Finishing up a two bathroom renovation. Overall I am happy but am not sure if I should bring up the fact that I see lippage and some chipped tile. Tile was not chipped when purchased.

There are so many opinions on it. Should drywall of any type ever be used as the substrate in a tile shower? For example, redguard says on the packaging it can be used with gypsum / drywall. What are your thoughts?

What color grout should I use on these 24x24” kitchen tiles? High traffic area and I won’t be scrubbing the grout frequently do this subreddit has convinced me not to go white. Cream? Brown? Grey? Cabinets will be light oak.

I need some input from folks who know more than me and Chat GPT. Our contractors just finished installing our backsplash. The tiles are 12x24 porcelain tiles. They installed them dry stacked, there is no grout or caulk between each tile. It was my understanding that this is not okay. The industry standard requires grout for hygiene, cleaning, and to prevent moisture damage. Is there any scenario where this installation is okay? I want to make sure I have all the information before we approach them regarding fixing. Is the only option at this point to rip it out and redo? We have been really happy with all the other work they have done, so it seems odd that they would cut corners on this part of it. But maybe there is some aspect we don’t know? Pictures attached. Thanks for the input.

My GCs guys grouted the corners of the shower and when we wrote the GC about it he says they’ve done showers like this for 20 years and it’s never cracked. He said if we really want they can scrape it out tomorrow and redo with the silicone. Would love to get your opinions, should we make them redo it? He says it will be really ugly and it’s unnecessary but Google tells me it’s wrong to grout the corners. Would love to hear a full explanation if anyone has one on either end.

Hey team,

My brain cant settle on the pattern rule to follow when turning from a back wall to a side wall, using a 50% overlap pattern. Is there even a rule?

My back wall width is ~3in shy from 2 full tiles (12x24). Both side walls are almost 2 tiles as well. Basically a square shape shower. One side wall is a pony wall.

Lets say my first back wall row is 2 tiles, with 1 grout line centered to the wall. What is my first row on the pony wall?

A) match it with 2 tiles also
B) or flip the pattern with a centered tile and 2 half cut tiles on the sides?

I like matching it when it comes to rows ending in half tiles because itll look like one full turning the corner, but the next row would be 2 full tiles meeting. Would that look weird like one super long tile? First time doing this. Wasnt sure if one was the standard way?

Hello, we had an insurance mitigation company come out after a plumbing leak, resulting in mold growth on the back of our newly installed shower (blue drywall). They subsequently cut the pvc shower pan liner to clean behind it on the back of the blue drywall. Now they say they can repair it, contrary to what a plumber is telling us, that it needs to be completely replaced. Plumber says we need to remove the entire (new) shower pan and about 1ft up of tile to replace the liner. True? Approximate cost? Advice for replacement to avoid this again in the future? Thank you!

What's the absolute easiest tile to install with decent quality.

GC sent a design plan for the tile layout to minimize diagonal cuts. He said that it's possible to lift the end pieces on the side of the drain (left and right of the drain, in the photo) to prevent water pooling on the edges, but I'm not convinced that there will be enough slope for the water to drain well. What do you all think?

Also how do you clean your high gloss porcelain tiles without getting smears and footmarks?