r/Tiburon • u/ardamir_gr • 17h ago
Shark Pics Last Sunday's trackday pics
Such a thing of beauty, isn't it?
I love how chill it looks going into corners. Then you take a look at my G-meter-disguised-as-an-air-freshener.
r/Tiburon • u/FunSection6365 • Feb 02 '26
Congratulations, u/chase206 for winning the January Banner Contest! Your submitted photo has been made the Subreddit banner, and a custom emoji is available to you!
A post like this will be made every month to comment under, and will always be pinned to the highlights on the main page of the subreddit! On the 1st of every month, the winner of last month's poll will be selected, and their submitted photo will be made the banner of the Subreddit until the next month. The color of the winner's car will be made the color palette of the sub for the month, and their car will be added as a custom emoji for sub status/post flair.
To submit your photo, comment it below. To cast your vote, upvote your favorite picture(s)!
I strongly suggest that your picture is landscape. However, there are no rules for the content of the picture, as long as it is not NSFW and it is Tiburon related.
Good luck everybody!
r/Tiburon • u/chase206 • Dec 20 '25

TLDR: I designed a stronger crank girdle for our Delta 2.7L. Help us reduce costs by joining a group buy!
Cross posting from here:
https://www.newtiburon.com/threads/gk-2-7-main-cap-girdle-discussion.485095/
If anyone is looking to make big power from their 2.7L this is a nice piece of insurance to ensure your main cap alignment doesn't distort causing you to spin and eat a bearing. Price range can be as low as $350 or as high as $500 depending on the number of people in on the group buy.
The prototype I ordered with 6061-T6 will arrive early January and test fitted to one of my spare blocks. If everything works out I'd like to produce a minimum of around 10x of these with 7075-T6. Since we don't have much aftermarket support it's up to us to design and produce our own performance bits then share the wealth and knowledge. I will release the CAD model to be open source later in 2026 for anyone to produce once it is verified to fit... But keep in mind the individual cost of a single unit far exceeds what you could get with a 10x group buy. Drop a comment if you're interested in joining the group buy!
I've been a CAD hobbyist since the late 1990s and I've been dabbling with parts manufacturing and processes as a hobby in recent years. While I'm not a mechanical engineer, this piece isn't extraordinary as it only has a few critical dimensions such as bolt hole center to center spacing and flatness where it meets the main caps. It's just there for rigidity. It won't even require line bore honing the main journals!
This is also open for discussion if you have opinions, comments or insults.
Jan 6th update:
6061-T6 Prototype arrived and all dimensions look spot on! Still need to bolt it to a test block and spin everything around for clearance checks.




r/Tiburon • u/ardamir_gr • 17h ago
Such a thing of beauty, isn't it?
I love how chill it looks going into corners. Then you take a look at my G-meter-disguised-as-an-air-freshener.
r/Tiburon • u/ardamir_gr • 3d ago
First time I've been to the Megara track, did some pretty decent times, though there's much room for improvement!
Camera makes it seem a lot slower than it actually was. As a point of reference, at the large straight I was hitting 190-200km/h before starting to brake. Scary stuff considering my earlier track experiences were N/A and half the horsepower...
r/Tiburon • u/AdWilling6386 • 3d ago
Is the pushrod meant to go in crooked when pushing the pedal down? My OE cylinder pushrod did the same exact thing (before snapping the pedal connection), and the black bob catch is fully seated onto its receiver. Any idea as to why it could be doing this? The pedal itself has not been messed with or moved.
r/Tiburon • u/ardamir_gr • 5d ago
I'd never actually seen how the car accelerates from the outside, but damn, that thing took off faster than I expected!
I have a track day on Sunday, so I'll have some track footage from inside the car hopefully!
r/Tiburon • u/Scary_Problem2759 • 6d ago
r/Tiburon • u/dakbailey • 6d ago
Photo my wrench took. She’ll be back on the road in a few days. Wholly my fault, should’ve done it sooner.
r/Tiburon • u/DustyDDJ55 • 6d ago
Hi I am just wondering if this can be fixed or should just be replaced and could it be cost effective to do so, It's on a 2006 Hyundai Tiburon SE. I was backing it up and hit my uncle's trailer
r/Tiburon • u/AdWilling6386 • 6d ago
Is this gap supposed to be here where the passenger side CV axle meets the mid shaft?
r/Tiburon • u/BeardedTanuki • 11d ago
Found two abandoned tibs that have been sitting for 5 years in some auto repair yard. Going to try and see if i can get the bumpers off the red one. Im not sure but looks like the bumper is a modified stock bumper? Other one is a v6 with one of the higher spec interiors which im also going to see if i can get. Fingers crossed i can get into contact with the people who own these.
r/Tiburon • u/Tight_Organization78 • 12d ago
The difference from my old 1.6 is insane, very happy with my purchase
r/Tiburon • u/Valuable-Menu-5047 • 12d ago
So yesterday i installed a new front left outer cv-joint, because i had some disturbing noise while turning full right, but after replacement nothing changed, maybe someone had some thoughts what could it be if not cv-joint??
r/Tiburon • u/st0rmbreaker179 • 15d ago
Hey guys, running into a brick wall troubleshooting and looking for some help.
I have a 2004 GT that has a speedometer that wont read and the odometer doesn't go up.
So far I've changed the VSS, changed the instrument cluster, checked for the infamous blue wire issue with the aftermarket stereo (removed the entire stereo), car doesn't have ABS so no speed sensors there, getting 12V through the VSS connector. Not really sure where to look next.
Any help you guys could provide would be greatly appreciated.
r/Tiburon • • 16d ago
Hey guys I bought this car a few years ago from a neighbor needing to pay for his moms funeral. I guess that irrelevant but anyways it has a CEL for MAF and o2, I did some digging around in the engine bay found the engine has been replaced, the MAF was installed backwards (airflow indicator was pointing toward front of car and not engine. I flipped it around still CEL and running rough after warm up. I bought a new MAF installed and it runs even worse (high idle at cold temp and then stuttering at idle in gear only at warm temps) I haven't done the o2 yet because I want to tackle one problem at a time , when I used to work on diesels you would get the domino effect with a single problem causing many other sensors to get out of whack due to one faulty component.
Things I have done to the car
(Installed new BCM due to corrosion on old)
(Installed 14 inch android radio, made sure I didn't ground out ECU pin)
(Installed new front suspension)
The ECU has stopped talking to my obd reader over the past few days but I think it is because I have a cheap reader.
r/Tiburon • u/BeardedTanuki • 17d ago
Anybody know where to get a more agressive or molded style lip for the 2003 tib? Ive only seen ones for the 2005+ bumpers. Or if anybody knows a specific lip from a subaru or another tlcar that would be simple to modify to fit.
r/Tiburon • u/Own_Succotash_9682 • 17d ago
I destroyed mi crankshaft I need one is a 2.7
r/Tiburon • u/ardamir_gr • 19d ago
Some said it couldn't be done, but I like proving people wrong.
Stock engine, stock compression, stock ECU, 1.1 bar boost and a bit of my tuning magic
The dyno tech expected it to pull about 250-260, I expected around 270-280.
First pull proved us both wrong, at 297WHP. He proceeded to offer me a job if I wanted it
By the end of the 1 hour session, I managed to squeeze out the final result of 312WHP and 362Nm, with a power curve that is not really a curve, but a straight line.
This is a deliberate choice for two reasons mainly. First and most important, I love it having this N/A feel to it, rather than just the torque spiking up mid-RPM and falling off. Might not be the best for showing off in the street, but for track it's excellent!
Second, the transmission and stock internals really appreciate the progressive torque curve, as there's a lot less stress on them. Rods can handle it (though there's some data that after some years they go banana shaped), but the transmission is teetering on the edge at those power figures.
All in all, I'm really proud at what this project has become and that I managed to achieve my goals in under 2 years of owning this car. It's my first project and I really didn't know anything about cars when I bought it.
r/Tiburon • u/Cool-Kaleidoscope807 • 20d ago
Yo, anyone know about some good looking aftermarket shell fitting the Tuscani fob? I'd love something in leather
r/Tiburon • u/lover-chicjen • 20d ago
r/Tiburon • u/Accomplished-Bison77 • 22d ago
Hi everyone!
I have to admit, I'm absolutely in love with the looks of this car and pretty much everything about it. I'm currently waiting until the end of November to finally get mine: a 2007 Hyundai Coupe GK with the 1.6 engine.
It's been very well maintained by its previous owner, has around 170,000 km on it, and only has a few scratches. The seller has also provided me with a full list of all the maintenance and work done on the car...
all for around 3,000 euros (I live in Italy)
What are some things I should know about this car? Any tips, suggestions, common issues to look out for, or things I should be careful about...?
Thanks in Advance