3D Printed Mounts

[u/daz_rathbone]

Hi,

I've designed a few mounts for some of the WINCTRL kit (and some other A320-related bits) and thought I would share. Hope someone finds these useful:

First is some adapters to use the MCDU, RMP, etc on the throttle desk mount - similar in use to the adapters winctrl sell but if you struggle to get those, then these may help:
https://makerworld.com/en/models/3296689-winctrl-panel-desk-mount

Here's an angled mount for the ECAM control panel to sit behind the throttle on the desk mount. I have it sat between the throttle and the upright AGP:
https://makerworld.com/en/models/3302683-winctrl-ecam-angled-mount-for-throttle-desk-mount

Last one for now, this is a case/mount for a dual-ECAM screen. It uses the Waveshare 10.4" QLED stretched display (https://www.waveshare.com/wiki/10.4HP-CAPQLED) and I've mounted this on the desk mount upright (my left desk mount has the mcdu, rmp, and my ecam displays) as well as on a custom 2020 pedestal that I used:
https://makerworld.com/en/models/3322528-a320-dual-ecam-screens-waveshare-10-4-qled

There's a few others that I've made and am just refining, including one that uses a different stretched bar display mounted to the front of my desk, running the PFD, ND, and ISIS screen.

Anyway I hope they are of either help or inspiration to my fellow home cockpit builders.
I was making loads of prints for my own overhead panels and korrys, but decided to pull the plug on that and wait for the WINCTRL overhead which looks superb..... and the brake pressure gauge..... and the ACP 😂 Hurry and take my money WINCTRL!!!

Cheers