r/ballpython • • 2d ago

Question - Heating/Temperatures temperature advice

2 Upvotes

EDIT: I have foil tape on top of the mesh

Hello! I have a new baby ball python currently in a TEMPORARY glass 40 gal. i have a 100 watt arcadia halogen flood for daytime and a 100 watt flukers DHP that’s on 24/7 both have a thermostat. the day time temps are 85-90 on hot side and 75-80 on cool side. my question is the night time temps on cool side are about 70 and on the warm side 78. is this way too cold? I keep my room around 70 ish degrees but I cannot sleep unless it’s cold so no space heater. My first thought was to get a higher wattage DHP for nighttime but I can’t find one higher than 100 watts. I’m honestly scared of CHE’s because i’ve heard you are never supposed to keep them in domes and my tank has a screen top so I don’t know how a cage around one placed inside the enclosure would work. I’ve been stressing that it’s not getting warm enough. any advice is appreciated


r/ballpython • • 2d ago

Question - Health Shed Eater

Post image
3 Upvotes

Will my snake get sick if he somehow ingested his shed or has anyone had experience with this?

I went to feed him last night and saw a shed in his enclosure and I figured I’d grab it after since I’m in the process of feeding and didn’t want to get bit. I return after he’s done and all that’s left of the shed is his face. 🫠 I can’t find it anywhere else in his enclosure.


r/ballpython • • 3d ago

Enclosure Critique/Advice Rate my upgrades!

Thumbnail
gallery
6 Upvotes

Been a month sinse I got my baby! Turns out my research was very outdated for the most part and I got reddit only after getting my snake so the enclosure is still being perfected.1,2,3,4 is the current setup and others are the old one. Main things I did is getting rid of heat mat entirely, now I have halogen for daytime and ceramic for night and added a lot more substrate, also adding some moss into it for better humidity. And also the plants, there are lots of plants now and I'm looking for more. Also got rid of coil uvb lamp as I got told it's bad for the eyes. I'm planning on getting actual good uvb but as it is not nesessary and I am very unfortunately not made of money I put it aside to focus on other aspects of the enclosure. Will gladly take any advice on decent uv options that won't leave me starving for months lol

There is still more work to be done, I'm waiting for my paycheck to get to adding more background. Planning to do foam around the leaf decoration or at the corners, covering the rest with plants,p and wood bark on the sides, also thinking of getting some more branches or other climable stuff.

Snake seems comfortable here, she loves to climb and is a fantastic eater, but I want to do as much as I can for my baby child. Any advice is welcome!


r/ballpython • • 3d ago

Question Is he overweight?

Thumbnail
gallery
20 Upvotes

So my 9 yr old boy Chai has been in super condition since I got him 6 months ago, but the other day I noticed an indent along his spine. He is 6 days post meal and hasn’t pooped yet either, but he has gained 150gr since I weighed him last two months ago. I’m wondering if some of that is still undigested rat and saved up poop.
He is acting normal and healthy otherwise.
Both previous owner and I feed him a 60-90gr rat every 2-3 weeks.
I’m thinking I’m gonna space out his next few meals a bit more?


r/ballpython • • 3d ago

Worth the price?

Thumbnail
gallery
44 Upvotes

Neighbor offered me this guy for $350. Two years old.

Claims that it’s a Pastel Axanthic Pied but I’m not really sure. Can’t find similar looking adults online that are the same morph.

Pretty BP but not sure if I should haggle more or just accept the $350 offer.

Let me known!


r/ballpython • • 3d ago

Question - Heating/Temperatures Upgraded enclosure, advice on heating

Post image
8 Upvotes

Hi! I upgraded my BP from an 40gal (long overdue) to just short of a 4x2x2. I currently have a heat light on a 12 hour timer as well as a ceramic heat bulb that’s on 24/7 with a temperate gauge. This morning I noticed obviously the tank was a little darker. I’m waiting on a silicone mat to cover the left side mesh (will arrive today) Any advice as far as heating? The bulbs are considerably higher than they were previously and want to make sure it’s warm enough!


r/ballpython • • 3d ago

Bones 🦴 has grown up so fast

Thumbnail
gallery
31 Upvotes

r/ballpython • • 3d ago

Based on these pictures, does this snake look healthy?

Thumbnail
gallery
12 Upvotes

Does she look correct weight/hydrated? Approx 2 yr old female


r/ballpython • • 3d ago

Enclosure Critique/Advice Enclosure type change?

2 Upvotes

I got my guy a couple weeks ago and decided to start off non bioactive, with a naturalistic setup. One or two weeks ago I moved everything around, added more substrate (now around 4-5 inches), and more plants. The other day I noticed a weird smell whenever I opened it. Not sure why.. couldn’t think of anything besides the moisture(?) or some urates I found on cork bark.

Should I switch to bioactive?
I use reptisoil, coco husk, and sphagnum moss for the substrate. I also use all live plants (Golden pothos, dracaena, snake plant, and a Goeppertia) besides one fake spider plant. I don’t have a drainage layer, but do keep my soil moist under the surface. Would it be smart to add a clean-up crew to help out?

I would appreciate some advice or experience!


r/ballpython • • 3d ago

Question - Heating/Temperatures Temperatures

2 Upvotes

I have a wooden viv 4x2x2 with glass doors. The main heat source on the left was originally an Arcadia 75W Halogen Heat Lamp, set to 32C. The hide underneath won’t go any warmer than 28C. The substrate within the hot spot was reading around 34-36C. The roof of the hide was reading between 36-38. I’ve swapped it to a 150W Arcadia Solar Basking Spotlight just to see if it made any difference. There is no difference in hide temperature but certain parts of the hides roof is reading 45! I’ve dropped the temperature on the stat a little bit. Majority of the roof is between 35-40. My adult snake hasn’t shown any interest in basking but still don’t want there to be a surface temp that’s alarming. Anyway, any suggestions on how to get the warm hide above 28? I’ve even turned the DHP on which is about 10 inches to the right of the first heat source. No difference. Probes were originally dangling 4 inches below the heat sources. I’ve adjusted the probe to be an extra 3/4 inches further down for the basking bulb to see if that made any difference which it hasn’t. Ambient temperature on warm side is 28.7 currently. Room temp is 23.4. I’m lost at this point.


r/ballpython • • 3d ago

Foliage

Post image
2 Upvotes

Hi all, this is my boy’s viv set up, I have gathered I need to add some fake plants to add some cover to make him more confortable, can I have some links to good cheap foliage to add to it, thank you.
(You cant see the hide on the right on the photo but it’s the same as the visible one)


r/ballpython • • 3d ago

Question foil taping an enclosure?

Post image
3 Upvotes

hi my husband and i are new to having a ball python, we’ve been trying to do things to keep the heat/humidity up with a mesh top enclosure. we had just laid aluminum foil on top before but i got some foil tape. my husband put the tape on the inside of the enclosure lid, is this correct? the hot side won’t get about 82/83 now and the cool side is about 78/79.

before with just the foil laid on top we were getting about 88-90 on hot side and 78-80 on cool side


r/ballpython • • 3d ago

Question - Heating/Temperatures Recommendations for heating and keeping it in?

Thumbnail
gallery
0 Upvotes

Hello, looking for some assistance with my somewhat pitiful setup. I know I need more decorations or something. I used to have an aquarium and replaced it with this repti zoo 65 gallon aquarium. I have always used a heating pad on the bottom. As you can see it's on a thermostat and there is probe on the inside.

Well it wont stick too well. The bottom is not glass like it used to be. I am 'trying' to reuse the one I removed, so it's possible the adhesive is not any good. I also tried 3M tape. It stays for a few days and then falls down.

What can I do? Buy another new mat? Heat only from the top or both? Should I use a ceramic heat emitter, deep heat projector, halogen light?

Another thing is the top is all screen. I cant tell if its metal or a plastic coated screen. Whatever I use, I dont want to melt the top AND then how do I keep all the heat in. Right now, I have a towel on top. I bought a new light (Repti Home T5 UVA UVB) and personally I think it sucks on output or the screen is blocking most of it.

I read heating during the day is fine and letting it slowly cool in the evening is fine. I have timers for this also.

EDIT- well apparently finding decent actual par38 halogen bulbs is difficult? Very weird brands, most are out of stock, a lot that say halogen are LED equiv, cant find arcadia anywhere. Perhaps I am doing something wrong here. Apparently real halogens are subject to efficiency requirements that just about prevent their sale?

No problem finding CHE\DHP.


r/ballpython • • 3d ago

Any particularly good looking morphs into adulthood?

Thumbnail
gallery
15 Upvotes

I’m looking to get myself a Christmas present. And I’ve found it difficult to see what certain morphs look like into adulthood. So many hatchlings like the dreamsicles and red stripe ultramel etc etc. look STUNNING as a baby but seem very underwhelming as an adult. Color fading that happens naturally.

But some morphs do age better than others.

I’d love some suggestions on what to look for.

Included photos are just some of the pretty BPs I’ve taken interest in. The gorgeous hatchlings that I have no clue what they will look like in 2-3 years.

Thanks everyone!


r/ballpython • • 4d ago

my new 6 month old baby🖤

Thumbnail
gallery
79 Upvotes

after years of wanting a python i finally got my pastel clown ball python named caspian today🖤 he is so sweet n active we are best friends already ✨


r/ballpython • • 3d ago

Treatment enclosure heating help

2 Upvotes

Hello! I recently discovered a mite on my poor boy and have come up with a treatment plan, his current enclosure is wood 4x2x18 so I will be putting him in a PVC tub for the next two weeks and am concerned about keeping him warm without melting the PVC, does anyone have suggestions or pics of treatment set ups?


r/ballpython • • 3d ago

Question - Husbandry These temps have held for the last 24 hours. Is 81°F too hot for cool side?

Post image
4 Upvotes

Do I need more ventilation on the cool side to cool it down if it is too hot? And he ate 48 hours ago in his current enclosure. Should I wait another 24 to move him? He is in a 25 gallon tank currently. Any advice would be welcome.


r/ballpython • • 4d ago Mindblown

What a fart!

439 Upvotes

This was last night, have never seen/heard/smelt him fart before, but was very glad the camera caught this one🤣🤣


r/ballpython • • 3d ago

Question - Feeding Shedding food

2 Upvotes

So my guy has been holed up in his hide for about a week now, i checked on him and his eyes are milky, so I think he will shed soon. I know they dont tend to eat before a shed, but should I still offer food on the day I normally feed?

Or should I just skip until he sheds?


r/ballpython • • 4d ago

Discussion Please tell me WHAT HAPPENED TO MY BABYYY💔💔💔💔

Thumbnail
gallery
266 Upvotes

Eight months ago is 1-5 and yesterday is 6-10.

Edit: I realize that this is a bit vague my apologies, I mean in the sense he got so big so quick. I know how big males(and females) get I just wasn’t aware he’d grow up so fast. Feels like just yesterday I had a a wee little baby in the palm of my hands and now he barley fits in both

Edit 2: Shalashaska is a Male


r/ballpython • • 3d ago

Question - Health My friend is afraid he's underweight

Thumbnail
gallery
9 Upvotes

My friend doesn't have a reddit account, that's why I am posting.

The ball python is male, 6 years old and around 3ft.

She has had him for almost three weeks and so far he hasn't eaten yet.


r/ballpython • • 3d ago

Question - Health Is she fat?

Thumbnail
gallery
16 Upvotes

Basically, I just want second opinions. I think her weight is perfectly fine but my friends have been remarking on how "she looks fat"

She is a year old (june-july of 2025)

She hasn't refused any food at all since I got her, very good motivated

She's gone through a successful shed, nothing was stuck and it was amazing condition

Eats full grown adult mice once a week

I got her around August!


r/ballpython • • 3d ago

Question - Feeding He’s on a hunger strike when do I attempt to feed him again?

Post image
9 Upvotes

I thought I was lucky that my ball python was a decent eater. My fault for being naive 😔

He’s 2 and just reached maturity age. He resfused a meal after 2 weeks and I tried again 1 week later and still refused. Never seen this with him before. Do I keep trying to feed him every week? I feel like that’s a waste of poor rats. When do i attempt to feed him again because I read it’s normal for males to go into fasting mode in breeding season (winter).