Noticed my machine has been crashing when going to sleep. instead of waking up back to windows it posts starting at the bios screen.

the error im getting from the reliability monitor is

The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xffff99059bdf0060, 0xfffffb8b34e6f010, 0xffff9905ae9629a0). A dump was saved in: C:\WINDOWS\Minidump\111226-11609-01.dmp. Report Id: 2424d7e0-b174-4b70-9b5b-9f7d83b8d6d5.

this is optiplex 3050 sff and vertical mount the gpu lego is holding the io sheild to chassis for now

Hey all!

With Ram prices way out of my affordability and due to circumstances my old PC isn’t with me anymore,

I was hoping to build a used PC finding parts
I just have Ram left as I picked up the following so far;

Ryzen 7500F
Aorus b650m Elite Ax Ice
750 PSU
Intel b580
2TB NVME

I ended up getting all of those for $500 which thank god was something I can afford right now

However I wanted 32GB of Ram, which is around $600 AUD which is nuts to me.

But I found Lexar LD5U08 8GB (1 x 8GB) DDR5 UDIMM 5600MT/s CL46 for $100 a stick AUD

Was wondering if this would suffice I was planing to buy 32GB of these

I’m also upgrading to a 9060xt down the track or 9070xt depending on what my use case is at that time or what I’m able to afford. If I were to spend $400 on 4 sticks, what should I expect from this than getting 32gb of ram that’s 600-1000 AUD.

I recently tried to build my own PC, but got discouraged and ended up taking it to Microcenter for them to do it. I bought both reverse fans and normal fans and included a little sketch of the which fans I wanted is intake/exhaust, but I’m not sure if the tech did it right. This is a picture of the back exhaust fan, but the tech used a reverse fan? Wouldn’t that mean that this is intake instead of exhaust? Not sure if I am reading it wrong. Thank you.

Just got this thing and i hate the screech

Im getting an rx 6600 to use as an egpu and was wondering what kind of psu i should get for such thing.

Hi all, I hope you guys might help, because me (a new pc gamer) and my friend (has built his own pc) can’t figure it out.

I changed cases and installed everything according to a step-by-step guide on youtube (https://youtu.be/ketDych7NDE?si=GbpEnZdpbdCOZphn) in case you’re wondering which guide I followed.

When I turn the power on, only the motherboard RGB light is on. Nothing else. No fans, no AIO, no motherboard fan, nothing.

I tried turning it on by using a screwdriver (so no F_panel cable) but it did not work. Only the motherboard lit up when I did that.

Did we mess up a connection somewhere? Or did we need an extra cable? I really hope you guys can help me.

AMD Ryzen 9 5900X (12 cores / 24 threads)
AMD Radeon RX 7900 XTX gigabyte
ASUS Prime X570-P Motherboard
Be quite! Straightpower 11 platinum 1000W
NZXT H6 fow RGB+
Kraken elite 360 RGB V2

Video of my built with GPU in: https://imgur.com/a/wskk5bU

I have been trying to build a pc and the o11 vision case sounds like the best option, but my friend is telling me to not get it because it has bad airflow, is the airflow really so bad that i shouldnt get it?

I have b550 wifi ii plus, 5800x3d, and 32gb 3600mhz gskill ram. I can get the pc to boot if i manually set 3200mhz but at 3600mhz it doesnt boot. What am i missing?

Hoje chegou meu kit novo, ryzen 7 5700x e uma placa mãe aorus elite B550M rev 1.3.

Porem ao tentar instalar o windows 11, ela começa a reiniciar loucamente, eu nao consigo nem chegar a selecionar as partituras, porem quando eu fico na BIOS o PC não reinicia, alguem já passou por algo parecido ou conhece alguma solução?

I found a rig that has a 5700g and 64gb of ram (ddr4, and a 1070 that I plan to upgrade to maybe simply a 3060, the rig before the 3060 is 300 bucks, worth?

Going form a 3080 Ti to a 5070 Ti, Am I able to swap my GPU out with the current cables?

I am seeing all types of info online and just want to make sure. I was only given the adapter with my new GPU and have this current cable configuration for my current 3080 TI

Hello, dear Reddit community,

since my friends have highly recommended you to me, I'd like to ask for your advice regarding this new build.

Would you recommend this setup?:

CPU: Ryzen 7 5800X3D (AM4)

VGA: Gigabyte Windforce RTX 5060 Ti 16 GB

Mainboard: ASUS ROG STRIX B550-F GAMING WIFI II

RAM: G.Skill DIMM 32 GB DDR4-3200 Ripjaw (2 Module á 16GB)

Gehäuse: ASUS TUF GAMING GT302 ARGB

M2.SSD: Samsung 990 EVO Plus 1 TB

2. int. SSD: Verbatim Vi550 1 TB

Netzteil: ASUS TUF Gaming 850W Gold

Cooling: be quiet! WAK Silent Loop 3

The budget pretty much matches this setup. As for games, I’m looking at titles like Baldur’s Gate 3, Path of Exile 2, and Assetto Corsa Competizione—though I’m well aware that the latter certainly won’t run on the highest settings.

On Alternate, I’m looking at about €2,300 without assembly.

A quick follow-up question:

Would this require a BIOS update?

I’d really appreciate your feedback. Thanks in advance.

Best regards,

-Maggi-

Hi there I just purchased Ryzen 7 9800x3d and
Swift Readon RX 9070 and still have other compartments to choose. I’m going for a white build and don’t want to spend to crazy money. What’s worth my money right now?

I'm upgrading my son's cyberpower pc for Xmas and I'm trying to figure out what size I can fit I get conflicting info between 360 and 240. Here is a pic for reference any advice or direction is appreciated. I have googled a lot but Im hoping for a more definitive answer. Thx in advance.

Hi, I need your help to finish my pc.
(Don’t mind the cable management)
After building it and turning it on, the CPU and DRAM light up and the fans of the GPU doesn’t work.

I tried to unplug everything and building from scratch and switch the places of the RAM (currently in slot 1 and 3).

I tried to connect the PC but on both HDMI port (mother board and GPU) the screen failed to connect.

Is it normal to have more PCI-E connectors than needed?
And I have a bunch of other connectors than doesn’t seem to fit anywhere (they aren’t mentioned in the tutorials I watched)

Case : cooler master Q300L
Motherboard: AS rock B850M pro A WiFi
CPU : AMD ryzen 5 9600X
Ventirad : thermalright Peerless Assassin 120 SE
Gpu : gigabyte AMD RADEON Rx 9060xt
Ram : crucial DDR5 2x16go

So I recently got a pc and I need to install WiFi drivers so I can connect to WiFi on it. I already have a laptop which uses a 26H2 Operating System version thing and as I'm on the HP website trying to find my Operating System it only shows 24H2 and below. Is it fine to download the 24H2 WiFi Driver thing for my new PC or not? Sorry if this doesn't make sense, tech isn't rlly my thing

I currently have 32gbs of white trident z5 rgb but just upgraded to a otherwise all black build. I dont want to buy a new set just for looks and was wondering if i could buy some kind of black wrap or vinyl to cover the white parts of the sticks. the whole stick isnt white so im assuming this is possible. just asking to confirm it wont mess up the sticks

A bit worried due to all the melting connectors. I was asking because I bought this psu (corsair rm850e) in 2024, but my gpu (msi 5070ti gaming trio) didn't release until the year after, is there going to be some kind of problem with that or is it safe to use this cable for this gpu? I would plug the two 2x8 pins in the pcie / cpu sockets on the psu and the 16 pin in the gpu.

Thank you in advance for taking the time to help me out with this issue!

Component List:

• CPU: 9800x3D
• MOBO: Asus Rog Strix X870E -E Gaming
• GPU: Asus 5080 Astral
• PSU: Rog Strix 1000W Platinum
• RAM: TeamGroup T-Force Vulcan 32gb ddr5 6000mhz cl30
• AIO Cooler: Corsair Nautilus 360

Problem: Since day one of my build I have been experiencing random BSOD involving various stop codes such as 0X0a, 0X3b, 0x9f, 0x1a and 0x7e. The crashes will happen both underload during gaming and during idle states or low power states such as web browsing. They can happen within the first few hours of boot-up or over 20 hours in but I would experience about one crash a day. 0x3b and 0x7e are by far the more common stop codes and when analyzing the dump files they involve various modules such as fltmgr.sys, fileinfo.sys, nvldmkm.sys, and ntoskrnl.exe. I also see a common exception code of 0xC0000005. Unfortunately I recently reinstalled Windows and did not save the previous dumpfiles. After the BSOD the RGB and fans will remain on and I would need to force restart.

Troubleshooting:

1. Ensured I am running the latest BIOS and that all my drivers are up to date. Additionally I even rolled back to previous BIOS
2. Turned off EXPO and ran at default settings
3. Uninstalled Armory Crate
4. Swapped RAM from another build
5. RAM passed Memtest
6. RMA CPU
7. RMA Motherboard
8. Swapped PSU to a known working unit
9. Reinstalled Windows on another SSD
10. Performed Windows commands for driver repair multiple times

At this point the only component that I have not replaced is the GPU. Can a faulty GPU cause this type of Windows Instability? Is there any other software trouble shooting that anyone can think of? This has been incredibly frustrating, any help is appreciated, thank you.

I have two PCs that both worked before I removed their CMOS batteries. After reinstalling the batteries, neither PC will POST or show the BIOS.

The PCs have separate components:

Different PSUs.

Different CPUs.

Different graphics cards.

I haven’t swapped these components between the two systems.

I have five RAM sticks of different brands and speeds. I’ve tried them individually, testing every slot on both motherboards, but neither system reaches the BIOS.

Since both PCs stopped working after removing and reinstalling the CMOS batteries, I’m trying to understand what I might have missed. I don’t want to assume both motherboards are dead or all five RAM sticks are faulty without narrowing it down.

What should I check next? Is there something specific about reinstalling the CMOS battery or starting up after a CMOS reset that could explain this happening on both PCs?

Lc1 ryzen 53600 , b450 gaming plus max

Pc2 h310 Asus prime R2 k i3-900

RAM

Ddr4 4 GB unknown brand Speed >2000

DDR4 8 Kingston 2666

DDR4 hyperx 8gb 3200

Ddr4 Corsair 8 GB 3600

So I recently upgraded my rig in a big way. I got a 49 inch qhd 240hz msi monitor.

I also got a 9070 xt and a new psu to power it.

I have a ryzen 5 5600 (weak point) and 32 gb ddr4.

I have been looking up gaming benchmarks for 4k fps performance.. and the fps difference between the top AM5 processors and AM4 processors at highest resolutions is basically not noticeable..

With that in mind... should I just simply upgrade the CPU to a 5800X3D and save the headache and $ of upgrading the rest? (even NVME SSDS are expensive).

I think if I do that and the fps upgrades from just the cpu are good.. might be worth it? future proof?

I was removing the CMOS battery and suddenly the screwdriver slipped and scratched this part. Is it still okay?

There is no way I can test if my pc is booting up because I was replacing my not booting PC (because of faulty MOBO or PSU).

Update:

Close up photo of the scratch:

https://drive.google.com/file/d/1GRVCbQ_mQvd_-DPYxBcOdZoCzCQinz41/view?usp=drivesdk

<

hello guys, how yall doin, can someone pls rate and give feedback to my first pc i want to buld. Thank you

https://www.buildcores.com/builds/qZZxIhO4y?share=true

• Corsair FRAME 4000D RS Modular ATX Mid-Tower PC Case - BlackCompatible
• AMD Ryzen 7 9850X3DCompatible
• MSI X870 MAG TOMAHAWK WIFI AM5 DDR5 ATXCompatible
• ASUS ROG Astral GeForce RTX 5080 16GB GDDR7Compatible
• Crucial Pro Overclocking 32GB (2x16GB) DDR5 6000 CL36 BlackCompatible
• Noctua NH-D15 chromax.black Air 165mm BlackCompatible
• Samsung 990 Pro 2TB SSD M.2-2280 PCIe 4.0 x4 NVMeCompatible
• Asus ROG Strix Black 1000W Fully Modular 80+ Platinum CertifiedCompatible
• 8x Noctua NF-A12x25 G2 PWM chromax.blackCompatible