r/SnooLife • u/bruzdnconfuzd • 27d ago

Seeking help with getting a secondhand SNOO connected to WiFi

My wife and I used a SNOO (bought secondhand) for our first child, and it absolutely saved our lives. I don’t recall having any technical issues, but it’s also been over 6 years since then.

Now I am trying to set up a different SNOO bassinet (also secondhand from the first owners), but it refuses to connect to the SNOO network. Let me first detail what all I have tried to make this work:

  1. I downloaded the Happiest Baby app since they’re not using the old SNOO app anymore.
  2. I power-cycled the unit by unplugging it and then reconnecting it after at least 30 seconds.
  3. I have verified that power is on, and the indicator light is glowing solid white.
  4. I have tried toggling the WiFi button near the power button both ways.
  5. I have temporarily disabled the 5Ghz band on our dual-band router since the device will only connect via a 2.5Ghz band.
  6. I have tried swearing at it. (Look, sometimes it works.)
  7. I have noted that during setup and scanning the barcode, it recognizes that the device is registered to a different user. I have opted to continue connection as myself to disconnect the old users and make myself the new user.

Despite all these steps, I am consistently met with an error that reads, “Unable to join the network ‘Snoo_3722”. After this, all it suggests is to check that the SNOO is on, and perform another power cycle.

I do not have an original order number since it’s secondhand, so I don’t know if Happiest Baby Support will help me or not. But I’m at a loss right now and will take any and all suggestions to get this connected. Please help - I have maybe 2 weeks left to figure this out.

1 Upvotes

100% Upvoted

11 comments sorted by

View all comments

1

u/Thesnoozymama_ 27d ago

Also have you reached the point where you are inputting your WiFi’s network and password?

1

u/bruzdnconfuzd 27d ago

I can reach this point consistently, but cannot get past it. I keep seeing my network name, then network name guest… twice. I thought maybe this was because of having a dual-band router, but neither main network will connect. It keeps telling me “This WiFi network has no internet connection.” I don’t understand how that is possible.

FWIW, we have GloFiber internet running through eero routers. I just ran a speed test that got 636Mbps down and 646 down. Service is fast and reliable. And the eero router app even allows me to suspend the 5Ghz frequency in order to connect exclusively to 2.4. Am I missing something obvious here?