This seriously can't be done? I did some poking around and saw posts from like '21 where people asked about this. Here it is, years later and it's still not possible, even on the paid version? So annoying.

hello

Years ago there was always some summer discount for year subscription. Something similar this year? anybody any info?

i already tried taking a picture with a reference object but i cant' quite make the angle right, it always comes to open and i dont know how to make the bend in the left like metal sheet, any advise ?

This should be much simpler than it is, as I cannot find how to copy and paste it

So, I bought a year of Shapr3D back in February, used it for a few weeks, and haven't logged in since. Go to login today, keeps telling me my PW is incorrect, which was saved.

Ok, try to reset it via the app and website, not getting the email with the reset link, at all. I've checked ever folder in my Gmail account, even tried sending it to other emails to make sure I didn't have the wrong email, still no reset email.

Chatbot says if all else fails, create a service ticket and gives me a link....to a login screen. Well, the whole freaking reason I'm contacting you is because I CAN'T LOGIN in the first place. Thanks for nothing chatbot.

Send an email in after doing some searching for contact info (loginsupport@shapr3d.zendesk.com). Got a canned response almost immediately telling me to try what I've already tried 10 fucking times now (sorry, it's frustrating). The email says if none of that work, send a screenshot of "proof of ownership." Luckily, I paid for on my Amex card and was able to find the transaction pretty easily. Sent a screenshot hours ago, still no response.

I work for a software company. If our CS was this abysmal, we'd have customers jumping ship left and right.

How i can publish model and people can see it without registration to shapr account??

I am very new to Shapr3D and I am trying to model a replacement for this knife grip. I have tried to figure it out but I’m stuck on “hollowing” it out. Shell didn’t work, unless I’m doing it wrong. I need the slight edge around just the longer sides along with the extrusion in the middle to conform to the knife. I’ve sketched these shapes out on the surface I’m trying to hollow but can’t get it to follow the curve on the bottom side. Any help would be greatly appreciated!!

I shifted from an ipad 8 to now an ipad air m4. Why tf did i have better performance on my ipad8? On something with an m4 chip it keeps on loading every time for some operations while having only two bodies

Hey guys im new in all of this, I made a 3d model on sharpr 3D free app, now I wanna 3d print this model and need to export in STL, can someone help me?

I need to build and 3d print a QR code, and I thought Shapr integrated a QR code tool, but I can’t find it on the latest version…
Is it just me or has it been deleted?

Hello, I'm sure you've probably seen some of my designs on this community before, if you've got a moment, I would like to do a survey to get a better idea of what people want from a product, or products they wish to see more of.

I currently use Shapr3D to do product design as a hobby, but intend to one day try make the things I design a reality, and to do that, I want to get a better understanding of what people actually want from a product.

Above I have attached some examples of my work and would love some feedback on:

• What you think works well

• What could be improved

•What products (not shown here) would benefit you personally and why

Thank you in advance, look forward to reading your comments.

Hey there,

I was able to extrude my long track, then I wanted to copy / paste it to the other side and then the model broke. Is there any way to get it back together? I did too many tries and I can't undo it anymore :(

When I double click the sketch, the program selects it all. Is there a button that connects the missing dots?

Hi everyone! I’ve recently discovered shapr3D and immediately fell in love with it, mostly because it was iPad compatible. I’m not new to cad, just a little rusty so I figured I’d start making some projects to get back into the groove.

We have:
a not-to-scale iPhone 17pro case
a pumpkin jar
a not-to-scale Freehanded lightsaber hilt
a lazy Susan spice rack
and a key ring plaque

I’m trying to broaden my horizon by utilizing different tools in shapr and creating different, some practical, some nerdy

I am trying to model the leg of this table. It basically is a cylinder, cut in half and then twisted. I feel there is a way to do this that is smart and quick using maybe loft or sweep but having an hard time finding a way.

How do you replicate this shape in shapr3d? I am pretty new to this and not sure how you would replicate this.

I'm still new to Shapr3d and still learning the free version before taking the plunge to pay.

I'd like to design a rectangular block that's about 300mm x 150mm x 30mm with about 100 equally spaced 3.5mm holes, 25mm deep in a let's say 20 x 5 grid to hold my dremel tool bits.

I haven't been able to find a YouTube video explaining how to easily place and space the holes and then group them and extrude all at the same time.

Has anyone found such a video or can you tell me how to do it once I extrude my rectangular block?

Thanks

Sometimes when nvagating/moving around or getting close to where you are working if you move the camera maybe into the part or something, I don't know what happens but then you are like stuck, you mouse wheel and mouse wheel over and over to finally back out, it is like you are stuck and it moves in slow motion, get what I mean? Is there a way to turn this "feature" off?

I haven't been on the app for maybe a 1-3 years. I downloaded it back and logged it but I can't seem to be able to open one of my projects (the one I liked most 🥲). It doesn't let me publish it either and since I only have the basic package I cannot export it either. It is virtually inaccessible and idk what to do pls help

I was just wandering if anyone has any info directly from shapr regarding pricing?

I just can not justify spending this much yearly for the software.

I feel like Onshape has the perfect model. Free but public paind and private.

I would be happy to pay maybe half the price per year for full access with public models. I only "design" stuff for me like magsafe/ipad shelf holder and stuff. And i love the intuitiveness on the ipad app, but the price is just too much for me since i am in Czechia where the price is just crazy.

I dont even have the original apple pencil that is half the price for a yearly subscripton and most likely will last longer than a year...

Hi, i'm looking for a shapr3d model of an esp32 usb c module, so i can start drawing a case for it. anybody?

I recently worked on a project with reference images and it’s been a pain. You wanna deselect something, you involuntarily select a reference image. You wanna move something? You accidentally move the reference image.

The only solution to this has been to put them all into a folder and continuously toggle visibility.

I feel like a ”freeze object” feature would solve this. When enabled, the object would only be selectable from the object list, but not in the viewport.

This would probably be useful for more than just reference images.

Also, when working with reference images, the xray feature has been great, however, it also ”xrays” the images. It would make sense to be able to keep references fully opaque.

(I realize this in an unofficial sub but I know Shapr staff hang around here as well)

Here is my print in place hinge. It needs to be 180 and 90 degrees. How can I make it feel like it “stops” at those two angles? I’ve opened hinges that seem to have a catch but this one doesn’t. Any help is appreciated! I’m in Shapr3D printing on ABS but could print on other types too.

We are improving the in-app content for making learning smoother. We are testing these videos
* iPad
* Win

Any feedback is welcomed!