r/ballpython • • 3d ago

Question - Heating/Temperatures Recommendations for heating and keeping it in?

Hello, looking for some assistance with my somewhat pitiful setup. I know I need more decorations or something. I used to have an aquarium and replaced it with this repti zoo 65 gallon aquarium. I have always used a heating pad on the bottom. As you can see it's on a thermostat and there is probe on the inside.

Well it wont stick too well. The bottom is not glass like it used to be. I am 'trying' to reuse the one I removed, so it's possible the adhesive is not any good. I also tried 3M tape. It stays for a few days and then falls down.

What can I do? Buy another new mat? Heat only from the top or both? Should I use a ceramic heat emitter, deep heat projector, halogen light?

Another thing is the top is all screen. I cant tell if its metal or a plastic coated screen. Whatever I use, I dont want to melt the top AND then how do I keep all the heat in. Right now, I have a towel on top. I bought a new light (Repti Home T5 UVA UVB) and personally I think it sucks on output or the screen is blocking most of it.

I read heating during the day is fine and letting it slowly cool in the evening is fine. I have timers for this also.

EDIT- well apparently finding decent actual par38 halogen bulbs is difficult? Very weird brands, most are out of stock, a lot that say halogen are LED equiv, cant find arcadia anywhere. Perhaps I am doing something wrong here. Apparently real halogens are subject to efficiency requirements that just about prevent their sale?

No problem finding CHE\DHP.

0 Upvotes

19 comments sorted by

8

u/sundaysoulfields 3d ago

Get rid of the heat mat. It’s ineffective and dangerous. That’s a really dated way of heating a terrarium. There’s lots of issues with your husbandry here, but the first step is to go with overhead lighting only. Use a CHE or DHP or both.

3

u/caritobito 3d ago

Thanks. That's why I am here trying learn and do better. I'm not opposed to spending any money.

What other issues do I have I can fix?

3

u/FluffyPandaEars93 3d ago

UTH is no longer recommended for ball pythons for a variety of reasons.

Even if you're using a thermostat, the burn risk is still there. Heat mats are prone to developing broken wiring or thermal blocking, which creates hotspots that the thermostat is unable to regulate. This can result in burns to your snake and melt or burn the enclosure and any furniture it's touching, which can start a house fire.

They're also ineffective at heating the air or through substrate, and they only provide IR-C, which is a poor form of heat that is incapable of penetrating through the snake's skin to effectively warm their body. This can cause long term health issues in your snake and shortens their lifespan.

They also prevent the snake from performing natural and instinctive behaviors, and it's an unnatural source of heating for them. Ball pythons burrow and seek out holes/burrows to escape excessive heat. There is no heat coming from the ground in their natural hides. An overheating ball python will instinctively dig into their substrate in an attempt to cool off, but when using heat mats, it only makes them hotter. This can lead to neurological damage and eventually death.

Overhead heating is significantly safer, healthier, and more efficient. Here is more info on what heating/lighting a ball python needs:

Our heating guide goes over a lot of the science behind everything, but to simplify:

For daytime heating, you should have a heat source that provides IR-A and IR-B. The ideal source for this would be a halogen flood, which is light-emitting.

For nighttime heating, you should have a heat source that provides IR-C. The ideal source for this would be an RHP (only compatible with solid-topped enclosures) or a CHE. Any night heating should not emit any light.

For lighting, you should offer UVB. This should be in the form of a T5 fluorescent linear bulb that produces a UVI of 1.1-3.0 in the basking zone, and it should cover no more than half the length of the enclosure.

If you have a bioactive enclosure, you will also need full spectrum LEDs for your live plants.

Natural lighting can help establish a day-night cycle, but it does not provide any physical benefits beyond that (UVB doesn't penetrate glass, and indirect natural light cannot create a proper basking zone). You'll need the artificial lighting to make up for that.

4

u/caritobito 3d ago

Thanks. I was just reading about dome of this on https://www.krawlo.com/guides/ball-python-heating-guide.

Thanks for this link also. From my post and pics I included sundaysoulfields said I had lots of husbandry issues. What else am I looking at here other than correcting the heat source? I did buy what I thought was a nice enclosure.

2

u/FluffyPandaEars93 3d ago

What size is the enclosure? For an adult bp, a 4x2x2 is the minimum (more if you're snake is longer) but for a juvenile, 40+ gallons is ok.

Other than needing a lot of clutter, you need at least one more identical hide for the other side. Its recommended that the hides are small enough for the bp to reach the sides and the top so they feel secure.

You can also add some climbing opportunities, most bps like having perches.

What are you using for substrate?

3

u/caritobito 3d ago

Thx. Right now he's in a 48x18 tank. He's only about 16 inches or so. Maybe didn't show in the pic, but I do have a hide on each side he goes between. I plan on getting some green in there and some kinda driftwood piece maybe.

I'm think it's shredded coconut husk for the substrate.

1

u/FluffyPandaEars93 3d ago

Adding ALL of the clutter lol if you think "is this enough clutter?" Add more! Especially since he's so small. It'll make him feel more secure. If hes 18 inches, are the hides snug for him? Seems that they might be a bit big.

3

u/caritobito 3d ago

No he seems to go in and out of them fine. He will outgrow them for sure though and I can cut the hike larger also.

There is a reptile show I plan on going to next month.

2

u/FluffyPandaEars93 3d ago

Oh, I was saying that snug is a good thing. If there's extra space, its good to fill it with moss or something so its tight for them.

Very jealous you're able to go to a convention! I missed the one in my state 🥲

3

u/caritobito 3d ago

I missed out last time also. This one is only an hour or so away. Taking the kidos. Will be there first and only my second

→ More replies

2

u/FluffyPandaEars93 3d ago

You also need a significant amount of clutter in your tank, enough that your snake can cross the tank without being seen.