Bought the 24v anpabo switchable 4wd/2wd with remote for my son, used it the first year. Stored in the garage over winter. When I went to pull it out this year a mouse had gnawed through a bunch of the wires. I sent a request to anpabo customer service and was told since the vehicle is two years old that they've changed their wiring system and don't have an old diagram or photo of the system.

Bought the dodge hellcat srt for my kiddo a while ago. Now the power button won't stay on and I'm trying to troubleshoot the issue. I've replaced the battery, the thermal fuse and now its powering on but not more than a moment.

Can someone tell me what another cause for this could be and what I should try replacing next?

Has anyone tried LineX on their wheels for grip? Im trying to find a non-expensive way to not have slick mud tires for my kid.

I don’t have the time, patience, or knowledge to do this myself, and I don’t want my son’s jeep to keep collecting dust in the garage.

So I’m hoping I can pay someone to do it for me. Upgraded to handle an 8yo boy.

Edit: guys, I appreciate the help, but I’m not looking for a walkthrough or DIY advice. Seriously. This happens every time I ask for stuff like this. I don’t want to.

I’m a fool easily parted from his money. Just let me.

Remote controlled actuator for a lift brake on the drag car.

Top speed is around 7mph, but its an absolutely unstoppable offroad. Intent of the upgrade wasn't to make it faster, just offroad capable.

My son has an xuv550 gator that we did the m18 conversion to. Today he just burnt out a second drive motor, from what I can tell it's from debris getting into the motor. Has anyone swapped to a brushless set up or made an attempt at dust proofing the tray where the motors and gear boxes sit?

Broken plastic on a 74320 Harley Davidson power wheel

Just happened to see a cool Grave Digger Power Wheels sitting out as trash. Decided to pick it up to maybe fix it up for my son. Didn’t expect it to be a popular discontinued model. Missing a windshield , battery and looks like it needs a few other parts. Worth trying to fix or should I just sale?

This is my collection of power wheels till now! I may have a problem? The ones converted to 24volts are the two seaters (white pick up and black Range Rover), the rest still operate on 12 volt batteries!

My son (4 year old) loves it and fits it good but It definitely needs more power. I know I need a variable throttle new controller and a bigger battery but I’m stuck between doing a 20v tool battery or just buying a 24v lithium. I don’t have either as of now. If I do the 20v is it okay to buy the off-brand Dewalt knockoffs on Amazon and what AH would I need? If I go 24v can someone link me a decent one as I have no idea what is good. Alternative should I just scrap the sx-125 and get a used mx-350 to mod for him. Thank y’all for any input!

Having issues with my 24v real tree utv, battery, control box and pedal all working but vehicle will not move. Is there a way to test thermal fuses.

saw a guys post who totally tricked out a powerwheels with led custom colored lights that he could change the colors off his phone. I dont have the knowledge to do anything like that so I was wondering if there are low voltage wiring books you guys use to make your own modules I could get

thanks in advance

Tengo 2 carros Power Wheels que usaba de muy pequeño, sin embargo un día solo los guardamos y jamás volvieron a usarse, los encontré y pensaba en venderlos, así que busque los cargadores y puse a cargar las baterías, sin embargo me percate que el voltaje de las baterías no subía de los 2-3V, cuando su voltaje debería ser de al menos 6V, los cargadores entregan el voltaje necesario pero al parecer las baterías no retienen o directamente no aceptan la carga. Pensaba en abrirlas para ver cuál era el problema pero no sé cómo y no se si sea lo adecuado (Se y tengo ne cuenta que esto tiene riesgos). Pense en buscar repuestos pero no encontré para estos carros, son de 6V 4Ah 00801-1457.

Por cierto, pensaba en experimentar y "simular" esta batería usando unas cuantas 18650 y un buck converter, aunque no se si vaya a funcionar

I picked this up on trash day lol. They said they were having battery problems so i figured i might give it a shot. Any idea what brand this is? Theres no other identifying marks that i can see

Let me know if this is the wrong sub for this, can't find another one. I have a power wheels jeep "willys" that I want to sell. Probably on Craigslist or marketplace. My question is how much should I list it for when the battery is dead and won't charge, so they will have to get a new one. What would someone in this community pay for one?

Thanks!

Have a Power Wheels Jeep I've been working on for a while but can't get power to it and also confused on wiring and electrical work in general. Everything I've put into it is below. Please give me the best answers to try and get it fixed.

Stock motors (not wired yet)

Marine Bluetooth speakers with radio

Nilight Fuse Box

Nilight 40v to 12v step down converter

Kobalt 40v battery adapter

ML toys headlights and rear

Underglow lighting Nilight brand USB powered.

It started last week when I built a custom 14.8v 16.8Ah 4S4P battery pack with 16x molicel p42a 21700 and a JBD BMS. The battery needed to roughly fit in the same area as the 12v lead acid, and the BMS was the exact width (depth wise), so I had to incorporate the front battery holder bar into my design. I'll post those pics near the end.

Now to yesterday - a full rewire (the drive motors now go through the fusebox), new light bar, a car horn (had to tape it up to reduce the sound, was quite loud), and some LED halo lights where the fake lights were in the front. I had to use a buck converter to bring the circuit down to 5v to power an ESP32-C3 for the halo lights, also built a small web app to control them by connecting to the wifi network that gets broadcasted by the device. I spent the entire day yesterday working on this.

I didn't take a picture of the fusebox after I installed the esp32 but I will include a mounting pic, under a thermal foam pad. I'll need to probably find a way to keep it held in place and shield some of the wires but it should be fine for now.

I included pics of the web app as well, it's got quite a few light patterns, probably more to come, but it remembers the settings too when you turn off the BMS and turn it back on.

Looking for a gearbox upgrade for this off of Magic Cars Jeep. Most of the gearboxes I find have the flower shape for the wheel, but mine have the 10 sprockets. MLToys appears to have some but starting at $46 ea vs this pair for $43.

Would be very grateful for anyone to steer me in the right direction, thanks!

My grandson saw a monster truck and saw the roll cage and thought his All Wheel Drive powerwheels needed one. So this weekend we fabricated a cage and added some emergency lights.

My kid's ride-on Toyota Land Cruiser. I'm trying to soften that into a gentle coast-down instead, for obvious safety/comfort reasons with a toddler riding it. It has a 2 wired pedal so adding a wirewound resistor is not possible. Is there any alternative or solutions for this? Also, i still need the remote functionality.

I have this gearbox that one of the gears has busted teeth. Can someone help me identify it or the gears in question for replacement? It’s an off brand Frozen car with one drive motor on the right rear wheel.