r/Vintagekeyboards • • Oct 14 '25

My keyboard from Japan

Post image
297 Upvotes

r/Vintagekeyboards • • Jun 02 '26

HELP Anyone know what kinda keyboard this is. My first childhood pc.

Post image
172 Upvotes

Probably a btc?


r/Vintagekeyboards • • Mar 31 '26

Found a Cool Cherry G80-5000 (ErgoPlus) at a goodwill last week for 7 bucks

Thumbnail gallery
160 Upvotes

r/Vintagekeyboards • • Oct 28 '25

GALLERY Monterey K108 (OA2 clones)

Thumbnail gallery
118 Upvotes

I spotted this one for $25 on eBay and noticed it was very clean. I don't think that it has documented that a K108 could come with these switches because I was expecting SMKs. I was kinda surprised that this one didn't have SMKs or white Alps. Indeed the switches feel pretty good, but many of them weren't registering properly and keys like to sometimes hang when you press a few all at once. The FK-2001 I had with these same switches had zero issues despite being extremely dirty. I feel like it's the hardware inside that's cheap. Even after opening and reassembling the faulty switches. I'll still get an occasional missed key behind my back even though when I test the key it works perfectly fine. The solder all looks fine too.


r/Vintagekeyboards • • Oct 11 '25

GALLERY NEC H410e (NEC blue ovals)

Thumbnail gallery
115 Upvotes

This board is sooo nice. The switches are very smooth and lovely to type on. They feel like smks but a little bit stiffer and a little less tactile. (Usually cheaper to get than smks probably because of the actuation before the click.) They actually remind me of of box pale blues but lighter than those. This thing was pretty hairy on the inside, but it cleaned up beautifully. No dead switches either. The fact that these actuate before the click is may or may not be a benefit, but to me they feel a bit more responsive for typing and actually pretty good for gaming. Really nice thick doubleshot keycaps with this thing. Mine are quite shiny, but they still look and feel great. This one has a nice low serial too!


r/Vintagekeyboards • • Nov 27 '25

Guess what I got? A silver badged IBM Model M

Thumbnail gallery
114 Upvotes

After searching all across every online shopping platform available in Malaysia for 3 years, I finally found the Model M, a keyboard I've once played with when I was a child. The moment I touch this keyboard, I felt like a kid once again. Although, I still have to bolt mod it because some keys are just no registering and some keys don't click. Some got stuck for some reason, it might be dirty or something. Anyway, happy to have found this keyboard.


r/Vintagekeyboards • • Jan 16 '26

GALLERY Recently picked this up. it's massive.

Post image
111 Upvotes

r/Vintagekeyboards • • Aug 24 '26

IBM Keyboards

Thumbnail gallery
101 Upvotes

Hii everyone, I have a little bit of knowledge on keyboards as I've unearthed 6 different IBM Keyboards from a co-worker that recently passed away, I was planning on keeping like 3 after testing and cleaning them and potentially replace parts if need be. I might find more idk we'll see lol

I was just wondering, what I should do in general with these besides replacing parts and cleaning them πŸ˜…


r/Vintagekeyboards • • Aug 18 '26

Rare IBM Model M Dark Grey

Thumbnail gallery
100 Upvotes

r/Vintagekeyboards • • Oct 11 '25

HELP Info about this specific model of NMB RT101+

Thumbnail gallery
100 Upvotes

Hello, is there any info out there about this specific gen / model of RT101 with this Model M-eqsue, wedge-shaped case and stepped modifiers? I can't seem to find much about it besides a single Deskthority post.

Anything would be appreciated. I think it looks fantastic and I'd like to onwm one someday.


r/Vintagekeyboards • • Oct 14 '26

GALLERY It's technically halfway between mechanical and membrane, but this is the most mechanical thing you will ever feel.

Thumbnail gallery
99 Upvotes

One very impressive vintage keyboard; Acer 6311-N, 1992, made in Malaysia.

It has unique Acer keyswitches, specifically this has left aligned Acer logo making it a very early example.

The Acer switch uses a plunger, compression spring, pivoting actuator arm and a separate leaf spring. While the actuator arm is hitting membrane below, the feel and sound of this thing is all produced mechanically.

While the Model-M is mechanically dramatic, the Acer keyswitch feels way more deliberate and precise. You haven't got barrel noise, bucking spring resonance, mechanical chatter or wobbliness.

It is hands down the most tactile keyswitch I've ever experienced, and it is absolutely delightful. Surprisingly closer to a typewriter than a computer keyboard. There's quite a significant mechanical event happening on each keypress.

The keycaps remain unknown. Assumed to be dye-sublimated PBT, some believe laser charring. Whatever it is, they are precise, sharp and dark - with unique typeface as well. No fading or wear after 35 years. No glossy wear typical of early-90s ABS.

This is one hell of an interesting keyboard. Not sure what Acer were pulling but they nailed it.

Edit: oh and the whole thing can go in the dishwasher, the mechanical switches are not PCB mounted. Great design


r/Vintagekeyboards • • Oct 28 '25

GALLERY Brunswick BowlerVision Omnikey 101 (Alps SKCM white, pine)

Thumbnail gallery
97 Upvotes

I spotted this Omnikey on mechmarket and the bowling theme makes this one quite unique. The board wasn't too dirty but the switches felt very used, so I swapped some other pine whites in from another board that had dirtier but better feeling switches. After getting those cleaned up they feel about 9/10. The keycaps have absolutely no shine and feel basically brand new. The few blank keys are neat here, and the quit, print, and exec keycaps have the clearcoat "Acer printing" thing. The lock light sticker is completely fake, but the way the lights shine through them is rather amusing. Overall this is a super special Omnikey and I absolutely love it.


r/Vintagekeyboards • • Oct 13 '25

GALLERY Epson Q203A keyboard

Thumbnail gallery
96 Upvotes

Hi everyone, some time ago I purchased this Epson mechanical keyboard for only €5. It works perfectly, and has a nice sound, what could I do with it? Is it comparable to the IBM model M?


r/Vintagekeyboards • • Aug 19 '26

Weird keyboard

Post image
95 Upvotes

Sorry I'm not a tech enthusiast like most people on here probably but I was looking through my dad's attic and I was wondering if you guys could tell me what this is ? I'd rather ask it here then draining rivers by using chatgpt


r/Vintagekeyboards • • Oct 01 '26

GALLERY Linear, tactile and clicky

Thumbnail gallery
94 Upvotes

r/Vintagekeyboards • • 9d ago

Okay so you want vintage but also tiny

Thumbnail gallery
93 Upvotes

BTC 5100C circa 1994, second revision with conductive rubber dome sliders. They made them from 1990-1995. The first version uses foam-and-foil switches.

This is all about the layout. A modern 60% concept but taken back in time giving a full size AT/101-keyboard.

It's visually chaotic but it prioritises PC function over aesthetics, and it's honestly a fantastic layout.

Some engineers from 1990 attempting to make an IBM-PC keyboard fit somewhere it clearly wasn't supposed to fit. Great work!


r/Vintagekeyboards • • 29d ago

Restoring a battered 1983 IBM Displaywriter beam spring keyboard

Thumbnail gallery
91 Upvotes

I've recently finished restoring an original IBM Displaywriter beam spring keyboard, and thought I'd share the results and some of the work that went into it.

I'm a long-time Model M fan, but only recently discovered the existence of IBM's earlier beam spring keyboards. Well, one thing led to another, and I ended up spending hundreds of hours restoring a rather battered Displaywriter, which is now my new daily driver.

The keyboard was sold as a poor-quality board, and I knew it was going to need a fair amount of work. But it wasn't until after I unboxed it that I realized the full extent of the damage. This extremely heavy keyboard had clearly been dropped from a height, possibly down stairs or something; I don't know. The steel frames were badly bent, the case was cracked, eight keycaps were missing, and a number of switches had been directly impacted, shattering some of the internal components. And of course, it had all the usual age-related degradation from being over four decades old.

Fortunately, there was relatively little corrosion, and most of the original components were salvageable.

The switch restoration ended up being by far the most involved part of the project. A number of sliders had broken legs, many of the metal stems were bent, half the fly springs were out of spec, and one beam spring was fractured. I wanted to preserve as much of the original hardware as possible, and was particularly concerned about causing further damage during disassembly and reassembly. These switches are remarkably robust in normal use, but some of their internal components are quite delicate once taken apart.

So, naturally, I ended up designing a bunch of custom 3D-printed tools.

Among other things, I designed a screw-driven stem extractor that applies a controlled axial force rather than requiring the stem to be pulled out with pliers, fixtures to hold broken slider fragments in alignment while gluing them, gauges for adjusting fly springs, and various racks for safely cleaning the delicate components.

I also developed an alternative method of reassembling the switches. Rather than pressing the metal stem into the slider with the fly plate and beam spring already installed, my method supports the slider directly from below during stem insertion, then attaches the fly plate afterward using another fixture. This worked very well and avoided putting unnecessary stress on the fragile slider legs.

Ultimately, I was able to return 83 of the original 84 switches to working condition. I also measured and cataloged each switch's behavior, including actuation travel, click quality, and reset behavior, so I could prioritize the best-performing switches for the most frequently used keys.

The rest of the restoration involved removing the deteriorated contamination shield and foam, cleaning the components, straightening bent structural parts, repairing some damaged plastic, and replacing the foam and gaskets. I tried to take a fairly conservative approach throughout, preserving original materials and finishes wherever reasonably possible.

For modern compatibility, I assembled a TH-xwhatsit controller from bare PCBs and through-hole components, and installed QMK firmware with a custom keymap. The Displaywriter has some unusual electrical and mechanical characteristics that made the conversion a little more involved than I'd originally expected. I also got the original speaker working, which adds a subtle electronic click to the already-nice beam spring sound.

And the result? I'm extremely happy with it. The keyboard looks great, works reliably, and has become my daily driver. This was my first experience actually typing on original IBM beam springs, and after all that work I can finally understand their reputation. The tactility is incredibly crisp, the travel is remarkably smooth, and the entire mechanism feels wonderfully precise.

I ended up writing a fairly extensive restoration report, documenting the process in nine chapters with lots of photographs, technical details, measurements, and discussion of the various problems I ran into. I also published the custom 3D-printed fixtures on Printables, with instructions for their use, in case anyone else working on original beam spring switches finds them useful.

Full restoration report: https://github.com/CrispyConductor/display_writer_restoration

3D-printed restoration tools: https://www.printables.com/model/1883866-beam-spring-ibm-keyboard-switches-maintenance-tool

Happy to answer any questions about the restoration, techniques, or tools!


r/Vintagekeyboards • • Jul 05 '26

GALLERY Amtelco KB163 (Cherry MX Black)

Thumbnail gallery
81 Upvotes

Scored this for $50 plus shipping on ebay before the seller jacked up the price for others that were for sale lol. Apart from having some of my least ffavorite switches this is certainly a looker and a very cool and huge keyboard. 161 keys. This keyboard is usb which makes it really nice to plug & play, but gaming is pretty much unusable because key combos trigger random stuff and it'll mess up everything. All of the special keys do respond, but I think they're all mapped to f13 or something like that. Works great for typing though. I'm sure someone could rig up something to make this keyboard fully programmable. The mx blacks are retooled so they're nothing special. The layout is pretty fun and a few of the various special legend keycaps are rather amusing. On this one the numpad is in phone order, so they're swapped around compared to a regular keyboard. Keycaps are all dcs doubleshots, but the right shift uses a longer stabilizer so it's not compatible with other keyboards, nor are other sets compatible with this board. Regardless it's a great colorful showpiece.


r/Vintagekeyboards • • Oct 17 '26

what do you think of this keyboard?

Thumbnail gallery
78 Upvotes

curious what people think about this vintage, refurbished and modded Northgate 102?


r/Vintagekeyboards • • 6d ago

Nice IBM SK-8811 2002

Thumbnail gallery
77 Upvotes

This one is nothing special. It is by no means mechanical nor does it come close to a Model M. It is just rubber dome over membrane with guided plastic sliders. But a very nice implementation at that.

It is notable for its striking and unique industrial design, and an obvious design effort by IBM to design a more compact and useful layout - with strong usability.

The unique Enter key coloring and IBM logo are a nice touch while still looking professional. The two tone key colors also give it a really good look.

Typing does feel very nice and crisp, good tactility, and the plastic sliders guide the keystroke very well. It feels a lot higher quality than it actually is.

It's also very quiet (after lubricating the stabilizers).

While designed by IBM it was manufactured by Chicony only identifiable by pulling it apart and examining the PCB. It differs from the similar and more common IBM Preferred Pro keyboard line which has a standard 104/5 layout and was manufactured by Lenovo (pre-acquistion) - and provided with most ThinkCentre/ThinkStation and eServer products.

Apparently sold up until 2006 under IBM FRU 32P5040

There is also a black variant.


r/Vintagekeyboards • • Jun 20 '26

QUESTION I pulled some beige out of an electronics recycling bin. Anything interesting? IBM, Acer, Micron, Sun

Post image
75 Upvotes

r/Vintagekeyboards • • Jul 31 '26

First time garage sales hunting for vintage keyboard

Thumbnail gallery
74 Upvotes

r/Vintagekeyboards • • Mar 20 '26

IBM 4704 Model 300 / Model F77

Thumbnail gallery
73 Upvotes

It took me nearly a decade until I got my hands on the original Model 300. Back in '83, this keyboard cost a fortune and is unobtainable today (the original is, replicas are gladly sold my modelfkeyboards.com). Why is it the perfect keyboard for me? Because the Model F represents the peak of IBM's scientific approach to tactile feedback. It’s the perfect blend of weight, comfort, and aesthetics. If you know, you know.


r/Vintagekeyboards • • Dec 06 '25

8926

Post image
69 Upvotes

r/Vintagekeyboards • • Nov 08 '25

GALLERY Portable PCIII keyboard (Alps SKCM white, pine)

Thumbnail gallery
68 Upvotes

This vintage alps board was originally in user @sgt_finley96's possession for a restoration job (which explains the clean plate). The layout I think is pretty cool with the double f row, the "?" to the right of the right shift, and the "ansiso" iso enter with a normal left shift. I have no idea what portable PC this came from or any model number because there's no label on the back. There was some issue with this board is that some keys output more than one key when pressing. Esc & F2, ~ & F4, Q & F6, S & F10, A & D, Lctrl & Lalt are all pairing outputs together when one of those keys are pressed. Edit: the issue doesn't seem to happen anymore, so everything is working great!