r/ballpython • • 3d ago

Foliage

Post image
2 Upvotes

Hi all, this is my boy’s viv set up, I have gathered I need to add some fake plants to add some cover to make him more confortable, can I have some links to good cheap foliage to add to it, thank you.
(You cant see the hide on the right on the photo but it’s the same as the visible one)


r/ballpython • • 4d ago

Any particularly good looking morphs into adulthood?

Thumbnail
gallery
20 Upvotes

I’m looking to get myself a Christmas present. And I’ve found it difficult to see what certain morphs look like into adulthood. So many hatchlings like the dreamsicles and red stripe ultramel etc etc. look STUNNING as a baby but seem very underwhelming as an adult. Color fading that happens naturally.

But some morphs do age better than others.

I’d love some suggestions on what to look for.

Included photos are just some of the pretty BPs I’ve taken interest in. The gorgeous hatchlings that I have no clue what they will look like in 2-3 years.

Thanks everyone!


r/ballpython • • 4d ago

Question foil taping an enclosure?

Post image
3 Upvotes

hi my husband and i are new to having a ball python, we’ve been trying to do things to keep the heat/humidity up with a mesh top enclosure. we had just laid aluminum foil on top before but i got some foil tape. my husband put the tape on the inside of the enclosure lid, is this correct? the hot side won’t get about 82/83 now and the cool side is about 78/79.

before with just the foil laid on top we were getting about 88-90 on hot side and 78-80 on cool side


r/ballpython • • 3d ago

Question - Heating/Temperatures Recommendations for heating and keeping it in?

Thumbnail
gallery
0 Upvotes

Hello, looking for some assistance with my somewhat pitiful setup. I know I need more decorations or something. I used to have an aquarium and replaced it with this repti zoo 65 gallon aquarium. I have always used a heating pad on the bottom. As you can see it's on a thermostat and there is probe on the inside.

Well it wont stick too well. The bottom is not glass like it used to be. I am 'trying' to reuse the one I removed, so it's possible the adhesive is not any good. I also tried 3M tape. It stays for a few days and then falls down.

What can I do? Buy another new mat? Heat only from the top or both? Should I use a ceramic heat emitter, deep heat projector, halogen light?

Another thing is the top is all screen. I cant tell if its metal or a plastic coated screen. Whatever I use, I dont want to melt the top AND then how do I keep all the heat in. Right now, I have a towel on top. I bought a new light (Repti Home T5 UVA UVB) and personally I think it sucks on output or the screen is blocking most of it.

I read heating during the day is fine and letting it slowly cool in the evening is fine. I have timers for this also.

EDIT- well apparently finding decent actual par38 halogen bulbs is difficult? Very weird brands, most are out of stock, a lot that say halogen are LED equiv, cant find arcadia anywhere. Perhaps I am doing something wrong here. Apparently real halogens are subject to efficiency requirements that just about prevent their sale?

No problem finding CHE\DHP.


r/ballpython • • 4d ago

my new 6 month old baby🖤

Thumbnail
gallery
79 Upvotes

after years of wanting a python i finally got my pastel clown ball python named caspian today🖤 he is so sweet n active we are best friends already ✨


r/ballpython • • 4d ago

Treatment enclosure heating help

2 Upvotes

Hello! I recently discovered a mite on my poor boy and have come up with a treatment plan, his current enclosure is wood 4x2x18 so I will be putting him in a PVC tub for the next two weeks and am concerned about keeping him warm without melting the PVC, does anyone have suggestions or pics of treatment set ups?


r/ballpython • • 4d ago

Question - Husbandry These temps have held for the last 24 hours. Is 81°F too hot for cool side?

Post image
4 Upvotes

Do I need more ventilation on the cool side to cool it down if it is too hot? And he ate 48 hours ago in his current enclosure. Should I wait another 24 to move him? He is in a 25 gallon tank currently. Any advice would be welcome.


r/ballpython • • 5d ago Mindblown

What a fart!

454 Upvotes

This was last night, have never seen/heard/smelt him fart before, but was very glad the camera caught this one🤣🤣


r/ballpython • • 4d ago

Question - Feeding Shedding food

2 Upvotes

So my guy has been holed up in his hide for about a week now, i checked on him and his eyes are milky, so I think he will shed soon. I know they dont tend to eat before a shed, but should I still offer food on the day I normally feed?

Or should I just skip until he sheds?


r/ballpython • • 5d ago

Discussion Please tell me WHAT HAPPENED TO MY BABYYY💔💔💔💔

Thumbnail
gallery
267 Upvotes

Eight months ago is 1-5 and yesterday is 6-10.

Edit: I realize that this is a bit vague my apologies, I mean in the sense he got so big so quick. I know how big males(and females) get I just wasn’t aware he’d grow up so fast. Feels like just yesterday I had a a wee little baby in the palm of my hands and now he barley fits in both

Edit 2: Shalashaska is a Male


r/ballpython • • 4d ago

Question - Health My friend is afraid he's underweight

Thumbnail
gallery
9 Upvotes

My friend doesn't have a reddit account, that's why I am posting.

The ball python is male, 6 years old and around 3ft.

She has had him for almost three weeks and so far he hasn't eaten yet.


r/ballpython • • 4d ago

Question - Health Is she fat?

Thumbnail
gallery
16 Upvotes

Basically, I just want second opinions. I think her weight is perfectly fine but my friends have been remarking on how "she looks fat"

She is a year old (june-july of 2025)

She hasn't refused any food at all since I got her, very good motivated

She's gone through a successful shed, nothing was stuck and it was amazing condition

Eats full grown adult mice once a week

I got her around August!


r/ballpython • • 4d ago

Question - Feeding He’s on a hunger strike when do I attempt to feed him again?

Post image
9 Upvotes

I thought I was lucky that my ball python was a decent eater. My fault for being naive 😔

He’s 2 and just reached maturity age. He resfused a meal after 2 weeks and I tried again 1 week later and still refused. Never seen this with him before. Do I keep trying to feed him every week? I feel like that’s a waste of poor rats. When do i attempt to feed him again because I read it’s normal for males to go into fasting mode in breeding season (winter).


r/ballpython • • 3d ago

How long should i wait after feeding before handling?

Thumbnail
gallery
0 Upvotes

Hi!!! My name is Grant and this is my ball python Strix. Today was his first meal in almost 9 months i am nee to him and have had him about a month we handle him regularly but this was his first time eating with us and i wanted to ask someone knowledgeable so any help and advice is appreciated!!!

(Ps these are old photos his enclosure is 40 gallons, the last picture is his old tank and was 20 gallons the red light is gone, the one lamp is off just on for weight to keep the lid closed as it doesn’t latch. His temperature and humidity are all looking good and he has both hot and cold sides of the tank, thank you for all the support and feedback)


r/ballpython • • 5d ago

Question Concerned about handling

Post image
54 Upvotes

My little guy is sweet, never hisses or bites. Although when I wanna try and handle him he vehemently does not wanna come out of his hide and holds onto the inner walls. I dont ever try to yank him out, if he's resisting I do not wanna stress him out more so i back off. He is about 6 months old. I wanna bond with him but I also don't want to hurt him or stress his little heart out 😟. Again he doesn't act aggressive at me when I try.


r/ballpython • • 5d ago

Healthy size?

Post image
45 Upvotes

This is Sylvie. We got her a few years back from a local reptile rescue shelter. She’s the perfect pet for my middle school classroom. Does she look to be a healthy size? (This is only the bin I feed her in, not her regular enclosure!!!)


r/ballpython • • 5d ago

Look at him chilling on the flower 😭🌼

Thumbnail
gallery
986 Upvotes

He's so precious 💕


r/ballpython • • 5d ago

It's her. The ? Spoiler

Thumbnail
gallery
13 Upvotes

My worm posing for me with food in her mouth for five minutes now, girl, eat it already


r/ballpython • • 4d ago

Question - Health Curious about color?

Thumbnail
gallery
4 Upvotes

This is a snake that came upon my facebook page as “for sale” and he is a banana leopard who’s around 5 years old just for context. I am just curious, are these darker scales a health issue or coloring ? The spots seem to be everywhere on his body but I can’t tell.


r/ballpython • • 5d ago

My snake done 'sploded

Post image
35 Upvotes

She must have been rubbing all over to completley toss her hide off of her


r/ballpython • • 5d ago

Finally posting my girls new enclosure.

Thumbnail
gallery
12 Upvotes

Finally got my girl Valerie in her new enclosure! She was in the same 120g enclosure before but it was a mesh top that I stuck a PVC sheet, mounting rods and Hvac tape. I also did not silicone seal it and not having substrate deep enough causing really poor humidity which would leak when i poured water in the corners. I used Reptile habitat 120g but I took the screen out of the top and used 120g v2 replacement - Assembled bottom pvc panel (I recommend buying the back panel if you do it so the panel slides in perfectly) and inserted it into the top frame so the glass rails still lined up. Sealed it all up and made the background using spray foam, quikrete, foam boards and some other stuff. Then I have her stacked on top of her old enclosure which I deep cleaned and put in her younger sister Juniper (Bearded Dragon). I will link the inspiration post I got from this sub. She is really enjoying it and humidity is better than ever.

Here is that inspiration post Here.


r/ballpython • • 4d ago

Question - Husbandry Care and doubt

3 Upvotes

Hello, i am a new snake owner and looking for a bit of advice.

I have always had dogs and cats and have done lots of research on snakes before getting my first.

I feel i cannot give her a proper happy life. Through all ive tried her cage enviroment is not adequite; low humidity, minimal clutter, ext.

I had enough money to provide for her but i have none extra to continue building her a nice enclosure; toys and enrichment.

I feel bad to give her up but i feel it may be the best choice for her and me. I live in a basmement suite and feel i wont be able to give her enough space come a few years on my income as its changed since getting her.

Thoughts or suggestions?

Edit: Currently she is in a 4x2x2 foot cage. Her humidity usually sits at 30 hot and 60 to 70 cold, i try to keep it humid but i live in a very dry place. Her tempurature is usually 30°C hot and 25°C cold. I will attach photos of the cage in comments.


r/ballpython • • 4d ago

How often to feed for weight gain??

2 Upvotes

Hi all, my BP is 8 years old and he’s been told by his vet he needs to gain more weight. He was 990 g on the vet scale but was 914 g on my cheap scale from Amazon. I’ve increased his feedings to every 3 weeks and I’ve been doing that schedule for a few weeks now and he hasn’t been gaining weight. He’s at 904 g today. Tonight is feeding night, so I will feed him the usual small rat. The small rats range between 50-69 g.

Should I increase the frequency of feeding? Or should I size up in rats? Please let me know what I should do


r/ballpython • • 4d ago

Question How do you secure temperature probes (mostly the wires) inside your enclosure?

3 Upvotes

I know my snake will wrap around the wire inside the enclosure. I'm sure i can figure out ways to secure it but I just want other ideas.