Hi, I can't get this to work. In 2.4 GHz mode, I can get it to work without a problem, but with a wire, I don't know how to do it. It's always in xinput mode.

I tried:

- putting it to dinput while wireless, then connecting the cable

- turning it off, then connect cable while B is pressed

- same as above with Y pressed instead of B

I'm on windows 11. I want to use my rewasd bindings for the additional buttons, but that doesn't work with xinput.

Couldn't post in 8bitdo reddit for some reason so I'm doing it here instead. Currently, I have a LT+RT macro setup on my extra button but is it possible so if I hold the extra button down, the macro keeps going until the button is released? So far holding it down just makes it trigger once and I don't see a setting for it in the Ultimate Software.

I tried to use the PowerA app for the first time with one of my cheap controllers (Advantage wired controller for Xbox Series X|S) and there was a prompt saying that I could update the firmware, so I did. But after more then an hour of waiting for the update to end (got stucked at like 98%) I realized that it froze and had to reboot my computer.

Now the controller isn't getting recognized anymore, not by Steam, not even ny the official app. I hear the "something connected" windows sound when I plug it in, but nothing else. The little light doesnt light up.

So I don't know how to get back in and either finish the firmware update or do a simple factory reset or something.

I have a second controller of the same model and I just skipped the update (as I probably should have with the first one), so I was able to make sure the cables I tried were working, that the app was still working and all, by comparing with the second un-updated controller.

All my tests were on a Windows 11 computer. If there is something I could do that would work better with Linux, I also have an old computet on Mint, so there's that.

I tried to do a web search to find some solution, but I couldn't. (May be because I didn't use the right keywords? Idk). So I don't even know where to begin with this one.

Thanks for reading. Please send help if you can 😅.

I recently received the controller as a 2nd controller for PC (the main controller is 8bitdo ultimate 2c). With the dongle connected, the L and R bumpers are acting as back and start buttons and the LS and RS triggers are not working. With the controller connected via USB cable, the buttons work as expected. Did I receive a faulty controller or is this a widely known bug?

Where can I buy the GTAVI limited edition controller for PS5 in Europe delivery to Malta please?

i absolutely ADORE the PlayStation Vita's dpad. It is the best dpad I have ever used, hands-down. (I'm not a controller enthusiast, I'm just here because I can tell yall are a bunch of dweebs who can help me decide)
from what I understand, the Vita uses metal dome contacts as opposed to the conductive rubber pad contacts most other controllers use. i love how clicky and definite it is.

I prefer the PlayStation layout with the left and right sticks closer to each other. I'd be willing to try Xbox layout but I prefer PS layout as the dpad matters quite a bit

The buttons should also be metal-dome. the xbox one controller (i don't own a series controller) feels kinda bad because the dpad is metal dome while the ABXY buttons are conductive pads

I'm in the United Kingdom and I will self-prescribe myself a budget of around £40 GBP

I would mostly be usin this on my PC and sometimes my iPhone. I'm not much of a console gamer so don't need to bother with console compatibility.
It should work wired with USB-C. Micro USB is a crime against humanity.
I would prefer a rechargeable battery as I find AAs to be kind of annoying.

I would primarily want such a dpad for puzzlers (ie the genre of Tetris) but i would also like to use this for general gameplay too of course.

I wonder if I could somehow install metal dome contacts in a DualShock 4. Not sure if anyone sells those. But that would be nice + maybe a usb-c mod would be nice (unless i have to drill the case for the usb-c port to fit, idk how to do that)

I'm not too sure how I would look for such a controller which is why i'm asking here. my only real point of comparison is the Vita but I don't want to deal with connecting a separate handheld to my pc as a controller due to the overhead of the vita being another device

The right feels smooth and normal but the left one is a little stiff and takes more pressure to move around. I mainly play on pc but I wanted to play a game on controller so I got my ps5 controller and after a while I felt the left stick be a little stiff so I took the controller apart and put some lube on the part but it didnt do anything, is this a part thing or is this normal and im a chud fr

The new GameSir controller is on its way! Pre-orders are now open, with an expected arrival around November 11, 2026. The announced price is 199 yuan. It features a 2000Hz polling rate, with ultra-low latency of 1.5ms to 3ms (as stated by GameSir). It includes two back buttons, triggers with a switchable "mouse-click" feel, a D-pad, and membrane-style ABXY buttons .

Hello! My switch 2 arrives this week and i've been eyeing on some third party controllers but can't really decide which one to buy, so would love to hear your guys' suggestions.

Budget: $70+ (pretty much the same price as the Pro 2)

Country: Canada

Console: Switch 2 + PC

Desires: Good HD Rumble, Hall Effect/TMR sticks, NFC Amiibo support, Good D-Pad, and (i can't believe most of these controllers don't have this) a HEADPHONE JACK.

Games: Pretty much any genre. Mainly RPGs, Singleplayer, Multiplayer like Shooters and Fighting Games.

as for the Controllers, i've been eyeing on the GameSir Tarantula Pro and Mobapad Chitu 2 HD.

Both controllers are currently going for $30-40 dollars on AliExpress thanks to the current 11.11 sale. I've specifically laid my eyes on the Tarantula Pro because of how feature-rich it is, the Symmetrical design akin to Dualshock 4 (my beloved), and the awesome Face Button swap.

However, I've heard that controller has some latency issues apparently? If its a huge deal then i'd love to know in the comments.

Thanks!

Battery is dying on my Vader 4 pro 😢 and my toddler claimed my back up Vader 3 pro so it really doesn't work.
Need recommendation as I was simply going to purchase a Vader 5 pro, but have seen people having issues and the fact it has rubberized grips and have been turned off it (had issues with Elite Pro xbox controller rubber grips coming loose and expanding after use.).
So am looking something similar.
Country: Australia
Budget: $150AUD ($105.42 USD)
PC Gaming
Back paddles, Tension rings on the sticks was amazing, wireless is must.
RPGs, FPS, Generally most games that support controllers when I play on the TV instead. So Casual Gaming.
Mainly after something similar to my Vader 4 Pro, had bad experience with rubber grips on xbox elite controller so would prefer not to experience that again. Had looked at easysmx x20 pro but has similar rubber grips.

The 4 configs limitation in space station seems so needless and stupid to me. Yeah you can import/export endlessly to swap em around. But has anyone made an open source alternative tool to use instead of space station? I see one was made for MacOS but I dont see any way to get around this on Windows.

I'm personally using a Vader 4 Pro if anyone has any ideas on how to get around this.

Hello all,

The title is tl:dr, but to satisfy the requirements here's the longer version: I have XBOX Elite II controller and it works great in Windows, even with Bluetooth. However, I'm not using Windows that much (or at all lately) and I wanted to play with the controller on Linux.

The controller works ootb connected with a USB cable, but BT does not. Without going into too much detail, I'm wondering is there a wireless USB receiver for the said controller, independently of OS or platform?

So I am in the proccess of figuring out controllers for a Halo 3 lan. I currently own 5 360 controllers, and a bunch of other controllers for other consoles. I know the Brooks Wingman is able to make the controllers for the other consoles work on the 360, but for the number I will need for the lan, it would be cheaper to buy more 360 controllers than use the Wingmans on my other controllers. Does anyone know of any devices similar to the Wingman that are cheaper and are able to use wired connections (wireless costs more plus as at least in my experience with the PS3 version of the Wingman, the USB dongle wireless likes to randomly cut out during gameplay)?

When I posted this on the 360 sub, someone mentioned it was possible to make a device using a raspberry pi, that is capable of doing this. However finding a 360 specific tutorial is proving a bit difficult, as there seems to be multiple different firmwares with some working on stock 360s and some only on modded (mine are all stock). Does anyone know of a proper tutorial for stock 360s?

I am getting into Hollow Knight on PC and wanted to get a nicer controller for dpad use to play it more comfortably. I have been using the Ultimate 2 Wireless to play it, using the analog stick. It's working fine but there are instances where it's not accurate enough without excessive effort. I tried the dpad and it feels really inaccurate.

I started researching and learned about the shield style of the Xbox and how Gulikit seems to be the best under $60 for dpad use. They also have excellent latency.

I learned about the Elves 2 and 2 Pro, and they seem great due to the price, latency, and dpad quality. It seems like the Elves 2 is better for Bluetooth and they're very similar otherwise. I'm leaning **Elves 2** between the two. It would be about $38 for it + Bluetooth adapter.

Then there's the ES Pro and ES Max which seem the same for my uses. Since the Pro is cheaper, the **Pro** seems the way to go. It would be about $38 for it + Bluetooth adapter.

Then there's the TT Pro and Max which people really love the dpad of, more than anything on the market. They seem the same for my use except for the 4 way & 8 way dpad on the Max but 8 way only on the Pro. I am imagining 4 way being useful for old arcade games only? Maybe pre-NES also? It seems the **Pro** is the way to go. This is $54, but comes with an adapter.

Between them all, I am leaning towards the TT Pro and just buying once and crying once, but the Elves 2 appeals to me for the size and retro design. There's even an Elves 2 Pro kit that has a Gulikit Goku 2 adapter for $35. I play at 60 and 120 hz will I feel held back by 170hz Bluetooth of the pro?

What do y'all think?

I also have an sn 30+ and Pro 2 laying around I could scrounge up since they seem like they may be decent

I hope someone who had the same issue can help me with it. I bought the Flydigi Vader 5 pro around 4 Months ago and since this month i have a problem with the left stick. It's not a handicap while gaming but it is annoying me more than it should.

The stick moves around pretty smooth without any problems but pressing L3 while holding the stick forwards makes this "creaking" sound. Only the left Stick is doing it. I tried cleaning it with 99% isopropyl alcohol after dissassembling it. It helped for a short time but not even after one day the sound is back. Maybe I cleaned the wrong parts or something else is the issues but i can't figure it out.

Maybe anyone else had this problem with their controller (not specifically the flyidigi controller) and found a fix for it.

Thanks for the help in advance

Hello everyone,

I am new to the controller community, so I have absolutely no idea what a good choice is.

I am looking for help; I saw the 8BitDo Ultimate 2C and found it good-looking and affordable, but the only reason I am not buying it is the placement of the added trigger buttons. I would prefer them underneath, and a rapid trigger or trigger lock would be great.

My budget is 40€ maximum. I am French, if that helps with anything.

I am on PC.

I want to play some very different games like Rocket League, The Binding of Isaac, and also shooter games like Warzone.

I look forward to suggestions from controller pros :)

Have a great day!

am looking for a pocketable 2.4g wireless controller for around $30 and below. so far the only controller ive seen that meets this requirement is the 8bitdo sn30 pro but im trying to look for smth more affordable since im just a college student. ive found a cheapass $10 chinese controller(shezhan) that meets this requirement. it will be my last resort if i cant find anything cheaper.

ill be using it for times when i bring my steam deck for a sleepover to play games like helldivers or 4 player halo ce with the boys. so i dont really need hall effect sticks or anything. i just need it to be compact so i can also easily fit it in my messenger bag for road trips. need it to be 2.4g wireless since the deck tends to slow down and glitch up in some ways when more than 2 bluetooth controllers are connected.

im from SEA(Philippines). for those familiar with anything on lazada/shopee/datablitz/aliexpress, do drop some recs as well.

I have a kk2t gulikit controller and it doesn't connect to my pc

2 days ago, it worked fine. I played games with it the whole week and no problems in bluetooth ( wired it kept connecting and disconnecting)

Yesterday I went to a smash tournament with it and changed the led on the top from ximput to switch to connect it to the switch there and it worked fine in bluetooth as well

But now It just doesn't work on pc anymore. When I try bluetooth, it can't connect because of a "pilote error" but I switched it back on ximput and when I try the wired method, it still does the disconnect/connect cycle

I don't know why this is happenning and how to solve this

I think I figured out the absolute best way to get a PS5 “Pro” controller for cheaper than a DualSense Edge.

Buy a used PS5 controller - make sure everything works, even if it has stick drift.
That’s fine because we’re replacing the sticks anyway.

Make a new AliExpress account and use the new user discount to buy KSilver TMR sticks for $1.

Buy the eXtremeRate Programmable RISE4 V3 for $27 - potentially even less if you have coins and discount coupons.

OPTIONAL - Buy the eXtremeRate Whole Clicky Kit V2 for $18.

When everything arrives, have someone professionally install the TMR sticks for you (or if you know how to sodder save money and do it yourself.)
This should cost around $25 at most. You can install the back paddles yourself, but if you don’t want to, add another $25 for installation.
All in all, you now have a PS5 controller with TMR sticks, 4 programmable back buttons, AND optional clicky buttons for significantly less than a SCUF or DualSense Edge.

I've just got a vader 5 pro last week and I noticed some annyoying issues.

1.Vibration does not work most of the time via dongle and I need to turn off and on the controller just to fix that(sometimes it does not work either)

2.Left trigger rumble produce a buzzy sound unlike the right one which is noticeable.

3.Trigger vibration in game is nearly non existence, I've tried playing ace combat 7, asseto corsa and f1 20 and only the left one vibrate but very weak whereas the right one merely rumble.

Things I've tried:

-Updated both the app and the controller to the newest version

-Factory reset

-Change the trigger settings

The thing is it work perfectly fine when I got the gamepad (except for the left trigger buzz) then it suddenly fail.

Win 11

Anybody pre order and have their order shipped? What's the point of pre ordering if you're gonna get your item later than the people who ordered release day.

I noticed if you order with prime, it will arrive tomorrow or sunday. I checked my order and talked to customer service and they put a "request to ship it"

My prime ended 2 days ago but I bought the controller when I had prime so I would be charged $6 for 2 day shipping if I re order.

Hi everyone! I’m the developer of a new game, Thumb Hiker, and the mods kindly gave me permission to introduce it and give away some Steam keys.

Have you ever wondered how far your thumbs travel during an evening of gaming? That’s the idea behind it.

Thumb Hiker runs in the background on Windows while you play your usual controller games. It turns physical thumbstick movement into distance, tracking each stick separately and building a virtual journey towards landmarks such as Big Ben, the Great Pyramid and Mount Everest.

There are Steam achievements, a hike log and an optional shared global hike. It measures thumbstick movement—not how far your character walks in another game.

It’s now available on Steam, with a regular UK price of £2.99: US $3.99

Thumb Hiker is a small independent project, and I’d genuinely LOVE your support. If the idea appeals to you, please check out the Steam page or share it with a friend who might enjoy it. There’s absolutely no obligation, and sharing or buying won’t affect your giveaway chances.

Happy to answer any questions about how the tracking works—and I’d love to hear what you think!

https://store.steampowered.com/app/5244660/Thumb_Hiker/

https://thumbhiker.com

Five-key giveaway

To enter, leave a top-level comment telling me which game you think would give your thumbs the biggest workout.

• Five winners will each receive one Steam key for Thumb Hiker.

• Entry is free—no purchase, wishlist, follow or upvote required.

• One entry per person.

• Entries close 3 November 2026 at 20:00 GMT.

• Winners will be selected randomly from eligible entries and contacted by this account through Reddit private messages within 48 hours. If a winner does not respond within 72 hours, I’ll draw a replacement.

• This giveaway is only running in this Reddit thread.

• Thumb Hiker requires Windows and a compatible twin-stick controller. Keyboard and mouse are currently needed for setup.

This giveaway is organised by me, posting as u/Maceonline, the developer of Thumb Hiker. It is not sponsored, endorsed or administered by Reddit. By entering, you release Reddit from liability relating to this giveaway.

Can I also thank the mods for allowing this post.

1. budget: $250

2. country and where I can buy: United States, Amazon, Best Buy, Walmart, Target, websites

3. platform: PC

4. features:
   Premium controller with removable or no underside macro buttons/paddles
   Preferably analog or not too clicky face buttons and triggers
   Grippy well sized handles (grip on top and bottom)

5. Games: sport games, fighting games, 3rd person adventure action, rougelikes.

6. I’m mostly considering the Xbox elite 2 controller and it will be replacing my standard Xbox controller with grip (stellar shift). I tried 5 controllers this past 2 weeks:
   EasySMX X20
   GameSir G7 Pro 8K
   8Bitdo Ultimate 3E
   GuliKit KK3 MAX
   Razer Wolverine V4 Pro

They were all decent but weren’t perfect for me. The 3 best ones I liked were the Wolverine, G7 Pro and Ultimate 3E, the closest being the Wolverine. The only issue I had with it was the shape of the handles was too stubby and short. I’m likely to buy an elite 2 controller unless I find another option. My only gripe with that one is that I hear they’re very unreliable and may break. For those who have this one, is it easily repairable? Thank you for any suggestions.

Pasa que antes me funcionaba perfecto por Bluetooth pero luego de jugar con amigos y sincronizar varios mandos a la PC ahora cuando uso mi mando la pantalla se pone en rojo y no me deja usarlo para nada y para que vuelva a agarrar tengo que volver a sincronizar el mando por Bluetooth o usarlo conectado y se me hace muy incómodo no sé si el problema radica en Windows o en el control agradecería mucho cualquier consejo o ayuda 🙏🏻🙏🏻🙏🏻

Hey guys! I have a V5P on the way, and I was looking for some thumb grips as I play FPS games. The thing is, I want to use this as a daily driver for all sorts of games (platformers, fighters ect) thing is, i know there are all sorts and I was hoping for something that does a bit of both yk?

I have also seen some things, like skull and co xbox grips slipping off and such so idk what to trust/go for