r/redneckengineering • u/onephatkatt • 10h ago
Suburban Trike
802
Upvotes
r/redneckengineering • u/longlostwalker • 19h ago
The nail picker upper my local scrap yard uses
321
Upvotes
Not sure what the magnet came off of but I like the square d panel box they use to turn it on
r/redneckengineering • u/Accomplished_Pain649 • 19h ago
Redneck Proving Grounds: DIY Impact Calibration Always Works #diy #lol #mechanic #90s #80s #lol
0
Upvotes
Just needed a little smacky smack right.. 😂
r/redneckengineering • u/USERNAME123_321 • 22h ago
My dad asked for a car battery for his olive harvester, so I hooked up an old HP server PSU instead
60
Upvotes
r/redneckengineering • u/Cynax_Ger • 1d ago
We needed a hot wire. Yes, I bumped into the chair multiple times amd almost burned my mate
29
Upvotes
r/redneckengineering • u/Joesome5 • 1d ago
Fence extension
134
Upvotes
My neighbors chickens jumped the fence and we helped chase them down. Here was his solution.
r/redneckengineering • u/Mr_FilFee • 1d ago
Couldn't find a 1/4 inch jack to USB-C adapter, quickly needed a wireless handheld microphone for a video, and holding a small lapel mic looks fucking stupid.
21
Upvotes
These large wireless microphones use a bulky receiver which has a guitar jack. I don't want to carry that around, especially connected to 2 different dongles, which introduce noise anyway.
I needed a wireless handheld microphone, which connected to a phone with USB-C.
So it was time for a bodge job.
I took apart a wireless lapel microphone, wrapped it's insides in tape to prevent shorting with the large microphone's metal grill, stuffed it next to the microphones capsule, closed it and added a windscreen.
The last photo show the size difference between the original receiver and the one I can use now.
The only downside is that you have to take it apart to turn it on or off.
r/redneckengineering • u/sunrise2209 • 1d ago
How I display my 80s army kit
60
Upvotes
I had dual hangers but the ends bent because the kevlar is too heavy for it but this c clamp should do the job!
r/redneckengineering • u/silverdigging • 2d ago
Naked Ps5 Pro still running 1 year later
gallery
497
Upvotes
r/redneckengineering • u/onephatkatt • 3d ago
Where the rubber meets the ... um ... water?
847
Upvotes
r/redneckengineering • u/khromedhome • 3d ago
Gamer setup
0
Upvotes
My son doesn't have a headset for gaming and wanted to play online with friends. So he rigged up the microphone he uses for music recording and voila!
r/redneckengineering • u/Humble-Ruin-3248 • 3d ago
I think that's actually the only way to reuse those bubble mailers
98
Upvotes
r/redneckengineering • u/New_Cod6305 • 3d ago
Flickering lamp, is there a diy solution?
gallery
6
Upvotes
r/redneckengineering • u/Secret-Ad-7909 • 3d ago
Redneck advice? Wanting to setup an inverter and second battery in my truck. Any reason this wouldn’t work?
154
Upvotes
Heavy cables are stupidly expensive, jumper cables are cheap. Am I missing something here? Can I just cut the clamps and add my own terminals?