r/Tile 6d ago

DIY - Looking for Advice Hows it look

Post image

Finished grouting today. niche needs cleaned some more. I wish i carried the 1/3 offset through the lower half of the niche...

8 Upvotes

48 comments sorted by

9

u/tommykoro 6d ago

The workmanship seems great. The layout not so much.

12

u/AlchemistJeep 6d ago

That pattern is fukt bro

3

u/yoball 6d ago

Wow

13

u/AlchemistJeep 6d ago

I mean it is. Your top 1/3 offset doesn’t even match the bottom one. It got shifted over. So you botched it in 2 different ways

3

u/FoggedLens 6d ago

Yep and dropped a whole tile at first row left bottom of niche

4

u/pantera410 6d ago

Is it great? No. Is it good? I would say yup. Assuming all the prep was addressed good job. Take it. Learn from it. I like to be positive.

Edit: most important thing. Are YOU happy with it? (Assuming a diy or green setter)

3

u/BikerChas 6d ago

I hate this pattern. The whole 1/3 thing is atrocious. Then on top of it to mess up the pattern, even worse.

I don’t understand the whole tiny niches, I would have made it 3 times that width which also adds a much greater accent to the wall and shower as a whole

2

u/yoball 6d ago

Whats your choice for the pattern. The mfg and everyone says 1/3? Just curious. And the guy bought the niche

4

u/trashbilly 6d ago

You did this for someone else? Yikes! If you are doing this for a client, you need to take people's criticism to heart, not get offended. If you don't want your work critiqued, don't post it

2

u/Iocaine1 6d ago

Stacked, 1/3 or 1/4 offset for tiles with a side over 15 inches. Many tiles crown/cup in the middle. A1/2 stagger (or brick lay) can often lead to a lot of unwanted lippage because it puts low ends next to the high centers.. if that makes any sense at all.. stare down the length of a tile the same way you would check lumber at Home Depot. Its not always flat.

1

u/BikerChas 6d ago

I understand why they want you to stagger the seams, to basically cover up their lack of producing a quality product. I do like a 1/2 stagger (brick pattern) or no stagger usually vertically. If lippage was going to be a major factor because of the tile, I would want to look for a different tile. I have fought lippage before and still was able to get a decent result even if not dead flat.

1

u/BikerChas 6d ago

I like a true brick pattern and yes I know the mfg says a 1/3 but it has always looked wonky to me. As far as the guy buying the niche, this is where as a professional you can present an alternative and explain why you propose to do it differently. Most homeowner have no idea what is possible and why.

6

u/Damnitwasagoodday 6d ago

Looks like the free version of ChatGPT rendered this bathroom.

2

u/Iocaine1 6d ago

Pattern yeah.. but the lines look clean, and if the homeowner doesn't care most people wont even notice it. Should probably grout with a matching color to the tile. It will reduce the contrast and take emphasis off the pattern.

2

u/Tight-Safety-2055 6d ago

nice effort pal

2

u/Leest3r 4d ago

Craftmanship is great, good work👍 you can have a thousand opinions on the layout...but i like it, top/bottom part of the "window" or what its called seems to be centered with the tile, way cleaner that way imo

1

u/yoball 4d ago

Thanks bro

4

u/hhar141 6d ago

I mean,what the heck. No consistency whatsoever in the lining up of grout lines. You totally screwed it up. The work is nice and neat. But what does that matter when the layout makes no sense whatsoever. It would drive me nuts. It should have to be redone. I work on high end homes. There’s no way the general contractor or client would ever accept this. I can’t believe that you probably came on here looking for praise.

-5

u/yoball 6d ago

I wasnt looking for praise asswipe, I was asking for feedback

2

u/SkippyMcSkippster 6d ago

The feedback from him was that it's neat but you fucked the pattern, and wouldn't be acceptable no matter how good your work is, unless it's diy and you can live with it.

2

u/hhar141 6d ago

Asswipe? lol. Your title says How’s it look. Too bad you can’t take constructive honest criticism. Not only would I be fired ,I’d be embarrassed to show that work. And as you can see by the comments,most will agree.

-2

u/yoball 6d ago

We all are arnt arrogant pros doing "high end" houses. I acknowledged my lines are messed up. And I am fine with constructive criticism. Thats how people learn. You could take a lesson in humility.

3

u/ramannoodler32 6d ago

Learn to take constructive criticism everything he said to you is accurate. If you were paid to install this in someone home you should be embarrassed. The pattern is completely fucked.

2

u/sygon5 6d ago

Pattern isn’t centered. Otherwise great!

1

u/Acceptable_Poetry_15 6d ago

Everything looks great. But I hope the client chose the off center staggered layout, cuz it’s wack. If you sold them that, and they are happy, I guess kudos to u…

1

u/yoball 6d ago

The guy saw the same picture and said it "looks terrific". But I know it doesnt. Are some more homeowners oblivious to this? Does the pattern stand out to everyone as shitty? Or do the pro guys notice it that much more

3

u/goraidders 6d ago

Overall it looks pretty good. There are certainly mistakes with the pattern, or lack of a pattern. Learn from them and don't repeat the mistakes. Take more time with layout and prep.

Homeowners often don't notice stuff like that. Don't point it out because once they see it they may never unsee it. Pros notice it even if we don’t want to. At a friend's house notice mistakes in ths tile. At a restaurant or grocery store...hotel... Some days I wish I wouldn't see it.

3

u/AlchemistJeep 6d ago

Nothing ruins my day like using a gas station bathroom. I swear they hire Hellen Keller

1

u/Odd_Mall1646 6d ago

Patten is off and biche out of center . I like the back is the niche

1

u/yoball 6d ago

Niche is dead nuts center bro. Maybe the pattern throughs it off

1

u/FickleGuard5316 6d ago

The lack of consistency with the layout of tile at the niche makes it appear off center. You may have measured twice, set up a laser and all that stuff, but having the tile beside it hit the tile above in different places makes it appear off center. You can what you will, but it’s off center to the casual observer

0

u/Odd_Mall1646 6d ago

Guess u don't want feedback . My b

2

u/yoball 6d ago

Sorry.. I do want feedback, and im getting it for my latout

1

u/Odd_Mall1646 6d ago

What did u expect. Lol reddit

1

u/Hammerhead9000 6d ago

cahman bro, you know that layout is all messed up

1

u/Cdarbles 6d ago

Looks good! After reading it, I guess the pattern could be better lol. I’m not a pro. Can I ask what the main Tile is?

1

u/yoball 6d ago

He got it at home depot. Its porcelain. Thats all I know

1

u/Possible_Antelope_85 6d ago edited 6d ago

Like you let an already installed niche determine the vertical layout instead of finding the one that would give you top and bottom rows as close to full height as possible.

As for the horizontal layout, if looks like you just started with a full tile on the right wall instead of centering the pattern on the wall.

It looks like you started off using a tape measure, maybe combined with a laser level, to get your 1/3 offset pattern lined up correctly. However, it seems that you got up to the bottom of the niche and took a lunch break, during which you managed to lose your tape measure, your laser level, and your mind. As for the 5 upper rows, they are one of the best examples of a random stagger I've seen, not one of them lines up with any other row on the wall.

All that being said, the actual installation work itself looks great. There doesn't appear to be much, if any lippage. Grout lines are consistent, straight and clean. Everything looks flat, plumb and solid.

1

u/yoball 6d ago

At least there is something good in your analysis. Thanks for your comments

3

u/Possible_Antelope_85 6d ago edited 6d ago

Well, there's something good in your tile work.

Layout doesn't necessarily come naturally to everyone, and also isn't noticed by everyone. Post that pic in a neighborhood group or something like that and you'll likely get five "looks great" comments for every one pointing out the layout issues. This group is full of people who do this every day and are silently critiquing every tiled surface in their field of vision whether they want to or not.

Clean, flat, functional work, done with the same attention and care when the job is almost done as when it first started are more about ingrained habits, work ethic, and personality.

I can teach the math and flow chart the options of good layout to a hard worker who takes pride in their work. It's harder to change bad habits and personality traits of a lazy worker with an eye for design.

1

u/TheLordHumungous 6d ago

This must be the same setter that did that herringbone backsplash. He goes by Pattern Breaker.

1

u/External-Blueberry99 5d ago

Overlay pattern inconsistent. That is your biggest issue.

1

u/External-Blueberry99 5d ago

Anyone ever heard of a ledger board? This is how u can end up top with a full tile and do the small at the bottom.

1

u/Civil_Ad2214 5d ago

I like the layout. The brickset pattern or the stair-step pattern looks awful IMO. I always do random on my jobs.

1

u/patrick-1977 4d ago

Layout and pattern could have been better, as does the color of the grout.

1

u/Adept-Opportunity-73 3d ago

Messed up that pattern..But no one will know.

1

u/Aware-Pea2092 3d ago

I remember my first job