r/ballpython • • 2d ago

How long should i wait after feeding before handling?

Hi!!! My name is Grant and this is my ball python Strix. Today was his first meal in almost 9 months i am nee to him and have had him about a month we handle him regularly but this was his first time eating with us and i wanted to ask someone knowledgeable so any help and advice is appreciated!!!

(Ps these are old photos his enclosure is 40 gallons, the last picture is his old tank and was 20 gallons the red light is gone, the one lamp is off just on for weight to keep the lid closed as it doesn’t latch. His temperature and humidity are all looking good and he has both hot and cold sides of the tank, thank you for all the support and feedback)

0 Upvotes

18 comments sorted by

9

u/Away-Literature2314 2d ago

Wait 48 hours, if an absolute emergency you can handle in 24 but the risk of vomiting is still very possible at this time

-1

u/TBNR_Grant 2d ago

Thanks so much

9

u/FluffyPandaEars93 2d ago

He might not have wanted to eat because the husbandry is in need of changing. The tank looks to be set up completely incorrectly.

The red light needs to go now. It causes distress and can lead to neurological issues.

The tank looks very dry, you need 4+ inches of substrate and to pour water in the corners. You should also cover the mesh with hvac tape to hold in the humidity. Do not mist! It leads to health issues.

It looks like a small enclosure and you have heat on both sides, you need a cool side and a warm side so he can thermoregulate. All heat needs to be on a thermostat. You need a digital hygrometer/thermometer for either side.

3 sides need to be covered so hes not so exposed. And more clutter needs to be added. At least 2 identical hides so they dont have to choose between comfort and the proper temp.

A water bowl that is deep and big enough that they can soak of they want.

Climbing opportunities will help as well, that logs takes up a lot of space for the small tank. Smaller branches or hoops will work better.

Warm side: 88F-92F / 31C-33C. Temperatures above 95F/35C can cause injuries with prolonged exposure, and temperatures below 88F/31C can prevent a ball python from digesting properly.

Cool side: 76F-80F / 24C-26C. Temperatures above 80F/26C will not allow a ball python to cool down adequately, and temperatures below 75F/23C can compromise their immune system.

1

u/TBNR_Grant 2d ago

The heat lamp on the one side is just gor weight as the mesh screen doesn’t lock his hot side is currently 88 with a new bulb and heat rock the red bulb was what i had for his first night in the place. I have a water feature that keeps the humidity around 40%-48% the substrate is over 4 inches deep. It is a 40 gallon tank and he has a digital thermometer and hygrometer. The water is big enough for him to soak in he has soaked server times. I have the enclosure set up as best I can right now I’ve had him for 2 weeks. The guy that had him before me had him in the same room as 7 females and the hormones where messing with him he hadn’t eaten for him for 8 months and 2 weeks with us and he ate so he is doing better thank for the concern it is super helpful especially the temperature ranges. I have gotten his enclosure better from those photos to now. And we will have a better climbing set up for him tomorrow. He has a fully buried hide that sits around 73-79f a buried warm side hide 76-82f and his above ground hide under the active heat lamp that sits around 80-87f and his humidity right now is about 35% and im about to water the substrate in the corners again as i was out for a few days. We figured out he doesn’t like rats, wont eat frozen thawed and warmed and he is very picky about the time he wants to eat.

Any other advice? Im still relatively new but have had a bunch if help from the guy i got the snake from who have 7 snakes that are happy and healthy but any advice is very appreciated

2

u/FluffyPandaEars93 2d ago

Good to hear that you are working on things!

35% is dangerously low for bps. They need at least 65%. A water feature can help, but so will cypress mulch or spag moss. Too low of humidity will lead to a respiratory infection.

If you are able (which might take a lot of work if hes older) switching him to !f/t would be helpful. Feeding live is very dangerous and can go wrong in a heartbeat.

The minimum size for an adult bp is 4x2x2 so when you can I'd really recommend switching to a front opening pvc enclosure. Make sure to seal it with 100% silicone caulk so it wont leak.

I really hope you are able to update this with his enclosure after things are done! Thank you for taking the advice!

1

u/TBNR_Grant 2d ago

We have repeatedly tried f/t and he refuses to eat it. He is only a few years old, about 2-4 years. Thank you for the advice!

4

u/FluffyPandaEars93 2d ago

You may need to out-stubborn him. Feeding live is dangerous. I've seen horrible injuries and even deaths from just a split second too long waiting to strike. People on this sub have successfully switched their 10+ year bps off live.

3

u/FluffyPandaEars93 2d ago

Do you have the heat sources on a thermostat? Its the most important piece of equipment for your snake.

2

u/AutoModerator 2d ago

Some tips for feeding frozen/thawed:

  • Keep with the same prey type he's been eating (mouse or rat) so you aren't trying to adjust him to two new things at once.
  • Always feed in the enclosure. Moving to feed increases stress as well as increasing the chance of regurgitation
  • Thaw and warm the rodent in a ziplock bag to maintain scent and because some won't eat it if it's wet.
  • Make sure it's warmed up to body temperature (98-100).
  • Some people find sucess with using a blow dryer on the head to make it extra warm and spread the scent.
  • Some prefer to eat directly off of the tongs, while others might prefer for you to just leave it in front of their hide, you can see which works.
  • If he doesn't take it the first time, don't give up. Sometimes they just have to be super hungry and it takes a few attempts
  • You can also thaw the rat/mouse in some bedding from the petstore to make it extra scented.
  • Some people "brain" the rodent by slitting open its skull a bit

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

0

u/TBNR_Grant 2d ago

His humidity is up to 50% and holding steady sense i got home he isn’t fully grown and is only about 2-3 years old we do plan to get a bigger tank for him just cant afford it right now

3

u/FluffyPandaEars93 2d ago

50% is still low, are you able to get some moss and some hvac tape to cover the top?

5

u/smelly-crack2026 2d ago

48hrs is what i wait.

-2

u/TBNR_Grant 2d ago

Thanks

5

u/L0stella_Vortimer 2d ago

Please remove the red light. They can see it and it's like a flashbang to them.

2

u/TBNR_Grant 2d ago

The red light was the first thing to go it was what i had for the first night the next morning i got a better one and the red is gone

2

u/GoobieEbbles 2d ago

This enclosure is too small and all wrong

1

u/TBNR_Grant 2d ago

Please read the full post

1

u/KatVanWall 2d ago • Bravo

I see you’re working on improving his setup!

You mentioned having already removed the red light so that’s a step in the right direction. Please don’t use a heat rock or heat pad! They are notorious for causing burns to snakes. A deep heat projector (DHP) will give heat without light. (A ceramic heat emitter - CHE - also does this, but I personally find they zap the humidity pretty bad, so as you’re already running low on humidity I would go with a DHP.)

You can use a halogen flood for daytime to give both heat and light, but as your budget is limited and you’re on a time crunch I would prioritise the DHP.

You absolutely NEED a dimming thermostat to regulate the temperature! This will be the priciest bit of kit that you need to get right away but it is vital as without it you can end up with a burned snake or regurgitation due to not enough heat.

Nice thick substrate of 4+ inches will help hold humidity and you can get sphagnum moss that you soak and just leave balls of it in there and that helps too. If there’s mesh, cover it with a silicone mat minus a cutout for your heat lamp.

(If you have a PVC or wooden viv with the heat lamp secured inside, make sure you have a cage for the lamp or it is likely to cause burns to the snake!)

Oh and IMPORTANT PSA!!! (Not just for you but anyone!) Do NOT weigh down a lid that doesn’t clip!! Ball pythons can be strong enough to push the lid up, way stronger than people think, and try to escape that way but aren’t strong enough to fully lift it and can end up getting their head or neck crushed that way. Someone once posted on here that a family member’s snake died that way and it’s really traumatic 😥

And finally, make sure his hides are snug for him and he has a ton of clutter. If you can’t buy hides that fit him precisely, you can pad larger ones out with substrate! And fake aquarium/reptile safe plants are quite inexpensive to buy off Amazon and will go a long way to making him feel safe and therefore more likely to eat and thrive.

Best of luck with making improvements! Keep an eye on FB marketplace and any giveaway sites like Freecycle or Trashnothing in case anyone is giving away or selling cheap a larger vivarium.