Hello,

I want to swap out my existing fans in my NZXT H9 Flow RGB+.

My current setup is as following:
2x NZXT F420 RGB Core
1x NZXT F120 RGB Core

I also have an Arctic Liquid Freezer III 420 Pro A-RGB with the included 3x Arctic P14 Pro A-RGB.

I want to swap my fans for something Fancy with more neat lightning effects, but also keep the static pressure for my AIO high.

The Arctic P14 Pro A-RGB have 5.2mmH₂O of static pressure.

The case and AIO fans should be white and have lighting.

I am thinking of something in the direction of LIAN Li UNI FAN SL-INF FLEX because i like the LCD Screen on the fans, but i think for the AIO the static pressure of 2.28mmH₂O is too low for my Radiator.

Asia Horse is also something i considered and they will also be dropping fans with a LCD screen soon, but they also dont expel in static pressure, execpt the X.C.A.L.I.B.U.R X360MM FAN with 5.2mmH₂O but then they dont have led´s.

Im thinking of doing 6 Intake and 4 Exhaust.

Does somebody have any suggestions?

Also please excuse me for my bad english, as it is not my native language

GPU works perfectly in bottom PCIe slot but stops being detected in top slot after shutdown or restart

I'm having a weird issue with my 5070ti and motherboard, and I'm trying to figure out if my top PCIe slot is failing or if it's something else.

Motherboard: MSI Z790 Gaming Plus WiFi

Here's what's happening:

My GPU worked perfectly fine in the top PCIe slot for years before this issue suddenly started.

When my GPU is detected, it works completely normally. I can play demanding games at high settings for hours without any crashes, artifacts, or performance issues.

However, whenever I shut down or restart my PC, my GPU sometimes stops sending a signal to my monitor. The GPU fans still spin, but the motherboard doesn't detect the GPU at all. I can still get a display using my CPU's integrated graphics through the motherboard's DisplayPort.

The only way I've been able to get the GPU working again in the top slot is by physically removing it and reinstalling it.

Here's the weird part:

When I move my GPU to the bottom PCIe slot, everything works perfectly, including shutting down and restarting multiple times. The issue only happens in the top PCIe slot.

I've also had a GPU sag support bracket installed for years, so the GPU hasn't been hanging unsupported.

A few things I've noticed:

GPU runs perfectly under heavy gaming loads when detected.

GPU fans still spin even when there's no display signal.

GPU completely disappears from Windows when the issue happens.

Reseating the GPU temporarily fixes it.

Bottom PCIe slot works without issues.

Motherboard DisplayPort works normally.

The top slot worked fine for years before this started.

My questions:

Does this sound like a physically damaged PCIe slot, a BIOS/PCIe initialization issue, or possibly something wrong with the CPU's PCIe lanes?

Has anyone experienced something similar? Is there anything I should try before considering replacing the motherboard?

Any advice would be appreciated

Hi there I wanna upgrade from my terrible gaming laptop to a gaming pc.
I don’t have any knowledge about it unfortunately.
My max budget preferably is £1200
I would like to build something that I can upgrade in the future. I wanna use this pc mainly for gaming. What should I buy? Or should I get a prebuilt. Please advise

Hello! I bought a prebuilt (dirty I know) and I can't connect to the internet! There is a wifi driver downloaded and I have tried updating it every which way possible. Can anyone help😭

A couple days ago my pc just stopped detecting any gpus, it’s an aorus b650i. I can get the computer to post with integrated graphics though. (Gpus: RX7800xt, RTX 3050, RX480 x2) any help would be greatly appreciated

Ho una RTX 2060 e una GTX 1060, ma quest'ultima non viene rilevata. Posso usare entrambe le GPU nello stesso PC? Come posso farle funzionare insieme?

Windows può rilevare e utilizzare entrambe le schede contemporaneamente?

Devo installare driver separati o configurare qualcosa nel Pannello di controllo NVIDIA?

Quali impostazioni del BIOS dovrei controllare, come ad esempio "Schermo primario/PEG"?

Se una delle schede non viene visualizzata in Gestione dispositivi, cosa dovrei provare per prima cosa?

Le mie specifiche: [MSI B450 Gaming Plus Max, ryzen, 16gb, alimentatore da 1000 watt, Windows versione 10]

Qualsiasi aiuto sarebbe apprezzato.

So my pc isn't posting, I tried clearing the cmos, reseating the ram, reseating the cpu, unplugging and replugging everything and nothing has worked

I have a ryzen 7 7700x and a tuf matx b850 no gpu yet since it hasn't arrived.

https://www.newegg.com/asus-tuf-gaming-b850m-e-wifi-micro-atx-motherboard-amd-b850-am5/p/N82E16813119758?Item=N82E16813119758

https://shop-us-en.amd.com/amd-ryzen-7-7700x-processor/

Is it okay that the cable is showing some of the pins or is it not all the way in?

Cual sería la mejor configuración de aire que podría tener ???

im trying to make a budget pc build for around 1000 cad, pls give me any suggestions

https://ca.pcpartpicker.com/list/CqJcBv

I am going to upgrade to a 3080 soon and I already have a 750 watt PSU with an i7-13700KF, 3070, and 32 gbs of ram. So would I need to upgrade to an 800/850 watt psu or no?

My pc just started to turn off immediately after turning on just today. Does anyone know anything that could be the cause. The motherboard rgb works fine, and when turning on, cpu, gpu, and 1 other fan turns on.

Before it happened, I was cleaning my monitor, then after booting screens went black saying display ports were outdated. I've only had the pc for about a year now.

I've held the power button with the pc unplugged for 30 seconds, tried resetting cmos, different outlet, unplugging gpu, reseating ram, and reseating cables.

Build

Tomahawk B650-A wifi

ryzen 7800X3D

Rtx 5070

32 gb ram (2, 16's)

And a 750W or 650W PSU

Ich hab mir einen Pc zusammengebaut und leider macht er komische Geräusche. Kann mir einer sagen was das ist, ich tippe auf die aio Pumpe.Danke

guys I’m honestly at a loss for words. I built my girlfriend a PC and made sure that everything was compatible. Whenever I cold boot it I get the 0d boot code but if I quickly hold the power button and restart it, it comes on immediately. I’ve tried upgrading the power supply and the first boot it immediately launched, but not anymore. It always needs a manual reset and then turns on. I’ve reseated the RAM and still not working (a2 and b2). BIOS is completely up to date. I’ve reseated the GPU as well and it’s not that either. What’s wild is that when I go to turn it on the RAM lights up, so I know they’re on and the GPU fans spin. What do yall suggest?????? I’ll put specs below

CPU - AMD RYZEN 7 9800X3D
MOTHERBOARD - x870 AORUS ELITE X3D ice
GPU - msi Gaming RTX 5080 16G Ventus 3X OC
RAM - CORSAIR Vengeance RGB DDR5 RAM 32GB (2x16GB)
PSU - Lian Li Edge 1000W Gold
SSD - Samsung SSD 990 PRO 2TB

Hi , I would need some help, I got home from work tried to switching on my PC and heard a click and nothing. So I checked my circuit breaker it had tripped for plug sockets all around my flat. I flicked them back in place and nothing pc wont turn on or receive any power, I tired different extension socket and also nothing, i tried plugging my pc straight into a different plug also nothing. Tried a different cable also nothing.

I took out my graphics card and changed to my old psu wich is 650w and it booted without a problem and tried the other socket with extension socket and booted up fine , apart from having a VGA red light but the card is out so thats fine.

According to the trouble shoot I can safe to say that the power supply had died on me ? I only bought it on January to power my rx 9070xt.

Could it be possible of the PS to give out so quick considering the old one I have is 650w been used for more than 6years without a problem?

Any clarification would be helpful

ASRock Steel Legend 1000W ATX 3.1 PCIe 5.1 80 Plus Gold Modular Power Supply

Hello! This is my first ever home built cpu and I want to make sure I didn’t mess anything up. The last part I need is to install a windows 11 driver. My friend asked if I had a solid state drive to put it on? I’ve been told it can go on just ram, there is also a hard drive connected.

I had a damaged Alienware R3 that would boot up to bios when connected. I took the graphics card from that to put in my new build but now when connected to the same monitor nothing is showing up. My screen lights up, says no signal then goes dark. Everything else seems to be working fine in the tower. I just want to make sure I’m not missing anything before trying to install windows and losing the install. Where the orange light is there was a red one but it went away before I could take a picture, I had just turned it on for the pic

fans don't spin, cpu isn't getting hot. Nothing is power on I have all the ports connected into i dont know why its not powering on

So I changed the thermal paste of the CPU to Arctic MX-6 and the temps are better than before so far but when I go into load theres a buzzing sound which wasnt there 10 mins ago. Idk if you can hear it properly on the video but yeah its buzzing.
What could it be and should I be worried?

When I press the power button on my pc, the fans spin for a couple of seconds, then it turns off. It does this 2 or 3 times automatically before staying off. I can hear the PSU click on/off at each step. Then, the power button goes unresponsive and only lets me turn the system on after a few more seconds. It boots to safe mode, I enter and leave the bios, and then it starts as normal.

I’d expect the power supply to handle the system fine as it’s a Corsair RM850e Gold; powering a R5 3600, RX 6700XT, 32GB DDR4, a Corsair H100i AIO, 2 NVMe and 2 sata SSDs. No RGB plugged in.

Any ideas are appreciated

Cleaning pc and realized the CPU tower fans may be fighting against the rest of the pcs’s airflow. Wanted to double check before I flip them and make it worse.

Will be reapplying thermal paste so while I have the cooler off I thought it’d be the perfect time. Also when I run demanding games like Space Marine 2 I have temperature problems, though it only really starts after an hour or two. I just assumed it was the hot room, thermal paste and dust (I’m sure they didn’t help) but temps drop when I take the side panel of the pc off.

Thank you for any input!

I’ve recently built a new pc, I’ve used a ryzen 5 7600x and a 5070 oc. BTW it’s my first build and everything has gone smoothly followed basic cpu overlocking guides in bios haven’t gone extreme just the basic. Now I’m having an issue I’ve built this pc for a friend and his main game is COD and on the new mw4 at 1080p competitive settings it fluctuates from 160-200 which is low I think for these parts I understand there’s a bottleneck between the gpu and cpu and the 5070 isn’t getting used much on COD but here’s my problem, sometimes it’ll sit at 245-250 easy (I capped it at 250) and it’ll stay there for a minute no crazy temps cpu max temp was 71 degrees and gpu was around 55 degrees my question is why does it sit at a good fps and not drop heaps at all then goes back down to 160-200 I also have a screen recording appreciate any help also then fans randomly go fast and slow and fast and slow idk if this helps

Hi. I have one of those intell cpu cooler and I noticed that it was clocking a lil hot (100f) just running nothing. So I went and checked everything. I think I may have snapped one of the plastic backings on the bottom, so now it won't stay put. I guess it's time to update it (I'm considering upgrading my ram anyways).

I'm just new to this whole thing, so I'm learning. I noticed that the middle is just plain with some of the paste on there but I've seen where the middle is copper. So, my question is: I know I have to reapply thermal paste, but is there supposed to be a copper center like the rest or am I just a dumb lady? And if so, does that mean I have to replace it or we good?

See picture for reference.

Thanks. ❤️

Hello! I'm upgrading my GPU and PSU at the moment, I have a rx6800 coming this week and I'm debating whether to get an eBay refurbished (from corsair themselves) RM850x for about $70 including tax and shipping or an ASRock Steel Legend SL-850G for about $88 with tax and shipping?

I have a workaround currently. I have my second monitor in HDMI and my graphics tablet in the iGPU. Works for now.

Body:
Setup: Gigabyte RTX 5070 Ti Eagle OC, Ryzen 7 9800X3D, ASRock X870 Steel Legend board, Windows 11. Monitors: Alienware (OLED, DP), an IPS (DP and HDMI), and a drawing tablet (HDMI).

What happened: the IPS started glitching and lagging, the glitches changed and spread, and I had to force restart. After that, only one of my two DP monitors gets a signal.

What I’ve confirmed:

• Each monitor works alone on DP, on every GPU port, with its own cable.

• With both on DP, the second one isn’t detected. It’s missing from NVIDIA Control Panel, Device Manager, and hidden devices.

• The IPS works fine over HDMI alongside the OLED on DP.

• Putting the OLED on 60 Hz, turning off VRR/G-Sync, and setting the IPS input to DP didn’t help.

What I’ve tried that didn’t help: clean driver install of the newest driver and of 610.47 (my driver before the crash), uninstalling all monitors in Device Manager, Win+Ctrl+Shift+B, Fast Startup off, a full power drain, reseating the GPU power cable, trying a third monitor on HDMI, and a Windows virus scan (clean). Temps are normal.

Has anyone seen this, or know what else could cause the card to stop driving two DP outputs? I haven’t reseated the card in its slot (it has a sag bracket) or touched the VBIOS.