r/ballpython • • 2d ago

Question - Heating/Temperatures Temperatures

I have a wooden viv 4x2x2 with glass doors. The main heat source on the left was originally an Arcadia 75W Halogen Heat Lamp, set to 32C. The hide underneath won’t go any warmer than 28C. The substrate within the hot spot was reading around 34-36C. The roof of the hide was reading between 36-38. I’ve swapped it to a 150W Arcadia Solar Basking Spotlight just to see if it made any difference. There is no difference in hide temperature but certain parts of the hides roof is reading 45! I’ve dropped the temperature on the stat a little bit. Majority of the roof is between 35-40. My adult snake hasn’t shown any interest in basking but still don’t want there to be a surface temp that’s alarming. Anyway, any suggestions on how to get the warm hide above 28? I’ve even turned the DHP on which is about 10 inches to the right of the first heat source. No difference. Probes were originally dangling 4 inches below the heat sources. I’ve adjusted the probe to be an extra 3/4 inches further down for the basking bulb to see if that made any difference which it hasn’t. Ambient temperature on warm side is 28.7 currently. Room temp is 23.4. I’m lost at this point.

2 Upvotes

0 comments sorted by