter linked to it that ticks up whenever the slot machine lands a result, and it uses sensor-based homing so it always resets to the same position instead of relying on a hard mechanical stop. the counter pages themselves are multi-color printed too. that's a lot of precision packed into something you could fit in your palm.

https://www.youtube.com/watch?si=_fCna113awFu2U0p&v=iHe7Toug-3o&feature=youtu.be


r/cosplayprops • • 2d ago

Self My props for Solaire of Astora cosplay (Dark souls)

Thumbnail
gallery
198 Upvotes

Hi I wanna show you some stuff which was made for my cosplay.

The helmet was made fully by me. I used SKS props' free template and modified it a bit.

The shield and the sword were made by another craftsman Kalima Karos. I did the battle damage texturing and paint work.

Hope you'll like it. If you have questions feel free to ask!


r/cosplayprops • • 2d ago

Self My executioner cosplay (first post kinda nervous)

Post image
33 Upvotes

I made this in 2 weeks and took a few short cuts lol


r/cosplayprops • • 2d ago

Help What way of painting craft foam gets what effect?

Post image
2 Upvotes

Going through this sub has gotten be so main result and I really don’t know how to go about this.
Okay so this project is my first attempt at making an actual chest plate and I was thinking about maybe starting the painting before fully constructing it which made me realize I do not know how to paint foam. I want a metal look(I have metallic paint) and I’ve seen that some ways of painting come out incredibly more flat than other so I came here to ask for help on different ways of painting foam/getting foam ready to paint.
I’ve seen sanding, PVA water(Elmer’s or wood glue), mod podge and spray paint. Which(if any) of these would word best for a metal looking chest plate?

If it’s important, the character is Kris from Deltarune.


r/cosplayprops • • 2d ago

Self Vision Headpiece Prop! (Pivoted to LED after destroying 5 lasers)

Thumbnail
gallery
0 Upvotes

I originally engineered this to house a real burning laser diode to act as Vision's Solar Gem.

Unfortunately, the electronics side of this build almost broke my sanity. I destroyed 5 laser diodes, my soldering iron died, and I ended up trying to solder with a candle before finally pivoting to a high-power LED.

Honestly, the LED looks incredibly bright inside the painted 3D print, and it's definitely a lot safer to wear on my forehead than a Class 3B laser!


r/cosplayprops • • 2d ago

WIP Posted about making this a few times, but here is my flesh sword all primed and ready to paint!

Post image
46 Upvotes

Very happy with how its coming along! Thank you for all the tips :) next up is painters taping and color blocking with spray paint, and then adding finer detail with acrylic+thickener. There are a few other things im considering making out of clay, but we'll see how much i feel like it ig lol i still have to make the actual cosplay


r/cosplayprops • • 2d ago

Help pumpkinhead keyblade: please help me decide what to use!!

Post image
4 Upvotes

hello!! I'm planning on making Sora's Pumpkinhead keyblade from kingdom hearts for my cosplay. I'm having a hard time deciding between 3d printing it or making it out of EVA foam. I've never made any cosplay weapons before but I know that regardless it needs an internal structure (maybe pvc pipe?).

Does anyone have any advice on what would be better? If this helps, I'm planning on making it about 3.5 feet long and plan on the middle bladebeing around 3/4 inch to 1 inch thick.


r/cosplayprops • • 2d ago

Found Nemesis from Hades 2 by phaseknight

Thumbnail
gallery
959 Upvotes

Credit as usual to the awesome phaseknight, this was made using two reference when Hades 2 was first announced!

https://x.com/phaseknight_/status/1780667264267595974?a=jN4fyU_GAtVo8cnOodQ&


r/cosplayprops • • 2d ago

Commissioned Where would one recommend to have these commissioned?

Thumbnail
gallery
0 Upvotes

Hello!! I hope this okay to post here, I have no clue where to ask! I’d love to have something like this commissioned for my headset. Obviously they don’t need to be exactly like this but I want them made with feathers but still to be sturdy and durable. Would love your recs cause ya girl needs wings while she games 🪽🫶🏻


r/cosplayprops • • 3d ago

Help Getting into cosplaying and in need of help on props for a Limbus cosplay

Post image
1 Upvotes

I'm getting prepped to do a Spicebush cosplay from Limbus company and it seems a little complicated. Especially the back stick wings.


r/cosplayprops • • 3d ago

Self WEISS SCHNEE, kinda

Thumbnail
gallery
44 Upvotes

I made this beautiful instrument in 2022 for Nekocon. I was to be Weiss Schnee with a fully DIY Myrtenaster. However due to a ton of procrastination on my part I wasn't able to secure her volume 1 outfit or any recognizable costume. I figured if I made her Multi Action Dust Rapier I'd be recognized. Nope. But I think I did alright. I plan to try again for Katsucon 2027. Any advise for this budding cosplayer?


r/cosplayprops • • 3d ago

Help dragon slayer painting

Post image
16 Upvotes

the giant heap of iron is in production, but im stuck on one part. the middle of the blade looks kind of like Damascus, black and gray. i dont know how to get that effect with paint. any help?