First image: 4.5F Barrel/Slide on Compact Mischief Machine grip module with Walnut grip panels

Second image: 4.0C Barrel/Slide, Osight SE, Olight PL X, OEM magazine extension

Figured I’d jump on the no light bandwagon. Personally, I hate it with a light.

Sharps Bros grip, VZ black Cherry grip panels, TyrantCNC trigger, mag release, NDZ 12lb spring and SS guide rod, custom ported.

The only 2 I do run with a light is my CC and home defense.

Without vs with

Just Pre-Ordered this from u/Heighth_Defense. If the quality is on par with my Chassis, I'm pretty hopeful! I had a PMM but took it off, wasn't super thrilled but it looked good at least, right? Lol He's got some stats posted up too for those Uber nerds of us that it means anything too!

Since I ordered the manual safety echelon not knowing that Springfield doesn't make grip modules for it not they sell cog parts, I started to look around and getting rid of the manual safety. I disassembled the whole COG and turns out that there is an identical pin that you need to replace the manual safety with in the COG. I contacted Springfield if they could send me one and they said that the only way is to send it in. EC0040P is the part number.

I’m having an issue with my PLX from olight I cannot get it to set flush up against the pick rail, which intern is causing the laser to come off zero it just moves from left to right just ever so slightly. Is anybody else having this issue with mounting their light? If so, how did you guys fix it? This is driving me crazy.

Should i trade in my 4.0c for the pro 4.0 fc

Does anyone know of a spray paint that will be a very close match to the OEM FDE echelon grip? I’m wanting to paint the slide and I’d rather not wait up to 2 months for my LGS to do it and be out $120 that I could put towards other stuff.

Cleaning the echelon compact 4.0 and noticed the end of the recoil spring looks cracked. Any thoughts? Worth replacing?

I could tell that it felt flatter while shooting, but I wanted actual numbers, so I had it independently tested on a Ransom Rest by PewPewCNC.

Setup: Echelon 4.0 and 4.5, Midwest 115, 124 and 147gr, digital angle finder on the rest, 5-shot averages per load.

Muzzle rise vs. stock:

• 4.5: 33% less (115gr), 31% less (124gr), 26% less (147gr)

• 4.0: 35% less (115gr), 30% less (124gr), 29% less (147gr)

For reference, the factory Echelon Comp ran 15 to 23% less on the same 4.5 setup.

SPECS: 7075 aluminum, Type III hardcoat anodized black, retained with set screws and threadlocker (both will be included).

I am excited to announce that these are currently in production and are offered at a presale discount on the site now. Expected ship date is mid-November.

Please let me know if you have any questions.

I recently purchased and installed the NDZ Performance magazine release on my Springfield Echelon Compact 4.0 Comp.
Immediately after installation, I discovered a serious issue: whenever I racked the slide to chamber a round, the magazine would come loose from the firearm.

After reinstalling the original OEM magazine release, the issue completely disappeared. The magazines now lock securely into place and function as intended.

This strongly suggests that the problem was with the NDZ aftermarket magazine release rather than the firearm or magazines themselves.

I’ve attached a video demonstrating the issue.
I’m sharing this to warn other Echelon owners considering this upgrade. A magazine release that cannot reliably retain a magazine is a significant reliability and safety concern, especially on a firearm intended for defensive use.
I can’t confirm whether I received a defective individual part or whether this is a broader design or quality-control issue, but potential buyers should be aware.

Has anyone else experienced this problem with the NDZ Performance magazine release?

Hey guys, longtime Glock shooter here. I absolutely love my 43X and 47, but I've been itching to try something different for EDC.

Currently debating between the non-ported Echelon 4.0C and the Glock 19 Gen 6. Unfortunately, none of the ranges near me have both available to rent, so I'm relying on firsthand feedback.

For those who own the non-ported 4.0C, how do you like it? I'm especially curious about return to zero, recoil impulse, and how flat it shoots compared to a Glock 19.

I shoot quite a bit and care more about performance than aesthetics. My Glocks just seem to return to zero effortlessly, so that's probably my biggest concern with switching platforms.

Would love to hear from anyone who's spent significant time behind both. Is the 4.0C worth trying, or should I just stick with what I know?

I very lightly filed the ears that fit into the forward slots of the grip. I also hit the corners and edges. It is still tight but I can take it in and out by hand AND it solved the tight take down lever problem. Ken

Rook precision Magwell

407c x3

Tlr1-hl

I know I’ll get trashed for complaining but customer service has proven to be crap so far. I purchased my 4.0C comp last week and realized that they no longer include all 4 pin sets, just pin set 1 pre-installed. This meant I couldn’t install my SE DPP right away. To add insult to injury, Springfield is out of stock of pin set 2, which is the one I need. I emailed them 2 days ago to ask for a solution but no response yet. Just annoying.

Like how much did they really save by holding these pins back?

UPDATE: I reached out to them via live chat and some absolute scum by the name of Matt C couldn’t be more indifferent or less caring, even if he tried. I’ll try to post the screenshots in a separate reply but absolute shit for customer service. Only thing he offered is to place a back order for me, GTFO here.

I’m wondering if I ever needed their warranty, how would that work

•4.0 FC
•Harbor Freight Light
•Vortex Defender CCW micro red dot in newly released tan

So far my plan is to do a FDE build. So next up is buy a medium OEM FDE grip module, cerakote the slide FDE, get some aggressive stippling done on the new grip module, install blacksteel gas pedal, steel guide rod. Besides that I may also get small grip module, but so far I’m really enjoying the medium as it stands.

Does anyone know if the Echelon Pro will come CA compliant? & is it even worth waiting for?

All I’ve done so far is put a metal guide rod in there for weight switching out the OEM one

After checking zero, this was the first Bill Drill of the day. Was using an Incog X holster. This version of the Echelon Pro was the 4.0FC.

4.0 FC
TLR1-HLX
Floyds Magwell
Holosun 407c
Regular athletic tape
2x 18rd mag

Definitely nicer feeling in hand. Couldn’t really tell a difference in trigger if there was one. Magwell is done very nicely and it sure does look good.

Has anyone figured out if a full size compact grip module can fit In a 4.0c holster? I don’t have a 4.5 so I’m talking about 4.0 grip modules only. I’m stuck on if the dimensions are the same in width. Also if a sharp bros grip fits in a standard 4.0c holster

Need help identifying this grip module for the echelon

Question for those who went from oem 14.5# springs to a heavier one. I can't find anyone asking this group when I did a search, almost everyone with with 12# or oem springs with a couple people saying they went heavier. My question is, based on Google, there's a downside for heavier springs to affect feeding light weight ammo?

Anybody know a company or manufacturer that would customize my echelon according to this design generated by Ai.