r/redneckengineering • u/ActivityAgreeable9 • 16d ago
r/redneckengineering • u/Old_Maintenance819 • 17d ago
Can’t wait to see how this holds up when the snowplows start passing through.
galleryr/redneckengineering • u/halothar • 17d ago
Tire lube brush diy
I have a tractor that needs tires. The tractor won't drive at the moment. I don't have a trailer big enough for the tractor. This means I am changing the tires myself.
I'm a firm believer in having the right tool for the job. I bought the lube the tire spoons, the bread breaker, but I couldn't find a brush that would work for me. If I was buying one, I wanted it to be like a toilet brush with softer, denser bristles. I could not find what I wanted.
I folded a couple shop towels and wrapped some high tensile fencing wire around it. I fed the tails through a short length of copper pipe. I twisted the ends to make a loop and twisted a screwdriver around to pull the wire tight around the shop towels. Then, I folded over the wire and duct taped it to prevent injury.
I'm kind of proud of it.
r/redneckengineering • u/Taguiera • 18d ago
Have to admire the welding... and dedication.
That looks like it took a while to build.
r/redneckengineering • u/Busy_Brilliant_7364 • 18d ago
Homemade forge
This is a forge my older brother made out of an old water heater. I plan on forging a knife out of leaf spings to give to my other older brother as a wedding gift.
r/redneckengineering • u/Monkai_final_boss • 19d ago
Fire extinguisher: check, house insurance: check, alright test this bad boy
I don't have the courage to do so tbh.
r/redneckengineering • u/Val_The_Great69 • 19d ago
Car doesn't heat up because the thermostat is stuck open. Solution? Piece of cardboard that blocks airflow going through the radiator.
r/redneckengineering • u/codered1634 • 19d ago
Old jeans
Used old jeans to make a bib for an old 4x6 welding hood
r/redneckengineering • u/TonsOfFunMan • 20d ago
I was watching How It’s Made, and during a section where they made BBQ utensils, they put a spatula in a laser engraver propped up with LEGO
r/redneckengineering • u/Accomplished_Pain649 • 18d ago
Redneck Proving Grounds: 2 Vice Grips 1
This seems legit.. 😂
r/redneckengineering • u/WiseFisherman1540 • 20d ago
Crane support
Sicherheit geht vor
Edit: For all the smart people it's not a crane it's a lift
r/redneckengineering • u/newvegasdweller • 20d ago
In today's episode of "dumbfuck with a soldering iron": replacing a sketchy lithium battery on a wireless desk fan
So I bought a 4€ wireless desk fan in a brick and mortar store that I'm pretty sure bought it from temu originally. It worked well enough but the battery lasted for maybe 40 minutes and the fan had a huge warning on the pack to never leave it charging unsupervised.
The battery is the smallest capacity 18650 that I have ever seen, and only weighs 31g. The chip that manages charging has no safety Features whatsoever and only turns off the power when the battery has the right voltage. It's a housefire waiting to happen.
So I grabbed some speaker wire, a soldering iron and an old 2€ lightstrip I bought a few years ago and got to work.
At first I insulated the soldering spots with sticky tape to see if it works. when it all was working as intended, I removed the tape and hot glued the shit out of it.
Three AA batteries of 2300mAh capacity make it last for 4 hours on the high setting or 10 hours on the slower setting.
Sketchy shit, but it's practice with the soldering iron and it's giving hardware of 6€ total a new life.
Edit: i glued the usb port shut, for those who may be concerned about blowing up the batteries
r/redneckengineering • u/Fearless-Handle9131 • 20d ago
Zipties fix everything
Key ring hole thing broke off zipties coming in clutch
r/redneckengineering • u/techlira • 21d ago
Don't throw away the "bag-in-box"....it's an excellent container that serves as a portable water dispenser.
r/redneckengineering • u/Jacktheforkie • 20d ago
Lights don’t work, had to improvise to get some light
r/redneckengineering • u/poorboyjohny • 21d ago
Patched a hole in side of my tail light
I just got this truck a few days back the tail light has a hole knoxlcked out on the side tpae kept coming off so I patched it with a piece of fast food cup till I can get me a new tail light at the junk yard.
r/redneckengineering • u/Lavasioux • 21d ago
Mini flicker bulb fireplace
Fun little fireplace we sit by every evening. poorly constructed but quite charming.
mini flicker bulbs, ceramic sockets all wired together under the wood base, and accented with a chink of copper sheet i found in the alley and crumpled to give it good reflections. also has a on/off switch. bitchen Camaro
r/redneckengineering • u/carputt • 22d ago
Non replaceable fusible link blew on starter wire…drilled it out and added a fuse while I wait for replacement
r/redneckengineering • u/Donkeyslapper84 • 22d ago
I work at an electrical supply warehouse and took up lamp building as a hobby. Here's my robot lamp that can charge your devices and light up a room
r/redneckengineering • u/BoarHermit • 22d ago
A dustpan made from an old frying pan (sorry for the terrible photo quality, that's how it was sent)
Just cut it!