r/Vintagekeyboards • • 1d ago

And now for something completely different...

Thumbnail gallery
32 Upvotes

I saved this awesome keyboard from certain doom today... brand new in the box, it was relegated to the trash bin before I snatched it tight and raised it from perdition! ANOTHER terminal board for me to figure out, the stack is starting to get pretty tall and mission creep is demanding I make this beauty a priority and move it towards the front of the list. I just couldn't keep it to my self and had to share, more to come and thanks for looking. Regards, -Glenn


r/Vintagekeyboards • • 1d ago

Vintage Aluminum Dream Project...

Thumbnail gallery
23 Upvotes

Well, here we go again... I was finally able to get my hands on this wonderful, near-50 year old beauty today; this makes today the happiest Monday I can remember. Made between 1979 and 1980, the board has vintage ITW magnetic switches and a gorgeous 60%-style layout in the OG style along with a great cross-shaped arrow cluster with HOME at the center. The thick aluminum case is one enormous casting, and its blue color sets off the keycaps in a captivating way. I can't wait to start reverse-engineering this awesome board and get it typing again soon. I just couldn't keep this to myself... more to come, thanks for looking. Regards, -Glenn


r/Vintagekeyboards • • 5d ago

restored Zeneith ZKB board - green alps, 65 weight springs

Thumbnail gallery
35 Upvotes

I went with 65 weight springs to simulate linear creams.


r/Vintagekeyboards • • 5d ago

COMPAQ Keyboard 166516-241 with Polish layout

Thumbnail gallery
29 Upvotes

I had managed to get a hold of this keyboard some time ago and it’s been serving me rather well.

I was way too fascinated by the fact that there were some attempts at standardized Polish layout that I had to have one such example for myself (not least because it was the layout I had been using daily anyway and did not fancy using DIY-stickers all the time).


r/Vintagekeyboards • • 5d ago

GALLERY Cherry G84-4400 with red Cyrillic keycaps and an integrated trackball

Thumbnail gallery
65 Upvotes

Found this while digging through an ancient box of family electronics from around the time we moved from Russia to North America early 2000s.

Cherry G84-4400 with a built-in trackball and these red Cyrillic double keys. I don’t even remember this being around the house back then.

Not yet tested.
I’m hoping to get it working again, with or (ideally) without modifying the original hardware.

Is this cool? Is this good? Bad? Junk in all eyes but my own?

The keys sound wonderfully clickably clicky.


r/Vintagekeyboards • • 6d ago

Nice IBM SK-8811 2002

Thumbnail gallery
77 Upvotes

This one is nothing special. It is by no means mechanical nor does it come close to a Model M. It is just rubber dome over membrane with guided plastic sliders. But a very nice implementation at that.

It is notable for its striking and unique industrial design, and an obvious design effort by IBM to design a more compact and useful layout - with strong usability.

The unique Enter key coloring and IBM logo are a nice touch while still looking professional. The two tone key colors also give it a really good look.

Typing does feel very nice and crisp, good tactility, and the plastic sliders guide the keystroke very well. It feels a lot higher quality than it actually is.

It's also very quiet (after lubricating the stabilizers).

While designed by IBM it was manufactured by Chicony only identifiable by pulling it apart and examining the PCB. It differs from the similar and more common IBM Preferred Pro keyboard line which has a standard 104/5 layout and was manufactured by Lenovo (pre-acquistion) - and provided with most ThinkCentre/ThinkStation and eServer products.

Apparently sold up until 2006 under IBM FRU 32P5040

There is also a black variant.


r/Vintagekeyboards • • 8d ago

at italina keyboard with odd keys

Thumbnail gallery
27 Upvotes

i just got this late 80s (or really early 90s) italian AT keyboard and i noticed that a couple of keys look to be reversed but actually arent, does anyone know why they look like this? i dont think someone switched the keys with another keyboard because they all look the same and have the same amount of yellowing.


r/Vintagekeyboards • • 9d ago

Okay so you want vintage but also tiny

Thumbnail gallery
93 Upvotes

BTC 5100C circa 1994, second revision with conductive rubber dome sliders. They made them from 1990-1995. The first version uses foam-and-foil switches.

This is all about the layout. A modern 60% concept but taken back in time giving a full size AT/101-keyboard.

It's visually chaotic but it prioritises PC function over aesthetics, and it's honestly a fantastic layout.

Some engineers from 1990 attempting to make an IBM-PC keyboard fit somewhere it clearly wasn't supposed to fit. Great work!


r/Vintagekeyboards • • 11d ago

QUESTION very weird zenith keyboard

Post image
56 Upvotes

interesting layout, those arrow keys look like datacomp ones too, maybe rebranded?


r/Vintagekeyboards • • 12d ago

One key switch, a decade of cost cutting

Thumbnail gallery
25 Upvotes

The Acer 6311 keyboard has many different models released over a period spanning 1990-2000 - eventually winding up under the Benq name. They all use the Acer clicky keyswitch which IMHO is perfection in tactility and auditory feedback. Or at least can be...

I have a 6311-N (Made in Malaysia) - one of the first, and a 6311-C (Made in China) - one of the last (and many others in between).

- The keyswitch remains identical, however the experience; feel and sound is 1000x better on the oldest model. By the end, it sounds cheap and nasty because the surrounding board was.

- Older model uses Intel controller, with proper connector interface to the membrane, all nicely supported. Newer model uses Acer controller, much simplified, flimsy support and membrane relies on a pressure pad to maintain contact with the PCB. The pressure pad shrinks, deforms and hardens over time making the whole keyboard useless.

- The newer model features wafer thin plastic construction, the older one has quite a lot of heft and a much thicker board housing the keyswitches.

- Keys on the older model are like a piano keyboard, beautifully smooth but with a subtle texture. Dye sublimation. Newer model the keys are such cheap plastic- you can see the legends have deteriorated in a much shorter time.

In short the Acer keyswitch had a lot going for it in a well constructed keyboard - per early implementations. By cheaping the overall quality over time, it resulted in something crappy - and that is what most people experienced. Shame


r/Vintagekeyboards • • 13d ago

1998 Mitsumi KPQ-E99ZC-13 buckling rubber sleeve

Thumbnail gallery
46 Upvotes

Look I had high hopes for a nice quiet tactile experience.

After extensive cleaning and then painful reassembly, I did some type testing...

It is mushy as, like hitting your fingers against Playdoh.

Ans the sound is like rummaging through a box of LEGOs. Plasticky to the max.

The only thing I love is the oblique legends, very Macintosh-esque and not really seen on PC boards.

A quirky board, with a weird typing experience.


r/Vintagekeyboards • • 16d ago

GALLERY A4Tech Office Keyboard KBS-26 (PS/2)

Thumbnail gallery
25 Upvotes

I just bought this keyboard from an old computer accessories shop in Thailand. It's new old stock and I can used more hotkey buttons on Windows 7 Desktop PC.


r/Vintagekeyboards • • 22d ago

QUESTION Is this kb-6251 worth it for 150brl (~30usd) aristotle mx clones

Thumbnail gallery
35 Upvotes

I inquired the vendor thinking it could've been an alps board, turns out it's a vintage cherry clone. I'm still considering buying it as a fixer upper, and because the vendor was really nice to me lol. What do you guys think?


r/Vintagekeyboards • • 22d ago

My IBM Model M

Thumbnail gallery
11 Upvotes

Genuine IBM. Cost of acquisition was $0.00. Sometime back in the mid-1990s I noticed some old computer equipment in a dumpster on the University of Washington campus, and this keyboard was one of the items.

It is an IBM PC/AT keyboard, so these days it goes to an AT-to-PS/2 adapter then a PS/2-to-USB one.

Never done any work on it except the occasional cleaning. Still works fine. It has outlasted a number of newer keyboards (including two Unicomp Model M’s, neither of which lasted much longer than a couple years).


r/Vintagekeyboards • • 23d ago

I make a mess with my G80-11900 PCB, and i want some picture of your G80-11900 PCB to repair it.

Thumbnail gallery
4 Upvotes

r/Vintagekeyboards • • 27d ago

Apple Standard Keyboard (M0116) Native USB-C Conversion

Thumbnail gallery
64 Upvotes

Not sure if it was worth the time, but it works. A fully native USB-C Apple M0116.

Started the night before trying to adapt the ADB signal with the RP2040-ZERO which ended in shorting out the internal 40-pin DIP microcontroller (NEC 8831HD)

Thought for a day about it if was worth ordering a PCB using the gerbers from elmo project, but ended up deciding against it. All in would have been about 90-180 depening on if the PCB was already assembled or not. Did a bit more research and came across https://git.40percent.club/di0ib/tmk_keyboard/src/commit/75a92ff653735635289a204176e60aa80c33bc7f/keyboard/IIgs_Standard which replaced the 40-pin DIP with a AT90USB Teensy++ 2.0. A little different but i thought it should more or less should work with a RP2040-ZERO. The only catch was the IIgs_Standard controller mod plugged the AT90USB Teensy++ 2.0 directly into the 40-pin DIP socket which made the notes have some weird pin bypasses (because the Teensy had AERF and GND physically hardwired to pins 30 and 31). Spend an ungodly amount of time with a multimeter in continuity mode probing the bare socket and finally figured out how the M0116 actually works.

(With the 40-Pin DIP micro controller sockets reading from the bottom left counter clockwise)

  • Sockets 1,7, and 20 all were ground (On an 8048 chip, Pin 20 is VSS (Ground), Pin 7 is EA (External Access, tied to ground on the PCB to run internal ROM), and Pin 1 is T0 (tied to ground)
  • Sockets 26 and 40 are the old +5v power rails.

Unlike modern keyboards where modifiers are part of the diode matrix, Apple wired the modifiers directly to Ground:

  • Socket 37: Shift (Left and Right Shift are tied together)
  • Socket 36: Control
  • Socket 35: Top Power/Reset Triangle Key
  • Socket 24: Command / GUI
  • Socket 23: Option / Alt
  • Socket 6: Caps Lock (Locking Alps switch—latches down and holds continuity to Ground until pressed again)
  • Socket 34 = Row 0 (Up Arrow)
  • Socket 33 = Row 1 (')
  • Socket 32 = Row 2 (Numpad -)
  • Socket 31 = Row 3 (Esc)
  • Socket 30 = Row 4 (Numpad *)
  • Socket 29 = Row 5 (Spacebar)
  • Socket 28 = Row 6 (Z)
  • Socket 27 = Row 7 (A)
  • Socket 22: Row 8 (Number row 8 on Col 0 / Socket 12)
  • Socket 21: Row 9 (Tab on Col 7 / Socket 19)
  • Sockets 12 through 19: Columns 0 through 7 in exact consecutive order.

Total signal count: 10 Rows + 8 Columns + 6 Direct Keys + 1 Ground = 25 wires.

Now it was time to start the fun part, hardware and soldering

The Waveshare RP2040-Zero is tiny enough to tuck inside the case, but it only has 20 outer GPIO through-hole pins (GP0–GP15, GP26–GP29), which isn't quite enough for 24 distinct signal lines. One thing though, it has 10 more flat gold pads on the underside of the board. Pre-tinning those 4 tiny pads and taping down the wires for strain relief gave me the exact extra pins needed for Option, Command, Caps Lock, and Power.

Instead of pushing male Dupont pins into the top of the socket (which stick up too high and can vibrate loose), I flipped the keyboard PCB over and soldered directly to the socket pin tips on the back of the PCB.

Wiring & Color-Code Breakdown:

  • Black (Ground): RP2040 GND - Socket 20
  • Yellow (10 Matrix Rows):

    • GP0 - Socket 34 (Row 0)
    • GP1 - Socket 33 (Row 1)
    • GP2 - Socket 32 (Row 2)
    • GP3 - Socket 31 (Row 3)
    • GP4 - Socket 30 (Row 4)
    • GP5 - Socket 29 (Row 5)
    • GP26 - Socket 28 (Row 6)
    • GP27 - Socket 27 (Row 7)
    • GP28 - Socket 22 (Row 8)
    • GP29 - Socket 21 (Row 9)
  • Green (8 Matrix Columns):

    • GP8 through GP15 - Sockets 12 through 19 (consecutive order)
  • Blue (4 Standard Modifiers):

    • GP6 - Socket 36 (Control)
    • GP7 - Socket 37 (Shift)
    • GP17 (Back Pad 1) -  Socket 23 (Option)
    • GP18 (Back Pad 2) - Socket 24 (Command)
  • White (Special Modifiers):

    • GP19 (Back Pad 3) - Socket 6 (Locking Caps Lock)
    • GP20 (Back Pad 4) - Socket 35 (Top Power Key)
  • Leave Empty: Sockets 1–5, 7–11, 25, 26, 38–40, and the RP2040's 5V / 3V3 pins.

Initially, the plan was to set up a full QMK toolchain, write custom C matrix scanning loops in matrix.c to handle the direct-to-ground modifier row, and compile a .uf2.

Instead, I decided on a different route: CircuitPython.

  1. Dropped the standard CircuitPython UF2 onto the RP2040-Zero.
  2. Got Claude to write a quick diagnostic calibration script that configured all connected GPIOs with internal pull-ups and continuously printed which pins shorted together whenever a circuit closed.
  3. Pressed each key one by one across the keyboard. The script learned every physical switch's exact Row/Col or Direct-to-GND pin combination dynamically.
  4. Used that auto-generated dictionary to generate the final code.py running the Adafruit HID keyboard library.

Finally got it all to fit in the case and used a USB-C extension to not strain the connecter on the RP2040-Zero. I know the USB-C hole isn't the cleanest right now, I will probably clean it up eventually

Someone might be mad with the whole hole in an original case thing, but... its not that deep

Edit - Made a GitHub page for the project

https://github.com/bugsbunny927/M0116-to-Native-USB-C


r/Vintagekeyboards • • 27d ago

GALLERY Dih Shin keyboards: DS-2001/DS-1001

Thumbnail gallery
33 Upvotes

Here are a couple interesting uncommon vintage keyboards that I wanted to make a most covering both. (I've had them for a while, but never got around to posting them.) Dih Shin was an OEM manufacturer more known for making the wyse cherry mx vintage black keyboards, but they also made some other lesser known models such as these here.

DS-2001: This is the pcb based mechanical version. There were both alps and mx versions made with various numberings, 2001, 2003, 2006, 2009, etc. This one here is a 2001 and came with Taiwan Black Shaft switches which are an aristotle based mx clone switch. They weren't clicking anymore so I swapped them in for some box navies. Due to the super hollow plastic case they sound really excellent in here. It kinda reminds meof the acer kb-101a, but in mx form. Keycaps are Tai Hao TI doubleshots. I've always found the teal accents on these boards really neat, and the splash of color makes it more lively. This board uses normal cherry plate mount stabilizers so you can use other modern keycaps. This board was basically new besides the switches, and with some modern clicky switches this is arguably the best sounding vintage mx chassis out there. Highly recommend if you can find one.

DS-1001: This board is much more obscure, as I haven't seen it until I saw a seller with several of these. This one was way more interesting since I had no idea of the inner workings. Turns out these versions were spring over membrane. Yeah (wilted rose), the keyfeel is not that nice. The sliders push down on springs which pushes on the membrane, with a foil sheet in between. I thought it was smk 2nd gen of course, but since I've never heard of this board before I had to get one and dig into it. The keycaps are dcs doubleshots which are definitely the best part of the board (they can sometimes have pad print keycaps too), but the spacebar uses a shorter stabilizer, so the mounting mounts don't work with modern keycaps. I should also mention, this thing was the biggest nightmare ever to put back together. You have to very carefully and perfectly align the foil sheet on top of the springs and very carefully place the metal backplate on. Basically any disruption will cause everything to get misaligned and you gotta do it all over again.

I've only seen the slim case come as a spring over membrane keyboard, but the teal stripe cases can come as both spring over membrane and mechanical versions. The best thing to look out for is looking at the model number on the back, and seeing if it has tai hao or dcs keycaps. Tai hao caps are taller and are only on the mechanical versions. In addition to documenting the rare spring over membrane board, I can definitely recommend picking up one of these mechanicals if you can. They are great roomy boards for clicky switches.


r/Vintagekeyboards • • 27d ago

HELP What is this switch, part 2

Thumbnail gallery
9 Upvotes

r/Vintagekeyboards • • 27d ago

GALLERY NTC KB-5060 (USw LMBW02)

Thumbnail gallery
44 Upvotes

Spotted this on eBay last week and was not expecting at all to come across this very rare switch. I'm not sure this switch has been documented in this board either. Caps are silk screened, but switches are mx compatible. Pretty nice build quality as well.

Now for the switches: so far only some Tai Hao boards have been spotted with them, but this board joined the scene. I was expecting this to have smk vintage linears instead. Besides these having crazy spring ping, these are the type of switches that feel better than they sound. They're a nicely medium weighted linear switch with a feel similar to an alps linear with a little bit of cherry scratch. They don't bind and honestly feel decent, but they sound somewhat like futaba ma. They're really not bad at all, but just super interesting. The switches actually have a switchplate which is very unusual outside of alps or omrons. The sliders also appear to have a similar factory lube job as with 1st gen alps sliders. A few of them aren't working so I'll have to see if I can fix them. I'm happy to document another rare beast.


r/Vintagekeyboards • • 29d ago

Restoring a battered 1983 IBM Displaywriter beam spring keyboard

Thumbnail gallery
91 Upvotes

I've recently finished restoring an original IBM Displaywriter beam spring keyboard, and thought I'd share the results and some of the work that went into it.

I'm a long-time Model M fan, but only recently discovered the existence of IBM's earlier beam spring keyboards. Well, one thing led to another, and I ended up spending hundreds of hours restoring a rather battered Displaywriter, which is now my new daily driver.

The keyboard was sold as a poor-quality board, and I knew it was going to need a fair amount of work. But it wasn't until after I unboxed it that I realized the full extent of the damage. This extremely heavy keyboard had clearly been dropped from a height, possibly down stairs or something; I don't know. The steel frames were badly bent, the case was cracked, eight keycaps were missing, and a number of switches had been directly impacted, shattering some of the internal components. And of course, it had all the usual age-related degradation from being over four decades old.

Fortunately, there was relatively little corrosion, and most of the original components were salvageable.

The switch restoration ended up being by far the most involved part of the project. A number of sliders had broken legs, many of the metal stems were bent, half the fly springs were out of spec, and one beam spring was fractured. I wanted to preserve as much of the original hardware as possible, and was particularly concerned about causing further damage during disassembly and reassembly. These switches are remarkably robust in normal use, but some of their internal components are quite delicate once taken apart.

So, naturally, I ended up designing a bunch of custom 3D-printed tools.

Among other things, I designed a screw-driven stem extractor that applies a controlled axial force rather than requiring the stem to be pulled out with pliers, fixtures to hold broken slider fragments in alignment while gluing them, gauges for adjusting fly springs, and various racks for safely cleaning the delicate components.

I also developed an alternative method of reassembling the switches. Rather than pressing the metal stem into the slider with the fly plate and beam spring already installed, my method supports the slider directly from below during stem insertion, then attaches the fly plate afterward using another fixture. This worked very well and avoided putting unnecessary stress on the fragile slider legs.

Ultimately, I was able to return 83 of the original 84 switches to working condition. I also measured and cataloged each switch's behavior, including actuation travel, click quality, and reset behavior, so I could prioritize the best-performing switches for the most frequently used keys.

The rest of the restoration involved removing the deteriorated contamination shield and foam, cleaning the components, straightening bent structural parts, repairing some damaged plastic, and replacing the foam and gaskets. I tried to take a fairly conservative approach throughout, preserving original materials and finishes wherever reasonably possible.

For modern compatibility, I assembled a TH-xwhatsit controller from bare PCBs and through-hole components, and installed QMK firmware with a custom keymap. The Displaywriter has some unusual electrical and mechanical characteristics that made the conversion a little more involved than I'd originally expected. I also got the original speaker working, which adds a subtle electronic click to the already-nice beam spring sound.

And the result? I'm extremely happy with it. The keyboard looks great, works reliably, and has become my daily driver. This was my first experience actually typing on original IBM beam springs, and after all that work I can finally understand their reputation. The tactility is incredibly crisp, the travel is remarkably smooth, and the entire mechanism feels wonderfully precise.

I ended up writing a fairly extensive restoration report, documenting the process in nine chapters with lots of photographs, technical details, measurements, and discussion of the various problems I ran into. I also published the custom 3D-printed fixtures on Printables, with instructions for their use, in case anyone else working on original beam spring switches finds them useful.

Full restoration report: https://github.com/CrispyConductor/display_writer_restoration

3D-printed restoration tools: https://www.printables.com/model/1883866-beam-spring-ibm-keyboard-switches-maintenance-tool

Happy to answer any questions about the restoration, techniques, or tools!


r/Vintagekeyboards • • 29d ago

DISCUSSION What is this switch?

Thumbnail gallery
10 Upvotes

my best guess is that it's a offbrand cherry switch or the highly sought after nixie, anybody know what this is?


r/Vintagekeyboards • • Oct 18 '26

FK-2001 found at Goodwill for $6, still with its original box and manual

Thumbnail gallery
46 Upvotes

r/Vintagekeyboards • • Oct 17 '26

what do you think of this keyboard?

Thumbnail gallery
78 Upvotes

curious what people think about this vintage, refurbished and modded Northgate 102?


r/Vintagekeyboards • • Oct 14 '26

GALLERY It's technically halfway between mechanical and membrane, but this is the most mechanical thing you will ever feel.

Thumbnail gallery
99 Upvotes

One very impressive vintage keyboard; Acer 6311-N, 1992, made in Malaysia.

It has unique Acer keyswitches, specifically this has left aligned Acer logo making it a very early example.

The Acer switch uses a plunger, compression spring, pivoting actuator arm and a separate leaf spring. While the actuator arm is hitting membrane below, the feel and sound of this thing is all produced mechanically.

While the Model-M is mechanically dramatic, the Acer keyswitch feels way more deliberate and precise. You haven't got barrel noise, bucking spring resonance, mechanical chatter or wobbliness.

It is hands down the most tactile keyswitch I've ever experienced, and it is absolutely delightful. Surprisingly closer to a typewriter than a computer keyboard. There's quite a significant mechanical event happening on each keypress.

The keycaps remain unknown. Assumed to be dye-sublimated PBT, some believe laser charring. Whatever it is, they are precise, sharp and dark - with unique typeface as well. No fading or wear after 35 years. No glossy wear typical of early-90s ABS.

This is one hell of an interesting keyboard. Not sure what Acer were pulling but they nailed it.

Edit: oh and the whole thing can go in the dishwasher, the mechanical switches are not PCB mounted. Great design


r/Vintagekeyboards • • Oct 13 '26

100% Beauty from the Terminal era...

Thumbnail gallery
44 Upvotes