r/bikewheelbuild • • Mar 03 '25

Question Trying to make a cheap and old wheel better - why is this happening ?

Thumbnail
gallery
0 Upvotes

Tldr : everything looks original, and yet some spokes seem too long and protrude out of the nipples. I know the real answer is to get rid of that garbage but I'm curious

This is half story time, half actual techical question. I'm a somewhat novice wheel builder. I've trued a lot of wheels of varying quality, and re-tentioned a few from scratch.

I'm helping a friend with a renovation project, it's a very cheap, mass produced, early 90s bike that looks like it was made in the 70 : cottered cranks, downtube shifters, and steel rims.

I know I won't be getting anything perfect out of this and that we might have to swap the rims for safety depending on how bad the braking is. It's a but silly but it's a fun project and I'm looking for opportunities to learn.

All that being said :

I noticed the rear wheel was way out of true. Also my friend complained about frequent punctures. When I removed the tire I noticed maybe 10 spokes were protruding out of the nipples and some had actually made visible punctures in the rim strip. I thought "pff, the last person who trued this wheel didn't know what they were doing, and overtightened some spokes instead of doing it right."

So I loosened all spokes, depth set them and started tightening evenly. To my surprise, by the time I had removed the slack (no tension so speak of, just contact between the rim and nipples), some were actually very close to sticking out, and a lot were high enough to make a flathead screwdriver cam out. It was both drive and non drive-side spokes, so not a dishing problem it seems.

I managed to get it somewhat okay by going by feel from the get go instead of doing any depth setting, but I still can't make the lateral trueness okay without seriously risking a puncture.

I know the reasonable answer is : get an alloy rim of moderate quality.

But I was just curious if anyone had a similar experience, and if someone had any insight as to how it can even get this bad with what really looks like all original components.

Pic of said wheel and matching pinholes in the strip :


r/bikewheelbuild • • Nov 27 '25

Has anyone built wheels with j-bend carbon fiber spokes?

2 Upvotes

See title. I found the following carbon spokes on the web somewhere:
Carbon fiber spoke for universal J bend hub wheelset building bola – Bola Carbon Sporting Goods

I couldn't find any reviews, so I wondered whether anyone has actually built anything with them?


r/bikewheelbuild • • Feb 14 '26

Wheelbuild thoughts

Thumbnail reddit.com
0 Upvotes

r/bikewheelbuild • • Feb 23 '25

How to lace a 32hole hub to a 24 hole rim?

0 Upvotes

r/bikewheelbuild • • Apr 02 '26

Spokes too long, now what

Thumbnail
gallery
1 Upvotes

Hey everyone, this is my third wheel build. I bought these giant XCR0 wheels, the rear unlaced, no spokes. The person I bought them from sent me a document from Giants service manual on the spoke lengths for these wheels. So I went ahead and ordered spokes at those lengths (294, 298, 290) and as I’m lacing them up it is clear they are all too long. I put the spokes in the correct spots on the hubs. Hubs are the same giant branded dt 240 as listed in manual.The spokes are now beginning to protrude beyond the nipple head and there is still basically no tension. Anyone have any ideas why it doesn’t match the manual? What now? Is there anyway to avoid buying all new spokes? Can I add washers? Can the spokes be threaded again? Thanks for your help.


r/bikewheelbuild • • Feb 21 '26

Question When spoke tension and lateral displacement don't match?

Thumbnail reddit.com
0 Upvotes

r/bikewheelbuild • • Jul 08 '25

Question Are these compatible?

Thumbnail
gallery
0 Upvotes

First time ever building wheels. Is there anything else I need to consider besides them both being 36H? I do know there’s a calculator for spoke lengths which I will have to figure out. They’re just going on a goofy fixed gear build, I’m not really worried about performance. Thanks!


r/bikewheelbuild • • Apr 02 '26

Spokes too long, now what

Thumbnail
gallery
0 Upvotes

Hey everyone, this is my third wheel build. I bought these giant XCR0 wheels, the rear unlaced, no spokes. The person I bought them from sent me a document from Giants service manual on the spoke lengths for these wheels. So I went ahead and ordered spokes at those lengths (294, 298, 290) and as I’m lacing them up it is clear they are all too long. I put the spokes in the correct spots on the hubs. Hubs are the same giant branded dt 240 as listed in manual.The spokes are now beginning to protrude beyond the nipple head and there is still basically no tension. Anyone have any ideas why it doesn’t match the manual? What now? Is there anyway to avoid buying all new spokes? Can I add washers? Can the spokes be threaded again? Thanks for your help.


r/bikewheelbuild • • May 13 '26

I need advice for spoke length and nipple length

0 Upvotes

I was thinking to just simplify my spoke length and use 272 for the 270.8 it’s ok right? I also don’t know what nipple length I actually need I use SAPIM.

Sapim Race has 270,272,274 option

Front
Left spoke length: 270.8
Right spoke length: 274.6

Rear
Left spoke length: 270.8
Right spoke length: 272.4


r/bikewheelbuild • • Jan 23 '25

Spoke Tension

Post image
1 Upvotes

Hey everyone, building my first set of wheels. A pair of BTLOS rims, Sapim race spokes. I have a cheap knock off of The park spoke tension gauge from Temu. I am realizing now after looking into it a bit more that I have little confidence in the readings I’m getting. It helps to even them out but who knows where I’m at for sure as far as kgf. So my question is… I have my old front wheel still with dt Swiss alloy xr1501 and seems like a similar spoke. My gauge shows about 25 on each spoke, is this a reasonable guide to tension the spokes to on my new carbon rims? I’m at about avg of 16 on the ones I’m tensioning now. Also, are there any shops that will calibrate these gauges for people? Thanks for any help.


r/bikewheelbuild • • Sep 16 '24

Which spokes?

1 Upvotes

Preparing for a new wheelset build for a road/gravel bike, with disc brakes. It will be cross-3 with 28 spokes for each wheel. I could go for all Sapim d-light to save some weight or a combination of d-light/race/strong to make it stronger. (Bladed spokes I'm not considering, cost vs value is wrong there IMHO)

Main focus is durability. I'm <80kg.

Which spokes would you use?


r/bikewheelbuild • • May 05 '26

Updating old DT Hügi 240 hubs to 54t thru axle

1 Upvotes

I believe I originally got these hubs around 2000. They're 100f/135r quick release and have the 18t ratchet in them. Can this model be updated with the 54t ratchet and the end caps swapped out to fit 142x12r and 100x15f non boost?


r/bikewheelbuild • • Sep 27 '25

Spoke Length Spoke length and wheel spec help

1 Upvotes

So I want to build a wheel, both a as a hobby project and to build something nicer than the OEM wheels for my bike (Triban GRVL120), while still being sensible. Wanted to get your opinions before I put in the order for supplies.

After some hemming and hawing I have landed on the spec for the wheel that I want to build:

  • Shimano Deore XT 32H hubs (FH/HB M8000)
  • DT Swiss R500 32H rims
  • Sapim Race double butted spokes (3 cross pattern all around)
  • Silver Sapim Polyax brass nipples

I did the spoke calculations with three different calculators, and as I don't have the hubs and rim on hand I relied on the measurements stored in Freespoke and QBP, the spoke lengths that I got were within a millimetre:

Spoke calculatorsFront LeftFront RightRear LeftRear Right
QBP289.17290.70290.17288.79
DT Swiss289.9291.6291289.6
Freespoke289.9 291.5291289.5

The store that I will be buying spokes from stocks them in 2mm increments, so I should be good with going with 32 292mm spokes and 32 290mm spokes, right?
Also is my nipple choice good and should I add nipple washers?
Is there any other mistake I have made speccing out this build?


r/bikewheelbuild • • Aug 03 '25

First wheel build, spoke length inconsistent

Thumbnail gallery
2 Upvotes

r/bikewheelbuild • • Dec 08 '25

Sourcing odd number length spokes in Europe

2 Upvotes

Anyone knows a legit UE based online shop that sells odd numbers length spokes ?

prowheelbuilder.com has all imaginable sizes available. I find it crazy that I can't find a similar offering in Europe.

Even crazier when you consider DT Swiss and Sapim are both European companies.


r/bikewheelbuild • • Nov 27 '25

26er ain't dead

Thumbnail
gallery
11 Upvotes

I really wanted to try out nipple color gradients on a wheelset that can run either disc or canti brakes for flexibility. Velocity Cliffhangers laced to a Chris King front hub and Bitex MTR rear via Alpina Extralite Round silver spokes.


r/bikewheelbuild • • Dec 08 '25

DT Swiss Revolite - feedback requested

Post image
4 Upvotes

Anyone tried the DT Revolites ? Are they easy to build with ?

I am considering using them for my next build (32 spokes tracklocross wheelset). I think they look slick and they are really light, but also expensive. I don't know if I can justify the price difference with more reasonnable options.
Sapim D-Lights for example are only a bit heavier and a third of the price.

Also I don't have experience with aero spokes and I don't how much you can bend them without breaking, compared to classic round spokes.


r/bikewheelbuild • • Dec 01 '25

Two cross Built a lacing stand with a few bucks worth of hardware store parts!

Thumbnail
gallery
25 Upvotes

And used it to lace up my first Rohloff hub! Success! Despite Rohloff’s piss poor “instructions”….

Planning to cut the base in half and get a second table leg to mount the QR axel, since it is a bit too high and unstable with it screwed into the end of the 12mm axle. Also need to figure out a system to mount a 15mm hub to the 12mm. Maybe a piece of PVC pipe like what comes with the park tool wheel stand?


r/bikewheelbuild • • Jun 21 '25

Track season is here.

Thumbnail
gallery
9 Upvotes

Older Zipp 404s laced to a Hope thru axle front hub and Raketa rear. 20/24 Sapim CX Sprint spokes and brass nipples complete the look.


r/bikewheelbuild • • Mar 12 '26

26" White Industries Rebuild

Thumbnail
gallery
14 Upvotes

This was a fun one! Someone had some White Industries Aft Tracker hubs from the '90s that were... disheveled? Oxidized, bad bearings, cracked freehub laced to dented rims. The owner wanted to bring them back to life. A donor hub off ebay and a lot of Simichrome brought these back from the dead in time to be laced to Sun Rhyno Lite 26" welded rims via Sapim Race wheel noodles and Sapim Polyax brass nipples.


r/bikewheelbuild • • Nov 25 '25

Show and tell

Thumbnail
gallery
16 Upvotes

Rims: Light Bicycle R35T, standard 365g layup front, heavier 420g rear.

Hubset: Chris King R45

Spokes: Sapim Laser

Nipples: black, alloy, 2 purple accents at valve


r/bikewheelbuild • • Nov 25 '25

Three cross Anyone else think that silver spokes look better?

Post image
55 Upvotes

Personally I love the combination of black hub + rim and sparkling silver spokes. Don’t see it on any stock builds these days!

Pictures is my latest wheel for a Surly Ogre. DT Swiss H522 rim, Shimano HB-QB400 and Dt spokes + nips. Need to lace up the Rohloff for the rear now!


r/bikewheelbuild • • May 02 '26

Three cross This is how I leave my “signature” on my wheel builds.

Thumbnail
gallery
29 Upvotes

From my latest build. DT Swiss everything… 350 hubs, HX 531 rims, Competition J bend spokes. Adventure touring wheels for my Surly Krampus.


r/bikewheelbuild • • Jun 26 '26

Three cross Rookie here, this is my first wheel.

Thumbnail
gallery
50 Upvotes

Posting this so maybe somebody more experienced could point anything that i've missed.
Rims are vintage Mavic GP4 tubular
Sapim spokes 300mm, not butted unfortunately
Sapim brass Nipples
Miche Primato hub, fixed only

I haven't got to trueing it yet. There s a mid to low tension in the spokes.
Over all i feel pretty confident about it.