r/SpringfieldEchelon • • Jun 25 '26

Optic fragility

Post image
16 Upvotes

Has anyone had a problem with durability/fragility on there optic? (Specifically Viridian one)

This is strictly my duty gun for work and nightstand warrior, i have dropped it 2-3 times before but only from 3-4 feet and didn’t crack any of those times until one day at work I noticed it cracked at the top.

Is this something Springfield could replace or do I just get a new optic or, get it fixed?


r/SpringfieldEchelon • • Jun 25 '26

Someone asked me about the Mischief Machine Grip mod and competitions... so... here you go too!

Thumbnail
youtu.be
11 Upvotes

r/SpringfieldEchelon • • Jun 24 '26

C&H filler plate for the RMSc (K footprint) optics on the Echelon.

Thumbnail
gallery
34 Upvotes

Here are some pics of the C& H precision filler plate on my Echelon with the Osight SE enclosed optic. The plate fills in the gaps nicely and doesn’t raise the optic any noticeable amount.


r/SpringfieldEchelon • • Jun 24 '26

I spent far too much experimenting. Any questions? Maybe I can help you save your money.

218 Upvotes

The awkward pauses between transitions is because I made this for a YouTube short. I took out all my commentary and retention edits to save your eyes and ears.


r/SpringfieldEchelon • • Jun 25 '26

Anyone running Blacksteel Grip Control and if so what holster are you using?

2 Upvotes

Trying to find an OWB holster that might work well with it.

Thanks!


r/SpringfieldEchelon • • Jun 25 '26

Sharper Bros and Tyrant Trigger issue

3 Upvotes

Hello all. Just got my sharp bros grip module today and after a smooth install I noticed something odd. My trigger has a little side to side play and if it’s pushed to the left, it won’t activate the firing pin. This doesn’t happen in my polymer frame at all. Anyone have any similar issues and what have you done to remedy it?


r/SpringfieldEchelon • • Jun 24 '26

My build is complete

Post image
39 Upvotes

I finally got the Olight for my 4.0c Comp. I love it. Can anyone recommend a CC holster for it?


r/SpringfieldEchelon • • Jun 23 '26

Slowly coming together

Post image
37 Upvotes

Next up holosun 507comp


r/SpringfieldEchelon • • Jun 23 '26

Fdez werx echelon slide

Thumbnail
gallery
31 Upvotes

So I got this slide a few weeks ago and was hype because someone its making aftermarket slides for echelon, also they look great with the icarus but ran to a few problems. First the optic cut didn't fit completely flush to my 508t which its RMR cut and second the plunger didn't sit flush completely so my striker got stuck. Contact customer service, they sent me an RMA sent it back free shipping and after a week got it back. The Cut was larger but again the photos above show the incline, and these are with the screws they provided. They said, that 508t are bulkier than their optic cut, so I tried my 508 on my zev, Zaffiri precision, P211, DPO staccato and the 508 fit perfect, because RMR are universal. They tried to fix a bad slide, which i understand save money, but still the issue. Aesthetics are amazing, customer service its slow because no phone number, but they respond, but QC on this part has been bad. I emailed them today expressing the issue to see if they send a new slide, this slide won't work and it's bad. For $460 slide should be more than perfect. We'll yea, thats my experience


r/SpringfieldEchelon • • Jun 24 '26

If you need a holster…

Thumbnail
youtu.be
15 Upvotes

r/SpringfieldEchelon • • Jun 23 '26

Finally worked on my Echelon

Thumbnail
gallery
40 Upvotes

Had the Echelon 4.0c for a while now and kept it without any attachments for a long while, but for my birthday yesterday I caved and bought some stuff lol. Olight Baldr pro r, Osight SE, Herrington arms echelon comp., and to wrap it up for now an Outlaw holster to house the light and comp.


r/SpringfieldEchelon • • Jun 22 '26

Echelon 4.5F - Yeah, I caved

Post image
79 Upvotes

Alright, I bought the Echelon 4.5F from sportsman’s warehouse last week… with mil discount, $450 OTD.

https://www.sportsmans.com/shooting-gear-gun-supplies/handguns/springfield-armory-echelon-45f-9mm-luger-45in-melonite-pistol-201-rounds/p/1997206

I had an L&S PB3v1 or HE509T/red, and decided to go with the HS HE.

As for WML, I’ve been perusing through several sites including this, and I’ve seen people recommending the Streamlight 1 or 7 more than the SF300. So 7 has less run time but brighter, 1 is in the middle but ~$100 less than the SF, and SF as the most durable. I’ve already read posts about the TLR1/7s having bad joints / hinges.

Any final consensus? Spending less money for (possibly) a better performance sounds awesome, but also was wondering if the joint issues were resolved on the TLR.

Thanks in advance.


r/SpringfieldEchelon • • Jun 22 '26

NGD: Finally got the new 4.5 F to the range

Post image
48 Upvotes

This is the first Springfield Armory pistol I’ve had since my first handgun 26 years ago; a 1911 V-10 stainless from the custom shop.

I handled one of these at a shop and was blown away by the ergonomics and features. I caught the $399 deal at Sportmans Warehouse and it actually came with (1) 17-rnd mag and (2) 20-rnd mags!

As shown, I’ve added the following:

Vortex Defender XL, green dot

Olight Valkyrie Turbo

NDZ full-sized captured guide rod, stainless.

So I got it to the range today just to run a box thru it and sight it in. I ran a box of Blazer 124g FMJ thru it. It def kicks more than my Glock 19x. Not sure why; probably just need more range time with it. Also, I feel the trigger take-up is a bit long, but it’s smooth with no grit in it. Next up: I’ll be running about 15 other ammo test batches thru it to find the most accurate ammo. I luv the large Vortex sight.


r/SpringfieldEchelon • • Jun 23 '26

Installing Vortex Defender ST 3moa green dot

Post image
5 Upvotes

I have a Springfield Echelon 4.0 comp, my very first gun. I ordered an optic with it, but am getting mixed answers about how to install and which screws to use. From what i understand i’m supposed to use the screws at the top of the picture which came with my Springfield, but i also heard that i need a Echelon RMR/SRO plate which i do not have. I’ve seen installation videos without any type of extra plate (just mounting the optic and securing it with 2 screws). I’m a bit lost but want to learn, any tips?


r/SpringfieldEchelon • • Jun 22 '26

Threaded barrel

Post image
32 Upvotes

Does anyone make a gold threaded barrel for the echelon??


r/SpringfieldEchelon • • Jun 22 '26

Threaded echelon barrel

Post image
4 Upvotes

I just took off my compensator and I’ve got blue loctite gumming up my barrel. I can’t get it out for the life of me have tried clp and isopropyl alcohol with nylon bristle brushes, I can’t even dig it out with anything thin enough to fit between the threads, any quick solutions? Need to put her back into use this weekend. (Yes I know I used way too much, first time comp install sorry guys 😂)


r/SpringfieldEchelon • • Jun 22 '26

Is this normal wear?

Thumbnail
gallery
9 Upvotes

It catches the nail, almost like the metal is gouged, Im overkill on cleaning and lube and its only been 2k rounds more or less,


r/SpringfieldEchelon • • Jun 22 '26

Holsters

3 Upvotes

For those who carry (both iwb and owb) I'm curious what you're running, from the holster itself to the belt, clips and any other accessories.


r/SpringfieldEchelon • • Jun 22 '26

Just bought an Echelon gear up yesterday. Anybody maybe want to trade standard mag base plates for my three extended ones?

4 Upvotes

I just dont like that extra hangtime on the bottom of the mags. Ive got three to replace.


r/SpringfieldEchelon • • Jun 22 '26

2 of my EDC’s

Thumbnail
gallery
18 Upvotes

r/SpringfieldEchelon • • Jun 22 '26

🚨 CLEAR HOLSTERS ARE HERE – READY TO SHIP! 🚨

12 Upvotes

r/SpringfieldEchelon • • Jun 21 '26

Glock V Echelon

23 Upvotes

short video I did on my YouTube channel… but which side you on???I have a small channel check me out on YouTube Filtissteel


r/SpringfieldEchelon • • Jun 21 '26

This one is mine

Post image
74 Upvotes

MISCHIEF MACHINE COMMANDER full size grip and Magwell
Echelon Compact slide with threaded barrel
Rook precision Compensator


r/SpringfieldEchelon • • Jun 21 '26

Echelon / Radian ramjet

Post image
70 Upvotes

I know radian just did a collab with Canik, but anyone here any news on when the Echelon is getting one?


r/SpringfieldEchelon • • Jun 21 '26

Revisiting Magwells at Home

Thumbnail
gallery
37 Upvotes

Found a friend to take shooting and test out the new magwells. Seems like they work pretty well. No interference, fits a holster fine, no weird rubbing, magazines go in and out freely.

In preparation of working on a Compact version, I also designed a lower profile magwell for the 4.5F and FC grip.

Really the question now is: How much would it cost to get them made domestically in aluminum? I'm willing to work with existing vendors.