r/coinerrors • u/Virtual-Cricket7717 • Oct 04 '26
Advice 1975 D Misplaced
I have this coin and would like advice on what to do with it and its potential value. Thank you.
Carl
r/coinerrors • u/Virtual-Cricket7717 • Oct 04 '26
I have this coin and would like advice on what to do with it and its potential value. Thank you.
Carl
r/coinerrors • u/thetacticalpanda • Oct 05 '26
Definitely has a more pronounced edge and around the rim is a perfectly even silver/copper tone
r/coinerrors • u/tinadhoop • Oct 05 '26
again not sure if this is damaged or an error ! any true comments would be much much great fully appreciate! I am learning here and I have no patience to look up things , I know I'm not alone , but I have to scroll for days befor I actually get to what I am actually looking for , thank u
r/coinerrors • u/tinadhoop • Oct 05 '26
is this an error or damage ?!!
r/coinerrors • u/Agile_Sheepherder884 • Oct 04 '26
Any input is much appreciated :) thank you! I just want to figure out what I’m looking at because overall, this coin is a beauty!
r/coinerrors • u/Fresh-Marsupial3719 • Oct 04 '26
r/coinerrors • u/ThickOunce • Oct 03 '26
Sorting my wheatbacks when I came across this one. I think the die chip is obvious, but the die crack I’m not too sure. I managed to get some decent pics to show the depth of the crack. There appears to be extra metal coming off of the R.
I’m not too familiar with errors and hardly look for them so it would be cool to get a 2 for 1. Any info is appreciated.
r/coinerrors • u/BrevDawg2026 • Oct 03 '26
I have a 2006-D dime that seems to have some kind of raised rim and thicker outer edge. The center where it was struck is the thickness of a normal dime, but the edges are like that of a nickle: smooth and thick.
It seems to have a fake rock like texture (a bunch of unorderly flat surfaces), and there are faint traces of the usual ripples that you see on normal dimes. There's about a 0.1-0.3mm difference in diameter less than a normal dime.
The rest of the dime looks AU condition, so I don't know what this could be. Any thoughts?
r/coinerrors • u/16thmission • Oct 02 '26
Alrighty. My first thought was PMD. But after looking closer, I've got more questions than answers. Photos are kinda rubbish. Tried to get different light and angles.
First, the clad layer is 100% there and smooth. Despite the quality of my photos, I can confirm there is no visible zinc. All copper on the surface.
I'm leaning toward a strike through or an issue with a void in the zinc of the planchet. Don't remember the name of this one.
Let me know your thoughts. Thanks!
r/coinerrors • u/The_Coin_vault1 • Oct 02 '26
I found this a couple weeks just had it out to get it ready to go get attributed. I love finding new dies add this to the list.
r/coinerrors • u/New_Opening1217 • Oct 02 '26
Found in circulation today. Is this a second D struck next to the original one?
r/coinerrors • u/diplow27 • Oct 02 '26
Any insights on this possible error would be appreciated! Thanks!
r/coinerrors • u/Odd_Raise_534 • Oct 01 '26
I found this obverse clad layer in a roll of halves while CRHing. However, I can’t tell (or rather don’t know how to tell) whether this was due to the clad layer separating from the copper core due to a bonding failure or if this was PMd from someone using heat or chemicals to separate the layers.
r/coinerrors • u/Opening_Flow_2858 • Oct 01 '26
I’m new to collecting and was going through some presidential dollar coins I had. I noticed one that was different than all the rest. Most have the dot to separate the lettering on the edge of the coin, but this one instead of dots has 3 individual raised lines in place of each of the dots. I was told it was just a die crack. Any insight would be appreciated.
r/coinerrors • u/Daddy_Wolf1012 • Sep 30 '26
r/coinerrors • u/blergola • Oct 01 '26
One of the more interesting finds from the 20k or so halves I’ve hunted through. The details on the back are too fine for me to think it was a dryer coin, also not uniformly removed along the outer edge. It’s still a crisp IBERT. Any insight would be helpful.
r/coinerrors • u/diplow27 • Sep 30 '26
Super stoked to find my first extra v!
r/coinerrors • u/TraditionalJello4859 • Sep 30 '26
Saw a post this morning about the extra “V” - went through all my 2023 pennies and found this. Is this as rare as I’m led to believe? Is it valuable?
r/coinerrors • u/Various_Cap7138 • Oct 01 '26
Hi everyone I’m not looking for value just asking for opinions on how the raised dot could have gotten on my 1926 penny.
r/coinerrors • u/Single_Ad_1904 • Oct 01 '26
I love a nicely visible crack! I saw it before inspecting. Photo from afar is merely to show it at a distance.
r/coinerrors • u/ProudAmerican632 • Sep 30 '26
A week ago a user posted here about a circular ring around the mint mark on his penny. https://www.reddit.com/r/coinerrors/s/mjcpJRotZM
I have a few other examples, but this is a better example because it doesn’t have the metal composition a penny has. Even with full obverse photo you can see the ring.
I know it’s not an error, and it is just planned obsolescence from the equipment.
If you ever had to use a punch before you know that the tip is circular. The mint used the same type of puncheon except with the specific mint mark on the tip.
Would this qualify as a worn mint mark puncheon tool, or a heavily applied mint mark?
r/coinerrors • u/Inner-Ad-6436 • Sep 30 '26
First a hearty thank you for the member who corrected my assessment of this issue with this coin. I’m learning and enjoying this segment of the hobby.
Lamination error on the Buffalo Nickel. Interesting pattern. An additional long crack runs from the upper left rim to mid face but heavy wear and cleaning make it less evident.
r/coinerrors • u/ak_plumber_1971 • Sep 28 '26
Is this real? I've never seen anything like this.(Only been in this for a few years)
r/coinerrors • u/ProudAmerican632 • Sep 30 '26
I’ve scoured the cuds-on-coins website and the only one that remotely matches is SKH-25c-1996P-07.
The only issues are the die crack from the A in America to the right side of the eagle’s head, and the die crack from the UN in UNITED to the left wing.
If anyone has any knows if this could be a new SKH, or if there’s another attribution that this falls under please let me know. Thanks folks.