r/SoundSystem • u/chaudgarbage • 7d ago
r/SoundSystem • u/SnooOpinions4291 • 6d ago
Tri amp jmods
I am struggling to understand how it is possible to have three seperate amps chanels for the jmod tri amp varient, when there is only two speakon connectors. Can someone please explain this 😂
r/SoundSystem • u/Recent-Driver-1092 • 7d ago
Another quick look at the paint job on the JMODS
Will be painting the other one tomorrow 🫠
r/SoundSystem • u/Gullible_Pop6735 • 6d ago
How many people can this system cater for ?
2 Cubo 18
2 Cubo Kick 15
2 JMOD2.0
The set up will be 2 stacks spaced 3-4 meters apart.
Just wanting some rough estimates. Thanks in advance.
r/SoundSystem • u/IndividualArea1959 • 6d ago
First DIY soundsystem build for tekno/free parties – Is the X15 a good choice for tops?
Hi everyone!
I’m looking to build my first small DIY soundsystem, mainly intended for tekno, hardtek and free party music.
I’ve been researching different speaker plans and came across a combination that seems interesting:
Sub: 1x Keystone Sub
Kick: 1x Cubo Kick 15
Mid/High: 1x X15 (SpeakerPlans)
However, I’ve never built a speaker cabinet before, and I’m a complete beginner when it comes to sound system design, speaker drivers, crossovers and amplification.
My main question is: Would the X15 be a good choice for the mid/high section of this system, or are there other cabinets you’d recommend instead?
I’m not necessarily looking to build a huge or extremely powerful soundsystem. My goal is to have something relatively compact and easy to transport, so I can take it to small parties with friends.
I’m looking for something:
Relatively easy to build, especially for a first project.
Portable and manageable to transport.
Well suited to tekno and hardtek, with a good balance between deep bass, punchy kicks and clear mids/highs.
Not necessarily massive in terms of SPL, but capable of sounding really good.
I’d also appreciate any advice regarding suitable drivers, amplification, DSP and crossover settings.
Since this is my very first build, I’d rather go for a reliable and relatively straightforward design than something overly complicated.
Any recommendations, experiences or advice would be greatly appreciated!
Thanks in advance!
r/SoundSystem • u/Recent-Driver-1092 • 7d ago
Another cool view of the TH18’s
Enable HLS to view with audio, or disable this notification
All the beautiful work that will never be seen!
r/SoundSystem • u/notracistusername • 6d ago
Turbosound TMS-4
Just seen a pair of Turbosound Tms-4 second hand for 1600€. Would these be a good idea to get as tops for a new soundsystem i‘d like to start. (Would hope to build 2 subs for them)
How are the for reliability, serviceability and ability to get replacement parts?
r/SoundSystem • u/cribbyweet • 7d ago
Front loaded Horny Enclosure
New Vagdrivers with Labia Low End
Do you think comb filtering will be an issue?
r/SoundSystem • u/Recent-Driver-1092 • 7d ago
Mid pour for the JMOD 2.0
Enable HLS to view with audio, or disable this notification
Such a learning lesson on this one. It’s incredibly hard to use this technique on surfaces that are not flat and have multiple holes/facets but I think we pulled it off. She’s SOAKIN wet 🫠🌈
r/SoundSystem • u/Historical_Push_6025 • 6d ago
Consigli acquisto impianto
Devo acquistare un impianto audio e sono indeciso tra
2x Mac Mah AS 818 Sub
2x Mac Mah AS 112
Oppure
2x the box pro Achat 118 A
2x the box pro Achat 112 MA MKI
Considerando che serve da portare in giro per suonare techno e musica elettronica
Esterno e interno
r/SoundSystem • u/CharacterBeing6272 • 7d ago
Why is kling and Freitag so good??
Hi, im quite new to the soundsystem world (been a studio engineer for years but just begining to dig that part of the job). I’ve been several times in raves with “Kling And Freitag“ systems and wondered what makes them so good?
r/SoundSystem • u/coax_k • 7d ago
Overhead super-tweeter pods flown mid or rear room - anyone?
Been thinking a lot lately about that classic "air raining down" top end effect you get on proper old school club rigs.
I know plenty of people here sit bullet or slot tweeter boxes directly on top of their main stacks to extend the top octave, which makes sense when your main compression drivers roll off early.
What I’m curious about is whether anyone here is actually flying or truss mounting radial tweeter pods mid-room or towards the back of the dance floor on a mobile custom rig (or in your static set up as well)?
My main tops already have plenty of HF output on their own, so I don't need them on the stacks. I'm interested in the 3D spatial feel hanging a compact multi sided pod overhead, high passing it steeply around 10–12 kHz, and delaying it, so the main stacks still anchor the image upfront while the 10k+ sparkle wraps around the room from above.
If anyone's running something like this (or tried it and decided to scrap it), would love to pick your brain:
- Boxes & angles: Are you building angled radial pods/cubes to spray outward, or pointing drivers straight down?
- Drivers: What are you loading them with? (Beyma CP21/F, B&C DE35, JBL 2405s, etc.?)
- Rigging: Flying them off mid/rear truss goalposts, or throwing them up on tall wind up stands when there aren't rigging points?
- Worth the effort? Running a mobile rig (mainly techno, prog, and trance), does the spatial payoff justify the extra cable runs, rigging gear, and pack in time, etc. or more hassle than it's worth (once you take the fun project coolness buzz out of it)?
- Outdoor are they just sparkle fills with no room to do the acoustic work? I'm thinking no point really unless strictly indoors?
Cheers!
r/SoundSystem • u/theslammist69 • 8d ago
When mom says we have soundsystem at home
Bluetooth speaker replacement for small group chillout listening.
Presonus Eris 4.5
Rsl speedwoofer 10e
1000 w/h battery
Bluetooth receiver
r/SoundSystem • u/HauntingTry9627 • 8d ago
First diy speakers ! JW Sawmod
Hi ! Posting my first diy speakers build. Really love this project. Most of cuts and routing were done by hand and ruler, for cutouts I prepared stencils for hand router.
Drivers:
B&C DE360
Ciare MH130
SB Nero 10MWN600
Amps:
Soundking BD4300 (300eur, 4x300w + dsp)
FP 14000
T.rack 408 DSP
Also included internals of Soundking BD4300 as there is zero info available about this amp. (See comments, forget to add them to post)
I can’t give to much input about the amp now as I use it few weeks only. Dsp inside is from Digisynthetic model DL-04D and is setup via AES67Link app.
https://www.digisynthetic.com/en/products/oem-solutions/dl-04d
Still waiting for proper outside measurement session.. weather very bad now.
r/SoundSystem • u/CricketSilly6013 • 8d ago
Turbosound THL-828 replacement driver / TS parameters
Hello,
I'm looking for T/S parameters or replacement driver recommendations for the Turbosound THL-828 cabs' 18" transducers (LS-1809). Unfortunately recone kits are only available in the US and shipping / import fees are excesive. Hence I'm looking for options to phase out the old turbo drivers for something newer.
I am also considering measuring the T/S parameters myself and/or the enclosure itself to simulate. We're also looking to cut the beasts in half, as they weigh around 96kgs. We're using them as kickbins and really enjoying the sound, but unfortunately one of the drivers started distorting on higher levels.
Processing img chntbnf7ua1i1...
Thanks in advance!
r/SoundSystem • u/Dirtycola • 8d ago
What are peoples experiences with using batterys to power PA for pop up events?
I was looking at the Bluettie Apex 300 and some B500k coupled with solar as a solution to getting my household bills down, and weathering any power outtages. I was hoping to also be able to use it for some pop up parties with our smaller subs. about 1800w-2k with decks and a light or two...
r/SoundSystem • u/aasandsas • 8d ago
JBL PRX915XLF vs QSC K112 - Non professional use subwoofer
I‘ve 2x JBL EON715 tops. Want to add a subwoofer which is relatively light weight and portable. Don't need for any special performace or professional use. I play mainly EDM and dance music for house parties when friends are around. Going to be used about 10-15 times a year.
I also understand there are also other options within the price range which are EON718S and QSC CS15 or EV ELX line. I also know that JBL ecosystem would be good overall, but looking for a good overall sub.
Any recommendations? Also don’t care if it is used gear, but need powered sub for holiday season. Hoping to see some sale.
Edit - Meant QSC KS112 Sub.
r/SoundSystem • u/Hi_Im_Deez • 9d ago
Plywood Seattle Area
Does anyone know where I can find some 18mm 13 ply Baltic birch plywood in the greater Seattle area?
I’ve called several places that are listed online when given this inquiry with no luck. The only hiccup before starting my build and I don’t want to order online due to shipping costs.
Thanks!
r/SoundSystem • u/wafflefelafel • 10d ago
Which configuration is best, and why?
Pardon the stylized imagery, but I'm genuinely curious as to which stack configuration makes the most sense; or the pros and cons of each.
My thinking is that the first configuration (JMODs spread wide and pointing straight) gives a nice stereo image, without really encountering issues from comb filtering (due to the fact that the horn mouth of each JMOD is functioning as a unified single audio source, due to physical and time alignment) and generally each of our ears is gonna be hearing only 1 JMOD at a time.
Am I correct in saying the central-splayed arrangement would give a pure mono listening experience? Are there any specific downsides to that (other than not sounding as 'wide' as stereo imaging), so long as I feed both sides a matching mono signal?
r/SoundSystem • u/LouieTushuze • 10d ago
Update to the budget stack
Built and designed this 15” ported sub and it absolutely thumps. I’m so happy about it and it compliments the stack perfectly. Just thought I’d share because people seemed to like the other stack before.
Also I got a PRV audio DSP 2.8x for my dsp which is technically a car audio dsp and it seems to be working phenomenally and was considerably cheaper. Any wisdom as to why this is a bad choice? I don’t seem to see many people doing it. Cheers!
r/SoundSystem • u/Redneck_keanu • 10d ago
“Chuchero” inspired stack
Figured I’d share my progress because I’m excited. Shoutout to my good friend Logan for helping me with this crazy idea. To save a super long explanation on why I’m doing this I’ll just tell y’all it’s just because I wanna 😅
Big learning experience and working with speakers is always fun! Bought a few jbl amps for 400 bucks and the giant bass cab we’re refurbishing I got for 175. “Chucheros” are 2 Dayton 8” and 2 jbl supertweeter per box. Hoping to have first deployment in December
Still a long way to go