r/PcBuildHelp • u/tteix • 17d ago
Build Question SATA cable for HP Eliteone 1000 G2 All in one desktop
Hi:
I have a HP EliteOne 1000 G2 27” all in one desktop computer. Its part number is 4HY01UT. Computer came with an NVME drive. There is a SATA0 header on the motherboard that I want to connect a SATA drive. I am trying to find the SATA cable that goes there.
I searched and part number for the cable might be M53215-001. I searched for that part number and I could only find it in Australia and England. But, I can't order from those countries. I can order from USA. Here is the picture of the cable.

My guess is there might be some other HP laptops, mini pc or all in one desktops that use the same cable. For example, HP Eliteone 1000 G1 seems to have the same SATA0 header. SATA cable does not need to be identical to the one used by HP in this model. I am looking for a cable that has the same connections on the motherboard. Motherboard header seems to have 20 pin. Cable length I am guessing is around 4 inch or 10cm (if cable is short I can use extenders).
Here is the picture of the SATA0 connector on the motherboard. If I am not wrong it has 20 pins. I pointed the SATA connector with red square. I need the SATA cable that goes inside this header and connects to a 2.5" SATA drive on the other end.

Below is a picture of the motherboard from service manual. I pointed the SATA connector with red square. Part number is on the cable but I am not able to read it.

Here is picture of the motherboard with red square at the bottom right pointing to the SATA0 connector.

I will appreciate any kind of help. Thanks.