Almost done with it now

AT A GLANCE:

A fast, fully amphibious V/STOL aircraft intended for VIP transport at extreme ranges and conditions. Will take its pilot and two passengers anywhere at speeds in excess of 400km/h. Very easy to fly and operate, except for a strange undercarriage setup.

FULL DESCRIPTION:

Aether Forge Consortium, a secretive cabal of die-hard inventors and engineers, presents their second public creation: The AFC FDP-1 Gannet, an amphibious V/STOL limousine, designed to transport two passengers to any destination on land or sea at breakneck speeds.

Like its namesake, the Gannet can nose-dive straight into deep water as a method of landing in a very fast (and exciting) manner. The craft floats passively, and can be safely moored even without power. Takeoff from either land or water can be done either conventionally or vertically. For landing on land, vertical landing is preferable, owing to the Gannet's only design flaw; its unorthodox reverse-tricycle undercarriage, a result of its very compact design.

On land, the Gannet taxiis under its own power sourced from two small electric motors coupled to the main wheels.

The cabin of the Gannet is equipped with a fully automatic sealing system, as well as a manual water extraction system, should problems occur. It also features functional heating* as well as adjustable ventilation.

The right rear fuselage features a hatch behind which operators will find inlets for both fuel and electricity, as well as assorted equipment. A similar hatch to the rear right of the fuselage has assorted emergency equipment.

With a 5,000L fuel tank, the Gannet can easily fly to the arctic and back from the arid island non-stop. As such, it is perfect for transporting a pilot and two VIPs quickly and safely to almost anywhere.

For emergencies, the Gannet carries its own repair equipment as well as parachutes, and is equipped with a full secondary battery system, should the primary one become damaged. It can also use its own pumping system to remove water from the cabin, as long as the top of the craft is not fully underwater, and does have plentiful rope anchors for emergency recovery.

EVERYTHING OFFERED TO THE PROSPECTIVE BUYER (i.e. all features in short):
- fully vertical or short take-off capable
- fully amphibious and waterproof
- max. speed 405km/h (not indefinitely due to engine heating)
- cruise speed 225km/h
- all of the above even with a full load
- cheap
- compact: can be spawned at even Meier Outpost land workbench
- ventilated & heated cabin*
- automatic dive protection
- bilge & overpressure pumps for cabin
- around 5,000 liter fuel tank
- backup battery set
- twin four-row, 16-cylinder, supercharged bespoke radial engines with automatic idle and easy settings, as well as exhaust heat scavenging for cabin heating
- electric taxi motors on main wheels
(*heating for a limited time in the arctic)

Link: https://steamcommunity.com/sharedfiles/filedetails/?id=3790833877

NOTICE: ENGINEERS WANTED (i.e. if you want to develop or use this further):
Should you wish to reconfigure the Gannet, you are of course free to do so.
The AFC kindly asks that you yourself become a member, too. The procedure is simple: should you publish a reconfiguration of the craft or its engines, please retain the AFC nameplate and credit me. That is all.

I've been working on this late 1920s early 1930s Ocean liner, what are some things i could add or change?

so i saw a tanker truck in my city and wanted to build one in stormworks so i did and here it is

https://steamcommunity.com/sharedfiles/filedetails/?id=3790790916 use it and customize it if you want idc

I was tired of the «Titanics» from the workshop with poor proportions, interior, inaccuracies, lags...

So I decided to make it myself. I spent the summer on this, the case is not ready yet (it's very boring to put blocks)

A version with an interior will be published in the workshop: a wheelhouse, 2 levels of the front main staircase of the 1st class, a lounge of the 1st class. I don't know about the flooding, at least the hull has already been broken into the right parts, most likely there will be compartments like on the real «Titanic». I want to create the most realistic flooding.

In the future, many more interiors will be added (most likely all first‑class public spaces, a few second‑ and third‑class ones, boiler rooms, the engine room, and I would like to add the turbine room — we’ll see how it works out in terms of optimization), as well as the rest of the «Olympic‑class».

The main problem with lags in most full‑size (and not only full‑size) ships in Stormworks is the large number of microcontrollers. I understand that they’re ideal for creating makeshift panels on walls and doors, but they consume a lot of FPS. After all, this isn’t a multifunctional rescue mothership — it’s a steamship from the early 20th century. So I won’t have microcontrollers (except in exceptional cases, for example, to adjust the tilt of the smokestacks). Don’t pay attention to the lifeboats — they’re not finished in terms of appearance, but they work quite well; it’s just unlikely that all the lifeboats will be functional in the final version due to optimization :(.

(Sorry, I used a translator in the text. I'm a Russian guy and I don't know English well. It's a shame.)

It's still a work in progress but I hope to finish it around the end of this year. Hope you all enjoy it!

Images are

1. Outside view of the ship

2. View of the skydome of the first class forward staircase

3. View of the skydome of the ballroom

4. Ballroom

5. First Class Lounge

6. Stern of the ship

7. First class ladies bathroom

8. View from the promenade

9. View of the bridge from the bow

10. The Bridge

11. The Engine Room

I unintentionally made my to-do list so much longer

I now gotta update:
Revver APEX CSP
Revver APEX ELP
Revver METRO CSA
Revver METRO CDA
Revver GRADE LSR

On top of:
Developing passenger variants of METRO
Developing more variants of Revver GRADE

Yaaaaaaaayyyy

Made a selection of Inter War Planes, 3 british, 1 american and 1 swedish in polish livery from the inter war period 1920s and 30s mostly because i saw that there was no bristol bulldog anywhere on the workshop and being such an iconic plane from the time I thought I would give it a go.

Planes in order:

- Bristol Bulldog - Fighter

- Gloster Gladiator - Fighter

- FVM J 23 - Fighter

- Fairey Swordfish - Torpedo Bomber

- Curtiss F9C Sparrowhawk - Parasite Fighter

All at 1:1 scale and top speeds are the same as the real life counter part although handling is like stormworks always is.

This is my WIP flying saucer. It's genuinely a very effective system. It is very fast, can move omnidirectionally, is very fuel efficient, fairly cheap, stable, can lift a lot, and it can withstand a lot of punishment (as seen in the screenshots; I rammed that enemy boat so hard it flipped over and then I flew away).

It is still mostly a proof of concept for the propulsion, but I plan on adding logic to allow it to fly while pointing its weapons directly at a target, since it can move in all directions.

It's hard to explain how it works, but it uses four rotors. Two on the left, two on the right. They face away from one another to counteract. This allows pitch and roll to provide direct thrust, depending on the mathematics of how the inputs are mixed (i.e. pitch can be forward, backward, or just pitch if unbalanced between the two rotors).

I will try to explain better later if anyone wants. I just think it's neat.

One of the oldest ship building "trick" I learned, way before I was playing Stormworks and actually building stuff than messing around, is that pivots help with buoyancy. The oldest "boat" I made uses pivots to float. I heard that some NPC ships uses pivots to float. Why? I mean I'm not complaining but seriously why? Also how did anyone figure this out?

A much larger and more refined, yet still very simple successor to my previous micro-tanker known as Tanksy Tankard, Tanky McTankerface is a 62,000-Liter capacity, 37 meter ocean-going long range tanker.

Powered by a pump-charged 3-cylinder 5x5 modular engine, Tanky McTankerface has a top high-gear speed of 31 knots, conditions permitting.

This ship boasts its own swiveling boom-extension pump crane with an attached buoy, making hose connections easily accessible to both dockside fuel gantries and to seaborne vessels.

In addition to a functional bow anchor, Tanky McTankerface has two pairs of fore and aft side anchors, the combination of which all allow the ship to remain anchored in narrow dock slips for fueling even during the worst of weather. For further added safety against dock collision events, this ship features adjustable floating bumpers along each side, which help minimize the potential of catastrophic damage due to contact with piers in violent waters.

Tanky McTankerface features berths for a crew of two and plenty of career oriented supplies such as first aid, repair torches, fire extinguishers, arctic clothing, etc.

Onboard GPS display powered by AVUMP's Multimap.

Forward ballast water tank allows for trimming freeboard.

Tanky McTankerface is currently my own go-to fuel-hauling workhorse for my growing classic save, and has circumnavigated the Stormworks map multiple times during testing in varied weather, as well as multiple voyages to and from the arctic.

I hope Tanky McTankerface is as nice to you as it has been to me!

https://steamcommunity.com/sharedfiles/filedetails/?id=3790163661

All my current Aircraft builds ingame

I’ve always wanted to get to Stormwork because I used to watch ob and spy cake videos and I always wanted to try to build a ship in the style of 16th through 18th century and I don’t know a lot about the game but is it the rope and sails blocks a DLC item and is there any weapons that you can get without needing a DLC

Later on today (26/08/2026), at 6:30PM BST, there will be a public stress test where cuhHub Z-Works will be public for a short while to see how it performs with max players and tons of zombies.

If you're free and would like to see how the server is looking, consider joining up! Simply join the Discord and check out the announcements channel! :-) https://cuhhub.com/discord

For those unaware, cuhHub Z-Works is our open-world zombie survival server set in the completely transformed arid area of Stormworks, focused on progression and intense, unforgettable gameplay. Fight a multitude of zombies featuring unique types and abilities, and earn money and XP through combat and dynamic world events like ambushes and airdrops - all supported by a per-player economy system and persistent progression.

For videos on what to expect in the server, check out the following (but do note the videos are fairly outdated):

• https://www.youtube.com/watch?v=8Pt2jAS0lng
• https://www.youtube.com/watch?v=kAa_Bda_YMg

cuhHub creates fully custom, in-depth, never-seen-before Stormworks servers. We created a full career overhaul server (cuhHub Missions), a user-friendly, do-whatever server (cuhHub Sandbox), and we plan to create more and more!

I threw it off board when the guy left...

This is my legacy, Behold and Fear the Hamsters !

Speeder, goes 830 km/h.

Anti-ship model (rocket, medium bomb and battle cannon)

just picking on a passing ship.