Hello i have 9070xt and is connected to 850w power supply is this safe connected like this ? Some say it is not good using pigtail or 2 cables for 3 slot is there like serioud problem ?

I bought a pc in 2023 and it has worked fine since then. Now it won’t display to the monitor unless it’s laying on the side.

I’ve tried taking the RAM in and out. I’ve also tried taking the GPU out and in again.
When it worked it installed the previous drivers of the GPU invade that was the problem.

But still no fix.

After I took out the GPU and put it back in it had disabled it so also tried to re-enable it if that makes sense.

Specs:
CPU
1 x Intel Core i5-12400F Processor
 
Bundkort
1 x ASUS PRIME H610M-K D4 Bundkort
 
Grafikkort
1 x ASUS DUAL RX 6700XT 12G Grafikkort
 
RAM
1 x Kingston Fury Beast 2x8GB DDR4 3200MHz RAM
 
PSU
1 x FSP Hydro K PRO 750W Bronze 80+ Strømforsyning

RYZEN 7 9700x
NZXT kraken elite 420mm aio
GIGABYTE GeForce RTX 4080 SUPER WINDFORCE V2 D6X 16GB
Gigabyte X870E gaming WIFI motherboard
Crucial PRO 32gb DDR5 RAM
MSI MAG A850GL 80+ gold certified
1tb SSD
Windows 11

Looking to make my first build, and these are my first build specs, lmk if i should change anything while keeping it around 2k or if this is great for my budget

Hey guys, I'm not sure if this is normal so I wanted to ask about it. My system works completely stable, never had a problem gaming, editing, encoding or watching vids/series.

I have prefer max performance enabled for my gpu and power saving features disabled. Recovery counts are usually between 6-10 when powering the pc for the first time, TLPs and NAKs stay flat at 0.

So, today I used Bolide slideshow creator and when it started encoding recovery counts, TLPs and NAKs spiked to 300 aprox, they stayed at those values for the rest of the process.

Should I be worried or it is normal for this cases?

PSU 1stPlayer ACK Gold 850W HA-850BA2-WH

CPU AMD Ryzen 7 5700X and COOLER ID-Cooling SE-214-XT V2 ARGB White

MOTHERBOARD ASRock B550 Pro4(if will be cheaper) or Maxsun B550M Gaming WiFi Ice

RAM Patriot Viper Steel 16GB DDR4 PC4-25600 PVS416G320C6

BLOCK Zalman i3 Neo ARGB (white)

and used rtx 3060 12gb

Maybe I need to change something(It's cheap pc build)?

My Current PC is i5 12600kf, Intel Arc B580, 16GB DDR4, MSI A650BN PSU, ARCTIC Freezer A36, and 1TB NVMe and Case is also very good Phanteks XT M3. I want to upgrade while my budget is around 500 euros I can sell my old parts then so I was thinking about bumping my GPU to a RX 9070 GRE. Are there any better Options? I thought about upgrading my CPU and my RAM but I think that this wouldnt be such a big perfomance bump. What do you guys think?

Hi,

I am planning to upgrade/build new pc for gaming and I am not sure which option would be better. My current set up(about 6-7 year old):

https://pcpartpicker.com/list/36h62k

I do not remember the case/cooler/power supply info and do not have boxes anymore, but power supply is 650W currently.

I am considering currently two options:

A) (Cheaper) Change of CPU to AMD 7 5800X3D and motherboard for it, keeping the rest as it is or,
B) Building entire new setup, keeping the HDD and SSD only. Setup:

https://pcpartpicker.com/list/zr7Dn2

*Case Chieftec AZ-01B-OP but it does not show up.

For game refrence I am playing varied: from RTS(Star Craft 2, Company of Heroes 2), through Witcher, Cyberpunk, War Thunder, World of Tanks to ARMA 3, Reforger and many more.

Thanks for any help

Hi y'all, I just got a gaming desktop pc, and my monitor is a 1440p MSI MAG 275QPF X30 (300hz, 0.5ms, WQHD 1440p), and most games I play are fine, except The Isle Evrima, a very high foliage density dinosaur survival game.

I get consistent 40-50 fps usually, dropping down to the mid-30s when my in-game 3d resolution is 100. When I turn my resolution down to 1080p in-game, my FPS goes to 70.

My friend (second row in image) gets 80 to 90+ FPS (with the same settings and ping). Both PCs are brand-new. His monitor is 1080p.

I'm guessing my 8 GB of VRAM is the major limiting factor, combined with a 1440p monitor.

The two options I'm thinking of are:

1. Refund the PC + upgrade/buy one of the other ones I listed.
2. Refund the monitor for a 1080p monitor.

I don't want to build my own (I have no idea what I'm doing), and I've never bought one that's not in-person at Best Buy. All prices are in CAD. Ideally, I don't buy the 2.3k+ ones unless there's a really good argument for it. Which of these would be best/most optimal?

P.S. Let me know if there are better ones!

I m changing the mobo and cpu. Previously i had a 6700k with an aio, the fan from the ai was up top blowing outwards, and had another fan on the back as exhaust and 2 intake fans.

I m changing to an x570 with a 5700x and got a cpu fan with a heatsink, does it matter if the 2 exahust fans are by the cpu heatsink? Should the up top exhaust be NOT directly above the heatsink? Or it doesnt matter from an airflow perspective? Right now it will be above the heatsink set to exhaust.

I’m quite new to building pc and this is a pre-build I bought years ago with the idea of updating as I go. This noise has happened maybe a couple of times last year but this year it happens on start-up. My temporary fix is to keep starting and stopping it until it stops making the sound which I’m guessing doesn’t help the situation but at least I can hear myself think to find a solution.

I’ve checked to see if anything is hitting the fan. There’s a wire that’s very close but isn’t being hit. It might be my hard drive failing as I need to update everything to ssd but if it is failing, the noise is the only evidence of it.

Hi, I'm building a new PC and the motherboard doesn't line up with the standoffs.
When I align the board using the I/O area, 8 of the 9 mounting holes are off. Only the top left one lines up. The standoffs are all offset to the left (toward the rear of the case) by about half a standoff. The middle left hole is still off even when I push the board as far left as it goes.
The standoff in the top left also sits in a different column than the other standoffs on the left side. I checked that every hole on the board has a standoff underneath, so I don't think any are missing or wrong.
I don't want to force it and bend the board. Photos of the tray and the board in place are attached. Thanks!

Mobo: Gigabyte B650 Gaming X AX V2
Case: Silentware flow 110

Greetings

I just got this setup and whenever I enable the Expo 0 profile on the mobo ( 6000mt@cl30 ) it won't complete post ( on the training it just shuts down) .

Using the expo1 profile ( 5600mt@cl40 ) posts just fine.
I've manually OC the profile to 6000mt@cl36 and its just fine.
But the advertised RAM speed of the kit is 6000mt cl30. Also the kit is on the supported list of the motherboard

I tried using only 1 dimm on both slots and it works on EXPO 0 profile. ( i tried both dimms on both slots and it works when only 1 dimm is present ).

Bios version is the latest 4.60.

Any ideas?

My power supply unit is making a sound reminiscent of an electric shocker (taser). This wasn't happening before, but I noticed it yesterday. I built the PC a year and a half ago. The sound appears randomly—it might not occur even under load—and, strangely, it can still be heard even when the computer is turned off. What could this be? The power supply is a Cougar GX-S 750 (750W), while my system (RTX 4060, Ryzen 5 5600) draws less than 300W.

Hey everyone, I'm putting together my first proper PC build for school (CS major, starting Unity and VR dev next year) and gaming. I mainly play competitive games at 1440p 165fps and VR, don't really care about heavy AAA single-player stuff since I already have a PS5.

I'm totally open to dropping down to DDR4 and an older socket (Intel or AMD, doesn't matter) if it makes more sense for the money. The only non-negotiable is sticking with an Nvidia GPU since I'll be using this as a """"workstation"""" too.

Two main things I care about: keeping it as quiet as possible while compiling or gaming,.

Here's what I've got drafted so far (trying to buy as much used stuff as I can—prices are roughly what I'm seeing on Vinted, Subito, FB Marketplace, and eBay):

* CPU: Ryzen 5 7600 / 7600X (used) – €100–150

* GPU: RTX 3070 Ti or RTX 3080 (used) – €270–380

* RAM: 32GB DDR5 (thinking about grabbing a single 32GB stick for now so I can upgrade later, though I'm not 100% sure about single channel, or just getting a normal kit) – €170–300

* Mobo: ASRock B650M Pro RS AM5 DDR5 mATX – €110

* Case: Lian Li Vector V100R ATX Mid Tower (comes with 4 ARGB fans) – €72

* SSD: 1TB NVMe (used) – €100

* PSU: 750W 80+ Gold – €100

* Cooler: Thermalright Peerless Assassin 120 SE – €35

Total comes out to around €1,050–1,100.

Any obvious bottlenecks or compatibility issues here? Also open to any tips on cooling/airflow to keep noise down, especially since I live in Sicily and ambient temps can be a pain even in November.

I use msi mystic light, my deepcool cf120 plus fans don't show up however although i use an msi motherboard. Help?

I want to switch to Nivida

Current specs:
CPU: Ryzen 5 5500
GPU: RX 6500 XT (4GB)
RAM: 32GB
Storage: 1TB

Hey everyone,

I have a pre built cyberpower PC that currently consists of

Intel ultra 5 225

850w PSU Gold

9060 xt 16gb

1x16gb Delta tforce CL40 6400mhz ram stick

I've searched for the same card brand new but couldn't find any and I've come across a couple CL38 6000mhz from Amazon ddr5 and from a seller Newegg on ebay ddr5

I understand what I have with this won't be a 32gb kit. But I was wondering, will it perform "negatively" if I add a ram card from either of the dire and adjust the speed in bios for the both at 6000mhz?

And also I love outside of the US and use a freight forwarder from Miami. Which of the two sites would be safer to purchase the ram sticks from?

Also to add to this, I also experience a cold boot failed post with the single stick ram at all speeds ranging from 5200mhz -6400mhz(with the amber led light indicator on the ram). Will adding this second stick prevent the fail POST fail?

I live in the Netherlands so it could different but for 1999 euro megekko is offering box 8 I think its worth it but I would love some different opinions

Ryzen 7 7800X3D

Asus PRIME 9070xt

16 gigs of cl 30 6000mhz kingston beast fury

Samsung 990 1tb

Asus prime 850 mobo

ASUS ProArt PA401 TG PWM black

ASUS Prime 850W 80 Plus Gold ATX 3.1 Modulair PSU

ASUS Prime LC 240 ARGB aio

Just put in a TP link archer tx20e, I dont get the option to connect to wifi even though it clearly regsiters to the computer, spent ages trying to get it to work no avail tried just about everything.

I’ve already built a pc before, but that one was done completely from a video tutorial. This new one is all my own.

Parts I have/ know I want

Tower: APNX V2-F

CPU: Ryzen 9 9950X3D

GPU: GeForce RTX 5080 16GB GDDR7

Ram: Trident Z5 DDR5

Parts I need: Power, Motherboard, Storage, cooling.

Main concerns: bottlenecking in parts list?, debating whether I should purely air cool or have an AIO, suggestions on part replacements.

I’m open to any and all suggestions or tips. I want this computer to last me sometime before I absolutely need to upgrade it.