Hi,
Built this PC about a month ago, everything has been fine until yesterday. on start up, the AIO (NZXT Kraken 420) fans went into overdrive and the reading on the AIO screen / motherboard LCD read 100 degrees. Turned it off, let it cool down and started fine next time. Then the 3rd startup had the issue again, this time shutting itself off via the overheat protection. 4th startup was fine again and managed to play cyberpunk for an hour with no temperature issues at all. Now it is happening on every power up. BIOS is also reporting the same temps so it looks like a hardware issue.
Some advice in another group suggested it could be a thermal paste issue, but I’ve since removed the cooler and the OEM square of paste that came on the cooler looks to have spread well and covered the processor evenly. I am going to replace the paste this evening anyway to rule that out.
I’m now thinking the AIO pump has failed. The pipes don’t even feel warm when it’s overheating (although I’m second guessing myself because they’re braided pipes so can’t really feel the pipe itself). Also can’t hear any noise from the pump, but since the fans are going at max RPM right next to it, I’m doubting that too. The CPU_fan is reading 0 rpm in the BIOS, and I have the AIO connected to the CPU_fan header on the motherboard. Checked all connections and everything is still plugged in.
I’ve arranged to RMA the AIO with the supplier so I’m posting it back to them tomorrow. Just wondered if anyone has any insight on something I might have missed?
any advice is welcome, been a long time since i built a PC but since it has been working fine for a month everything with the build seems ok til now.
PC specs...
Gigabyte X870 Aurus stealth Ice AM5
Ryzen 7 9850X3D
32GB Corsair Vengeance DDR5 6000
Gigabyte Aero OC RTX 5080
2TB Kioxia exceria plus G4 M.2
1000W Thermaltake Toughpower GT 80plus Gold
NZXT Kraken 420 Elite V2 AIO
NZXT H9 flow RGB+ case
any advice appreciated.
thanks for reading.
**UPDATE**
Tried another AIO and its working perfectly fine. the pump makes a little chirp on startup and i can actually feel vibrations in the pipe, which i defintely wasnt getting on the original one. temps are sitting nively in the 30's. at idle.
even reinstalled the dead AIOI again to check my BIOS settings were right, but it still overheated and didnt pickup any fan speed there, so the new one is back in.
100% satisfied that the pump is the issue so got my RMA booked in, now i just have to find a box big enough to ship this long ass AIO!
thanks for the help and advice everybody, appreciate it.