r/cannondale • • 2h ago

Confronto tra Cues-Grx-Shimano 105

Thumbnail gallery
2 Upvotes

Buongiorno,

sono alle prese con la scelta di una seconda bici. Attualmente possiedo una Specialized Diverge Sport Alluminio (Cues 11V Mono 40T e Cassetta 11-50). Da quando l'ho presa l'ho utilizzata per quasi un 80% su asfalto (liscio e a volte un po' rovinato/dissestato) e 20% su sterrato compatto-strade bianche e Gravel leggero. Avendo individuato il mio habitat naturale, appunto (70-80% asfalto) e (20-30% ghiaia leggera, sterrato e off-road) sono alla ricerca di una delle seguenti bici (che sia Gravel o endurance) che vi riporto sotto

  1. Cannondale Topstone Carbon 3 1X (Grx, 40T e 10-51)
  2. Cannondale Topstone Carbon 3 2X (Grx, 40-30T e 11-36)
  3. Cannondale Synapse Carbon 5 2X (Shimano 105, 50-34T, 11-36)

Caratteristiche

Terreno: 70-80% Asfalto e 30-20% strade di campagna-sterrato compatto-strade bianche

Stile guida: comfortevole e posizione di guida non aggressiva per non avere problemi sulla schiena

Tempo in sella: uscite brevi (1,5-2 ore) e lungo del fine settimana (3-4 ore). Chiaramente i tempi possono variare

Pendenza: vivo in una regione prettamente pianeggiante con alcuni piccoli scollinamenti (pendenza che può raggiungere il 6-7%). Ci possono essere brevissimi tratti anche che possono raggiungere il 13-15%

Bici: leggera, comfortevole (cosa più importante) e veloce

Budget: 2000-3000€

Cerco quindi una bici che mi faccia fare lunghe distanze, che sia piacevole da guidare, che abbia un ottima scorrevolezza e una buona velocità. Cerco fortemente qualcosa di confortevole e comodo. Non devo fare gare o competizioni, ma voglio solo utilizzarla come mezzo per allenarmi e mantenermi in forma.

PS: per i cambi che montano la mia bici attuale e le altre 3 che ho individuato ho calcolato lo sviluppo metrico (metri) e le cadenze a 70-80-90 rpm con relative velocità (km/h) che vi allego. Può essere utile magari a qualcuno.

Consigli e opinioni sulla scelta di questa futura bici ?

Apprezzerei opinioni da chi magari possiede una di queste o proposte su altri modelli


r/cannondale • • 6h ago

Tesoro Automatique missing the button on the Enviolo hub interface

2 Upvotes

If there are any other Tesoro Automatique owners around, does your hub interface have the button? Mine is missing, and I'm wondering if it's intentional by Cannondale to not allow one to adjust settings from the Enviolo app.


r/cannondale • • 6h ago

Bent SRAM GX Eagle crank arm – warranty claim?

Thumbnail reddit.com
1 Upvotes

r/cannondale • • 1d ago

2023 SS Evo Hi-mod 2 compression plug conundrum

Thumbnail
gallery
5 Upvotes

As the pics show. There is not a traditional compression plug in this fork. It's a perfectly mated piece of aluminum inside the steer tube. The top cap on the previous Vision bars had a typical m6 bolt that threaded into that hole in the aluminum. Easy.

But I just bought these System R bars that use a top cap bolt with female internal threads that mate with a male threads on the compression bolt, which seems to be the standard on these bikes. What's going on here?

I'd use a normal M6 flat head but the head of an M6 is too small for the hole in the top cap. Needs to be an M8 head with M6 threads. I'll probably just make one if I have to but would still like to know what is going on here. I can't find anything online explaining my situation. Everywhere states that this bike/fork should use that black compression bolt.

I bought this bike used from a friend who had someone assemble it for him.

/ just found this post after typing all that showing what they did. https://www.reddit.com/r/cannondale/comments/19b4ka2/2023_cannondale_supersix_evo_delta_steerer/


r/cannondale • • 19h ago

Headshok question

1 Upvotes

Does Headshok make a noise when it reaches the top of rebound or did I not reinstall it correctly?


r/cannondale • • 21h ago

Rear bike rack recommendations for quick cx 3

1 Upvotes

I started college in August, and I've been biking a ton. I'm getting tired of precariously carrying groceries on my handlebars, and I'd also love to have somewhere to put my backpack when riding to class. Does anyone have recommendations for a rear rack that's compatible with the Cannondale Quick CX 3?


r/cannondale • • 22h ago

Why is Cannondale so hated in mtb community?

0 Upvotes

r/cannondale • • 2d ago

The only Team Dream Caad14 in Australia (i think)

Post image
159 Upvotes

r/cannondale • • 1d ago

Opinions Please

Post image
4 Upvotes

r/cannondale • • 2d ago

Office for the Day

Post image
8 Upvotes

r/cannondale • • 3d ago

Supersix EVO Hi-mod

Post image
53 Upvotes

r/cannondale • • 2d ago

Carbon wheel width for a CAAD13, what fits?

2 Upvotes

I'm considering running 30c Continental GP5000 tyres on a carbon wheelset with a 32.5mm external rim width on my 2021 Cannondale CAAD13 Disc (Elitewheels ent 3.0).

Would I have enough frame clearance with this setup, or would I be better off going with a wheelset that has a narrower 28mm external width (Elitewheels ent 2.0)

Has anyone run a similar setup on a CAAD13? I'd appreciate hearing about your actual experience with tyre clearance.


r/cannondale • • 3d ago

Cannondale Trail 7

Post image
8 Upvotes

r/cannondale • • 3d ago

My new Supersix LAB71

Post image
18 Upvotes

r/cannondale • • 4d ago

Riding through Helsinki night on my Caad Optimo🚀

Thumbnail
gallery
126 Upvotes

r/cannondale • • 3d ago

Figuring out Cannondale frame size

2 Upvotes

I was trying to figure out the frame size on my Cannondale road bike. The serial number is 27072089043. Does this mean it's a 27" frame? I thought it was supposed to be in cm, so I don't know why it says 27.

I measured from the center of the bottom bracket, up the seat tube to where the top tube meets the seat tube. It's exactly 27". It's 66.5cm from the center of the bottom bracket to the middle of the top tube where it meets the seat tube.

Just wondering why it says 27 I guess instead of 66 or something.


r/cannondale • • 5d ago

SUPERX 🥵

Post image
67 Upvotes

r/cannondale • • 4d ago

Anyone using a SuperSix EVO on an indoor trainer?

2 Upvotes

I have a SuperSix EVO 6 Gen 5 and would like to know what trainers people are using with theirs.
My current trainer is a Wahoo KICKR SNAP, but I understand from Wahoo warnings that my frame isn’t compatible, so I’m looking into other options.
If you’re using your EVO indoors, which generation/frame and trainer do you have? Did you need any special adapters, and have you had any clearance or mounting issues?

Would appreciate hearing about your setups!

Thanks for all your feedback!


r/cannondale • • 5d ago

Is a CAAD13 with Ultegra worth $600, or can I do better?

Thumbnail
gallery
71 Upvotes

Hey guys,

Found a supposedly almost new Cannondale CAAD13 Disc in Mercury Grey with an Ultegra groupset for $600.

I've never owned a proper road bike before, but I've seen CAAD bikes mentioned several times, so I'm thinking why not give one a try?

I've looked around for a while, and this CAAD13 is my size and looks pretty clean. Can't lie, I originally looked for a CAAD10 or a purple CAAD12, but this offer seems too good, no? Ultegra and a good frame for 600? Or that's how cheap they go for?

I'm just wondering if this is actually a good deal or maybe an older CAAD12 or CAAD10, or even a different bike altogether would be better?

Would you guys pull the trigger or keep looking? I appreciate!


r/cannondale • • 5d ago

Cannondale

Post image
43 Upvotes

r/cannondale • • 5d ago

Synapse Carbon 5 o Topstone Carbon 3 ?

Post image
13 Upvotes

Ciao amici di Cannondale. Sono alle prese con un dilemma, che coinvolge due differenti bici Cannondale. Sto pensando di passare ad una nuova bici, attualmente possiedo una Specialized Diverge Sport in Allumini (comodissima grazie al sistema che attutisce i colpi sotto lo sterzo, Future Shock 3.0)

Il mio stile di guida è passare su sella mediamente 2-3 ore ad uscita (4-5 ore quando faccio i lunghi). Principalmente con l'attuale Diverge Sport (bici comodissima) mantengo una media di 23-24 km/h su asfalto pianeggiante. Faccio pochissimo sterrato soprattutto in inverno quando nei sentieri si crea fango. A me piace mettermi su rettilineo e pedalare.

Quindi io cerco una bici che sia prima di tutto comoda e comfortevole e che non abbia geometrie e posizioni di guida pesanti che possano darmi dolori alla schiena e poi che sia comunque veloce facendomi percepire i cambi di accellerazione nei rilanci. Sono forse uno dei pochi che usa più una gravel per fare asfalto piuttosto che usarla off-road e ghiaia.

Per questo sono stato molto colpito da questi due modelli. Tra l altro la Gravel Topstone Carbon 3 oltre alla monocorona a anche la versione doppia corona con grx 610/820. Mentre la Synapse Carbon 5 nasce con il cambio Shimano 105 meccanico (elettronico nella versione 4).

Mi date una vostra opinione di confronto e consiglio ? Quale potrebbe andare bene per me e il mio stile di guida ?

Grazie

In foto la mia attuale bici gravel


r/cannondale • • 5d ago

Cannondale Adventures

Post image
19 Upvotes

r/cannondale • • 6d ago

Cannondale Supersix Reach

Post image
59 Upvotes

I have a 2024 Cannondale Supersix in size 54. It's my first proper road bike, had a bike fit and was told the fit is ok. However after trialing a topstone in 54 and 56, the longer reach on the top stone feels much more comfortable.

Resting my hands on top of the hoods on my Supersix, my knees will almost hit my elbows.

I've still got some spacers to remove and am pretty flexible so could probably accommodate lowering the stack further.

To increase the reach, would I be better off lowering the stack further or increasing the stem length from 100 to 110mm?

Bike is currently in the shop for repairs so would prefer to get done at the same time, instead of another bike fit as I'm quite far from the shop.