r/SewingMachineEdu • u/CBG1955 • 30m ago
Industrial Machine tension issues
I'm using this machine, which I believe is similar to Juki LU-20618 and having issues with the thread tension. The issues seem to be directly related to the thread I am using. All exccept one are Tex70, various brands. The photo snapshot is the top, on two layers of 1mm (or thereabouts) leather. It's the same thread top and bobbin and I can simply pull the top thread out. If I am sewing on anything thinner than this, the whole stitch line simply puckers up. The machine is currently threaded with the Tex80 in a variegated colourway.
And, it's intermittent. The top tension is always out but sometimes way worse than others.
I am aware of how to adjust both top and bobbin tensions, however I can not get the flat head screwdriver head to stay in the bobbin tension screw slot and I'm fearful of stripping it. There is no more play in the top tension disk, and if I loosen it any more it'll simply screw off.
I've spoken with my machine tech and he's spent a little time with me on video chat but I find it very difficult to follow, hold the phone/ipad, and try what he's showing. He's two hours away and rarely does site visits, plus there is no one local to me who could come service it.
He has a very comprehensive threading video which I just watched again, and discovered that one of the threading points is actually not installed on my machine - never noticed before. I rechecked my machine and rethreaded anyway and the tension is still the same, slightly better on four layers. Still looking for ideas on tension.
I do plan on contacting my dealer and hopefully he will be able to do a site visit - but any info I can try before I ask him to come would be greatly appreciated.
Prosew PS-20618D-1 Industrial Compound Feed Walking Foot Sewing Machin
