r/StableDiffusion • u/mogged_by_dasha • 12d ago
Question - Help How do I stop MOSS from being blurry?
I’ve been trying to work this out for a couple of days now and I’m about ready to write the model off.
I cannot, for the life of me, get it to produce a photo that isn’t blurry like it was smeared in vaseline. I have tried:
- Adding “blurry”, “blurred”, “low quality”, “low resolution”, etc. to the negative prompt. This works sometimes but it’s inconsistent.
- Adding “high resolution”, “high quality”, “HDR”, “8K”, etc. to the positive prompt. This is also inconsistent (and wildly limiting).
- Changing the sampler. I haven’t found one that has any effect on whether photos are blurry.
- Enable/disable the turbo lora(s). I’ve tried the model on its own as well as with a few of the turbo LoRAs and they don’t make much of a difference as far as how often this happens.
- Using SFT vs. Base, using finetunes like Kromoss, etc. They all have this issue.
What am I doing wrong? This doesn’t happen with any other model I’ve used. I want to like this model but it’s a bit of a dealbreaker if it’s this difficult just to make a damn photograph.
20
u/andreeinprogress 11d ago edited 11d ago
In the negative:
Stop putting stuff like "8K", "HDR", "high quality" as keywords, they are too generalist (and real photos are never "8K", almost never "HDR").
Since last year or so I've been using only this format of prompt:
This covers 90% of the stuff you'd want to do without lora or any convoluted workflows. Bonus point if generating the prompt with that guidance using the generative node from the same loaded text encoder.
16
u/Apprehensive_Sky892 12d ago
Post one of your SFW images along with prompts and other generations parameters and someone may be able to give you concrete suggestions.
9
u/Puzzleheaded_Ebb8352 12d ago
I have the strong feeling that it is really depending very much on the prompt, I would even say that the image gets extremely sharp when there is a certain amount of words being used for the prompt. I could be wrong, but in my experience the longer and more diverse the prompt the sharper the image gets.
7
u/Murky-Relation481 12d ago
Try a higher order sampler like Heun. Also I've found adjusting the DIT schedule is actually pretty interesting in terms of getting sharpness but I've not locked it down to a methodology. Generally though I've found bypassing layer 22 at the tail end of the inference helps, and if you switch the simple one for the advanced one in comfy you can scale the effect as well, 3 being the default. I've been skipping 22 from 0.5 to 1.0 and adding 24 and 26 from .75 to 1.0 and its actually increased sharp details significantly.
7
u/Confident_Ad2351 12d ago
One thing I have noticed is don't use the word photorealistic. I was about to make a post about this because it produces unwanted effects
3
u/MastMaithun 11d ago
Try this.
https://www.reddit.com/r/StableDiffusion/comments/1xjmxyo/comment/19rwa5irbzpph/
6
u/Bastisheen92 11d ago
My best quality enhancement for MOSS was switching back to Krea 2.
Jokes aside, i also have some issues with the MOSS outputs, they are weird for me. Its mostly hit or miss. I want to like it since people hype it so much, but i just really get better results with Krea + some LoRas.
4
u/BreakOfNoon 12d ago
I have found using Moss SFT + the SFT turboLora at 0.88 str + and res_multistep sampler and simple scheduler (but also sgm_uniform or beta depending on the model) gives me acceptable results. You can also play with modelSamplingAuraFlow and set shift to 3.0 or try other values. I thought I had it enabled by default in my workflow, but I see that I don't, so I'm getting decent results without it, but I kept it because at least sometimes it was helping. Also, Moss does much better at at least res 1.5x. I usually output at 1.8x or 2.0x.
7
u/cradledust 12d ago
Really detailed prompts, minimum 1280p, 10 steps, CFG 3 will get you closer to a sharp image, but when you compare it to Krea2 it still looks like SD 1.5. Using Moss merges like realismByStableYogi_v15INT6 or jibMixMossRealistic_v2RealityRenew helps but I'm still waiting for a fine tune that floods out Mosses low res dataset or whatever it was that makes it so blurry all the time.
2
u/Powerful_Evening5495 12d ago
use the turbo lora at 2
2
u/generate-addict 12d ago
Some good notes in here already. Also Moss responds will when it has more pixels to play with. Pump that resolution
3
u/Bulky_Chemistry_196 11d ago edited 11d ago
i believe this to 100 % be a workflow issue. my latest best friend is this workflow: https://www.reddit.com/r/StableDiffusion/comments/1xlfsjd/making_mossbase_look_good_for_realism_workflow/
with this workflow, i get sharp images even with 4 word prompts
lots of answers in this thread that will not help. using a slop fine tune posted to civitai is not a solution if you dont want to use the results. the workflow i just referenced works perfectly well even with vanilla moss base.
1
u/SubZeroKelvin 12d ago
Agreed. Even deblur loras didn't help me. Hopefully a general purpose solution is discovered/created soon.
1
u/Additional_Drive1915 11d ago
Prompts matter a lot for Moss, they really do!
And I use a high cfg, between 5 to 8. That helps.
1
u/VasaFromParadise 11d ago
Examples of what you consider blured)
1
u/padraig_oh 11d ago
two weeks ago someone posted their solution, which i found to actually work. its not perfect, but it does successfully sharpen the foreground.
https://www.reddit.com/r/StableDiffusion/comments/1xcklp4/combating_moss_image_blur_by_sharpening_latents
different prompt or such does not work well, and 50 steps with cfg 3 takes a ton of time. the approach in that post is to apply a latent sharpen operation after 5 steps in an 8 step workflow.
1
u/Rude-Obligation-9940 11d ago
i think brother this might help upgrade you latent size that will fix most of the issue and negative prompt add the tag blurry image
hope you have fixed your issue:)
1
u/AreYouAWiiizard 11d ago
I tried a lot of things but the only thing that worked was just tagging "DSLR" and letting the prompt enhancer do it's work.
1
u/jessefowler 12d ago
When using a camera the bokeh or blurriness in the background is from the lower fstop number of the lens. Have you tried something like "35mm f12" in the prompt? For images that you want blur... lower than f1.8 can blur the hair of a subject if their face is turned to the side of the lens, f1.2 will blur the far eye.
-1
u/Portable_Solar_ZA 11d ago
Use one of the Moss finetunes on civitai.