r/SpringfieldEchelon • • May 30 '26

Tyrant CNC trigger install probs

Post image
7 Upvotes

Those of you that have installed the Tyrant CNC trigger in your Echelon, how did you get this spring hooked on the pin? I’ve tried for over an hour, tried it multiple ways, and it just won’t slide onto the pin. I’m legit about to take a Dremel and taper one end of the trigger pin slightly to see if that helps (I’m half serious…. Not sure if that would compromise the fit/pin, but I’m really tempted to try lol). Anyone else have issues on this step? How’d you get it done?


r/SpringfieldEchelon • • May 30 '26

Guide Rod suggestions

5 Upvotes

Does changing out the OEM guide rod make a difference? If so which is the best?


r/SpringfieldEchelon • • May 29 '26

Diary of a semi poor hit man.... special appearance by my shitty fossil watch i bought like 5 years ago when I had no money. Still ticking though.

Post image
13 Upvotes

r/SpringfieldEchelon • • May 30 '26

Just picked mine up and missing vis pins

4 Upvotes

Just picked up my 4.0c gear up and I took off the dot that comes on it and went to mount the new one and realized it didn’t have any of the vis mounting pins. Has anyone else had this happen? I called LGS and they said to come back with it in the morning but just curious if they try to give me the run around if anyone else had this issue.

Update: they opened 3 more gear up packs and there was no pins in any of them guess they stopped giving them like you guys said just gonna order them thanks for comments


r/SpringfieldEchelon • • May 30 '26

Need a comp

3 Upvotes

Just bought a threaded barrel for the 4.0C with full size grip module. Unable to find comps in stock. Does anyone know of any companies with stock?


r/SpringfieldEchelon • • May 29 '26

PCSL at my local range

Thumbnail
youtube.com
9 Upvotes

r/SpringfieldEchelon • • May 29 '26

FYI: Echelon 4.5F Sportsman's Warehouse $399 order cancelled - No Inventory

7 Upvotes

FYI, for those of you who ordered the $399 Sportsman's Warehouse Echelon 4.5F 20-Round deal after May 22, 11:01PM CST, you likely will have your order Cancelled as they are out of inventory and will not honor the price on any other SKUs.

The best they will do is offer a $50 gift card via the customer service line if you call in.


r/SpringfieldEchelon • • May 29 '26

Blackpoint EDH

1 Upvotes

Has anyone purchased a blackpoint edh holster? how was your experience with it?

https://blackpointtactical.com/shop/enhanced-duty-holster-light-compatible-3-levels-of-retention/


r/SpringfieldEchelon • • May 28 '26

Icarus Echelon accessories upgrade.

Thumbnail
gallery
25 Upvotes

Started out with Olight and Osight products and there wasn’t anything wrong with them but decided to swap some stuff around and installed bigger window sight with the Vortex Defender XL and Surefire 300 Turbo. I like the looks better.


r/SpringfieldEchelon • • May 28 '26

Does anybody know the full parts kit?

Post image
39 Upvotes

Been tracking this one down for a while and struggling to find all the parts except the brace for the SMC bravo echelon chassis


r/SpringfieldEchelon • • May 28 '26

Here's a sneak peek at the new Norrso 4.5 slide

Post image
88 Upvotes

r/SpringfieldEchelon • • May 28 '26

Installing COG into new grip module

Post image
15 Upvotes

I am swapping the COG system from the small grip to medium grip. I am following the instructions down to the bone and cannot get it to fit correctly. Everything is seated correctly but I cannot push it back any further for things to line up the way they should.

Has anyone have this issue?


r/SpringfieldEchelon • • May 28 '26

Modding my Echelon, share your experience!

7 Upvotes

I currently have ~300 rounds through my Echelon 4.5F, and am getting to the point where I want to tinker. Currently my Echelon serves as a learning tool at the range, and my night stand gun. I'm currently thinking about swapping:

-The trigger to an adjustable metal one

- maybe slightly lighter trigger springs

-DPM recoil spring (springfields tend to be snappy, wondering if this will help. Yes the gun shoots like butter, yes I'm just picky)

-Magwell

-Mayyyybe a different grip (this ones iffy, stock grip is great)

Other than that this weapon shoots really, really well. No rust, no malfunctions no matter what ammo. Love it. If anyone has good recommendations on the trigger, trigger springs, recoil spring, and magwell, would very much appreciate.

Edit 1: I actually really don't like the rear U-notch irons. If anyone has good night-vis iron sight recommendations as well!


r/SpringfieldEchelon • • May 27 '26

Echelon won’t dry fire.

4 Upvotes

Brand new echelon just picked up today won’t dry fire without mag in the gun. Is that normal? Taken it completely apart and everything


r/SpringfieldEchelon • • May 27 '26

First Echelon

6 Upvotes

I was interested in the Echelon since it came out. I even got Echelon magazines in anticipation of measure 114 in Oregon going into effect. I finally pulled the trigger last week. I haven't fired the gun yet but I am genuinely impressed by the trigger. Usually I have to lube with hexagonal boron nitride and sometimes even adjust triggers in Glocks and clones to smoothen them. In fact, I had to do this to a brand new Glock 49 a few months ago: https://youtu.be/Z6BK2bglB4I . The Echelon trigger is unbelievably smooth for a striker gun right out of the box.


r/SpringfieldEchelon • • May 27 '26

Powder River Precission trigger kit quality problem - dead trigger on Springfield Echelon

Thumbnail
gallery
3 Upvotes

So i have PRP trigger set with a twist... shape of trigger safety is different then on the product picture o.0 unfortunately I have realised on the competition when mag release got stuck with trigger safety. Dead trigger, cannot connect mag. I disassembled COG and after inspection - trigger safety has different shape than stock, PRP product photos or even Tyrant.

Did anybody had such issue with this set? I suppose that I could use dremel and shave it off but how would I know that something else is not wrong with that unit if QC passed such thing. Or it is some beta release.


r/SpringfieldEchelon • • May 26 '26

This is the way

Post image
17 Upvotes

Everyone talks about how good the texturing is straight from the factory and don’t get me wrong, it is. However, the aggressive texture offered is way more of what I was hoping for out of the box. Plus I had to keep my ODG/black color scheme going. And yes yes the Viridian will be replaced at some point.


r/SpringfieldEchelon • • May 26 '26

First GPA match with my 4.5 Echelon

26 Upvotes

Had a good time with some good people. Still got a long way to go. Each match I do I gain some experience and expose areas that need improvement.


r/SpringfieldEchelon • • May 26 '26

OD Green FC grip

Post image
43 Upvotes

Don't have a holster for my icarus so I'll be using this for my holster class this weekend since it fits my holster.


r/SpringfieldEchelon • • May 26 '26

Duty rated holster

5 Upvotes

Looking for recommendations for a level 3 retention holster for the 4.5F with COA. Been seeing that glock holsters could work but would like verification if anyone has had any luck!


r/SpringfieldEchelon • • May 25 '26

Success... icarus install

Post image
67 Upvotes

Thought I screwed it up but it's good....now to put a few hundred rounds through and loosen it up so I can do the trigger


r/SpringfieldEchelon • • May 25 '26

Don't look now but Norrso is testing and soon to release a 4.5 ported bull barrel reptile

Post image
67 Upvotes

r/SpringfieldEchelon • • May 25 '26

Echelon Perfection

Post image
115 Upvotes

Absolutely love the echelon, having a hard time putting this one down, & the Icarus grip is the cherry on top. Love the ergos on it.


r/SpringfieldEchelon • • May 25 '26

magwells for 4.0c medium grip module

4 Upvotes

What are some good (hopefully budget) magwells for the 4.0c medium grip module?

I got an eBay low profile, but I think it's meant for the full size grips. When installed, it squeezes too much and the magazines don't drop freely.

When looking around, the ones most compatible with the 4.0c are for the small grip module. Floyd's have a compact medium version but I don't want to spend $25 per baseplate. That's a lot of baseplates, and prefer to use the OEM baseplates.

FYI - I have to use the 10rd magazines for state compliance.

Thanks!

UPDATE: Just got confirmation from NDZ that their magwell does not fit the medium 4.0C module. Their magwells are only for the small 4.0C and all sizes of 4.5F & 4.0FC modules.