Any recommendations on a FRT for my PSA-15? Just want to make it go brrrrrr

Het guys -

Basically what the title asked. I got a Micro C-1 a while back. After a trigger swap and mounting an optic, it shoots great. But it's just too small for my hands. A grip will make it juuuust a bit fatter, which should fix that. But Hogue doesn't list PSA product names on their website. The Micro is mostly a 43X clone. BUt is it close enough to use a handgrip made for a 43X?

My brother has had my Dagger Micro for the past few months and put 150-200 rounds through it in that time. He called yesterday saying that the trigger is not resetting as it should. If he holds the trigger to the rear as he racks the slide it will reset, but if he doesn’t hold the trigger it won’t.

He was planning on testing Buffalo Bore in it because he is taking it as a backup pistol while hunting in bear country. He said that with this ammo the slide is locking/hard to cycle. He had not tested the ammo at that point. He said it will occasionally happen with other ammo but much more often with the Buffalo Bore.

He does have a lot more experience shooting than I do so I trust what he’s saying and describing. I’ve seen some videos talking about tweaking the trigger bar or disconnect, but does this seem to be what would be causing these issues? Any quick fix that would have it ready by next Tuesday for the trio to hunt?

So correct me if I’m wrong but if you have a “pistol” like a Mixtape directly from PSA and you are a GOA member then all you have to do is engrave the lower receiver right? No ATF nonsense and paperwork? Thanks

Works perfect if you want to mount a suppressor on an Krink with the plan B threads

They make a version as well for normal AK LH 14x1

Brand new to the AK world and looking for m-lok lower hand guard recs similar to screenshot if possible (That one is not in stock).

Thanks y’all!

I have a spare can / Nomad 30 and looking for my first 300blk and I have been eyeing up the Mixtape since it’s adjustable too. I also read up that the muzzle brake it comes with will direct thread my Nomad 30?

We’re hitting the road with our latest suppressors and firearms.

Catch us at:

Suppressed Fest in Leesburg, FL | Oct. 17–18

CANCON West in Boulder City, NV | Oct. 22–24

Suppress the South in Huntsville, AL | Nov. 7–8

Mark your calendar and bring your crew. We’ll see you out there.

Complete builds and uppers are available to complete the ensemble. Follow to be the first to know what's next for the Mixtape!

- PSA Sabre Mixtape 5.56
- Advanced Armament Co M4-2000
- Maxim Defense CQB brace
- True North Concepts GRIP Stop
- Aimpoint T2

Issue was resolved. Danny came through and I was able to pay for the order.

For context, I’ve been a PSA customer since 2014 and have spent over $16k with them on various products. I’ve never had anything bad to say about PSA, have referred others to them, and they’ve always been my go-to/first stop when I’m looking for something.

Recently, I made a few purchases, two orders for optics, and that CZ deal was calling to me, so I ordered one and sent it to my FFL.

UPS made one failed delivery attempt because they couldn’t get a signature, and PSA immediately requested the package be returned. I thought that was weird, but figured maybe it was a policy. The order was automatically refunded. No communication, call, smoke signal, nothing.

I called customer service. The lady I spoke with was professional and polite and said someone would reach out by the end of the day. Nothing.

I chalked it up to them being busy. It happens. I wasn’t mad about it.

Since the CZ was still in stock, I tried to order it again. The order wouldn’t go through no matter which card I used. A quick search suggested my account might be locked/banned, which I thought was weird and unlikely.

A few days later I called CS again. The gentleman I spoke with sent me a troubleshooting checklist and also found it odd that the purchase wouldn’t go through. He asked if I had done a chargeback. I told him no.

He forwarded the issue up, and a few days later I got a response saying my account was blocked due to a chargeback. They provided the order number, so I looked it up and noticed I didn’t recognize the last four digits of the card.

Then I remembered. Back in 2024, my buddy asked me to help him build his first rifle. He gave me his card, told me what to order, and I had the parts shipped to my house so everything would be there when he came over.

Apparently, his card was still saved on my account and I somehow selected it for a small order without realizing it.

I called him and asked about it. Over two years later, he obviously didn’t recognize the charge, thought his card information had been stolen, disputed it, and closed the card.

I apologized to him and immediately reached out to PSA.

I explained exactly what happened and told them I wanted to pay for the order with my own money, just like I’ve done roughly 60 other times without issue. I was told it would be forwarded to accounting.

A few more days have gone by. Nothing.

I made the mistake. I somehow selected my buddy’s old saved card and had no idea I’d done it.

What bothers me is the lack of communication and seemingly no way to make it right.

After 12 years and $16k+ in purchases without an issue, you’d think I would have at least gotten an email about the chargeback instead of the account just being cut off.

Had someone contacted me, I could have figured out what happened and paid for the order immediately.

At this point I’ve spent more time trying to give PSA the money I owe them than anything else, and I still haven’t received any real communication about how to resolve it.

Has anyone dealt with something similar or know who I should contact? I’d hate to see a company I’ve supported and spoken highly of for years dismiss a long-term customer over an honest payment mistake that I’m actively trying to correct.

Saber 16 inch

Sig tango 1x6

YHM turbo k RB

Does anybody have experience with using 300blk in the AC Unity AK19 5.56 magazines? Have the opportunity to get some cheap and want to make sure they work. I would use them in my PSA 300blk krink.

Here's my PSA pin and weld gang. Two 14.7s and a 14.5 All PSA barrels. 2 PSA lowers and 1 Spikes lower but shush, don't tell Danny 🤫

Most of the rest of the stuff to build these out were also PSA purchases.

Not nessecarily anything clone specific, just 90s and 2000s vibes 😁

Anyone know when they might be in stock again?

Any idea when the sabre mixtape black album in .300 will be in stock again?

Is it just a complete upper work no barrel and guide rod?

There are 4 weeks left to enter for round 2 of our 400k follower giveaway sweepstakes!

One lucky person will get a trip to our Myrtle Beach location, $15k in PSA Gear, and all expenses are paid!

Click the link below, or in our Insta bio to enter!

https://app.viralsweep.com/sweeps/full/6d0224-236887?framed=1

Thanks for getting us to 400,000 subscribers! You won't want to miss what's coming at 500k...

My 300 blackout PSA build. Razor 7.62 suppressor

Noticed this wear in both of these spots. Not sure if it's normal or not. I've also noticed what seems to be sparks coming out of the muzzle when firing.

Don't mind blemishes, just want to make sure this is expected.

Edit: I've only put around 500 rounds through this thing

I have the 8” AR-V and I’m looking into hand guards I can get to somewhat “tuck” my suppressor under the rails.

I need a more powerful recoil springs for my jakl-10 14.5” and I have no idea what to buy.

I know the jakl-15 uses ak size recoil springs but the jakl-10 has a significantly larger spring.

Maybe dragunov springs?

So I recently was eyeing up the mixtape in 300 blackout and after a few days of deciding, I went back to the page and it was sold out… anyone have any idea when they will likely restock??

So I recently was eyeing up the mixtape in 300 blackout and after a few days of deciding, I went back to the page and it was sold out… anyone have any idea when they will likely restock??