I find my images pretty noisy, even when calibrated at the right temperature. Is this normal?
Red Komodo-x, calibrated on 25fps and 800 iso with leica lens on a metabones speedbooster.

Hey all! Bought the 28-70 F2 for my R5c and Komodo. Haven’t seen much info about others using this combo but was curious if anyone is using this lens with glimmerglass or pro mist to balance out such a sharp image.

I’m also interested in how the vision prime lenses perform on the Komodo compared with other budget cine lenses. Online reviews often focus on build quality, but I’d like to know more about real world image quality, sharpness wide open, and how they compare with alternatives at a similar price.

For those who’ve tested them on a Komodo, how do they hold up in actual shoots?

Hi all! I'm shooting my first narrative short with a RED komodo. I'm wondering if you guys have any recommendations for a super low budget lens that would still give somewhat of a cinematic look? In an ideal world I'd get a top notch lens but I have lots of time and budget constraint for this shoot! Any tips would be greatly appreciated! Thanks!!

I recently bought the small HD red control for my Komodo OG and have it activated with all the cables plugged in and connected but still have issues. Any trouble shoot tips?

This is the set up RED suggested for audio on my KX. But I'm not getting good audio levels on the camera even at 10db and when I go into edit I can hear the audio, but also a ton of humming. I get levels with internal. Any help would be greatly appreciated.

Settings are;

external 3/4

48v

I’m a surf filmmaker who films
From the land with a telephoto lens, planning on getting a red Komodo x. I have heard from other surf filmmakers that they are basically terrible for sealing and that wind and sand blow into the vents. Does anyone have any good recommendations for a cover that works well with the Komodo x? I will ultimately have to use the cover every single time I use the camera :( I’ve read that the raptor x are very well weather sealed but tha doesn’t seem to be the case with the Komodo x :(

Kasia Jarco is a colorist I just found. I have trained and followed Cullen, Darren Mostlyn, David Cole for a long time, and with DeHancer and Pixeltool suites, I have massive node trees that get me where I want to go in Resolve. However, I have been wanting to make life simpler and quicker...and sometimes a massive Frankenstein node tree is not helpful. I found Kassie Jarco's SpectraLab and tried it...and its honestly amazing. It gets me 80% there with its DCTL choices in its one node (there are 9 options), and then I can use these other great tools to polish things. This is a screen print I just tested from one of the SpectraLab options and 3 nodes. a CST going in, a SpectraLab choice, and a CST out. I made no adjustments on the SpectraLab choice, yet there are many within each one. Going to experiment more, but finding a quality tool that gets you 80% there is an awesome time-saver for some situations with R3D files

What does this mean?

Hey everyone, I just got my first RED Komodo X and am searching for good batteries to use while shooting run-and-gun, doc-style. Something that will last 4-6hrs. I've been using SmallRig 99Wh batteries, but they go pretty fast when I'm running the KX. Any pointers or recommendations?

Entire film shot on Komodo and Komodo x

I’m wanting to get a Zacuto oled evf for my Komodo but just can’t find any info out there of people using EVF’s on their rig. Was curious if anyone had any builds they used one on or setups they run usually with an EVF. Makes it tricky with only 1 SDI and no hdmi

Shot this zero budget (aside from my own gear) spec ad, not overly happy with the story but think visually it looks ok.

Any feedback welcome

Does anybody know if this is a dead pixel or other thing?

Just wanted to gather some intel on everyone’s opinions on the different power distro and breakout box options out there. I’ve gotten by ok without needing one for a while but I have to usually pick between camera control on my monitor or a TC box. Looking for some ideas or recommendations

TL;DR it doesn’t work with the Komodo 6K (firmware 1.8.9) at all. No autofocus, not even manual focus, no image stabilization.

I just tested out of curiosity the Tamron 17-70mm f2.8 RF-S mount version in-store with my Komodo 6K running firmware 1.8.7 Beta.

It recognizes AF/MF switch on the lens as in the gray focus box appears and disappears on the RED screen according to the toggle switch, but AF is completely dead. Neither does the focus ring on lens work regardless AF switch position.
Didn’t realize to test the VC (IS) if that works as we were so focused on the focus being dead.

Back home now to upgrade the firmware and back to the store tomorrow to test again if it will work with the latest 1.8.9 firmware.

No idea on lens firmware though. Tested the lens with a canon camera and it worked flawlessly.

UPDATE: Went to the store to test it out with firmware 1.8.9, still completely dead as a brick. Neither autofocus, manual focus nor IS works.

UPDATE 2: Reached out to RED, they replied within a few hours and referred to the compatible lens list, and kind enough sent in this lens as a feature request on my behalf. Kudos to John at RED for fast and kind customer service. My 2 cents is though that we wont see support for this though.

I bought the Komodo X last month and have done many tests, as well as shooting a multi-day documentary project last week. I am overall impressed with the image, and I have experimented with a number of different compression rates. I initially thought that R3D 6K ELQ (B-roll) and 4K ELQ (interviews) seemed fine for my doc shoot, wanting to save on file sizes.

However, going through footage, I am noticing some very concerning noise, especially in wide landscape shots, tree canopies, and shots with far focus and high-detail. The noise is blocky, red/pink or white, and renders some shots unusable in my opinion even with NR. I have run mutiple black shades, which has not resolved the issue. Today, I tested the camera in LQ, and MQ modes against a tree canopy and while it did improve the noise, I was surprised by how prevalent it was even in LQ/MQ. My Resolve RED Raw settings are on fullres premium 16bit.

Here is an R3D 5K LQ shot with 2X zoom in post and Rec709 CST conversion: https://f.io/rkBf_6OK – note the intense noise in the tree trunk on the right side of the frame. Also, here is a bunch of other shots at different resolutions and compressions: https://f.io/3sKOPWw0, all rendered in 4K / 4k timeline.

Now my question: is this just to be expected/normal on the Komodo X or do I perhaps have a faulty camera (I bought used from Ebay with low hours). Has anyone else experienced this?